Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 1

Find the listing of 3D models of inline tube adapter with side A outer diameter 100 to 150 mm, sorted in ascending order. This listing has 5 pages.

You can also run a model search here

Model(s) 1 to 30 of 131

1 current
2
3
…
5

Tube adapter STL file ⌀ 100–51 mm (Length: 160 mm) (📦 #1098)

1 object(s) - format STL (5.0/5) 3 vote(s)

Diameter adapter ⌀100 mm to ⌀51 mm in STL format. Total length of this reducer is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are off-center by 25.4 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	60	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	40	mm
side B outer diameter	51	mm
side B thickness	5	mm
transition length	60	mm
axis offset	25.4	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)

1 object(s) - format STL (4.9/5) 8 vote(s)

Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to make tube connection easier.

Parameter	Value	Unit
side A length	10	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	20	mm
side B outer diameter	60	mm
side B thickness	2	mm
transition length	40	mm
axis offset	15	mm
ends fillet	fillet on th...

Tube adapter STL 3D file ⌀ 100–51 mm (Length: 160 mm) (📦 #1340)

1 object(s) - format STL

Straight tube fitting ⌀100 mm to ⌀51 mm in STL format. Total length of this sleeve is 160 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The two axes of the tubes are off-center by 25.4 mm. The ends are raw.

Parameter	Value	Unit
side A length	60	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	40	mm
side B outer diameter	51	mm
side B thickness	5	mm
transition length	60	mm
axis offset	25.4	mm
ends fillet	no fillet

Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)

1 object(s) - format STL

Inline tube coupler ⌀100 mm to ⌀16 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.

Parameter	Value	Unit
side A length	10	mm
side A outer diameter	100	mm
side A thickness	3	mm
side B length	30	mm
side B outer diameter	16	mm
side B thickness	3	mm
transition length	100	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)

1 object(s) - format STL (4.7/5) 3 vote(s)

Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.

Parameter	Value	Unit
side A length	10	mm
side A outer diameter	100	mm
side A thickness	3	mm
side B length	30	mm
side B outer diameter	16	mm
side B thickness	3	mm
transition length	70	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)

1 object(s) - format STL

Tube junction ⌀100 mm to ⌀60 mm in STL format. Total length of this junction is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends feature an external fillet.

Parameter	Value	Unit
side A length	60	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	60	mm
side B outer diameter	60	mm
side B thickness	2	mm
transition length	60	mm
axis offset	0	mm
ends fillet	fillet on th...

Tube adapter STL file ⌀ 100–50 mm (Length: 160 mm) (📦 #1448)

1 object(s) - format STL

Inline tube junction ⌀100 mm to ⌀50 mm in STL 3D format. Length of this coupler is 160 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are off-center by 25.4 mm. The ends are rounded to ease the connection.

Parameter	Value	Unit
side A length	60	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	40	mm
side B outer diameter	50	mm
side B thickness	5	mm
transition length	60	mm
axis offset	25.4	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 100–50 mm (Length: 140 mm) (📦 #1449)

1 object(s) - format STL

Straight tube reducer ⌀100 mm to ⌀50 mm in STL 3D format. Length of this coupler is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm as well. The axes of the tubes are off-center by 25.4 mm. The ends have a fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	40	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	40	mm
side B outer diameter	50	mm
side B thickness	5	mm
transition length	60	mm
axis offset	25.4	mm
ends fillet	fillet on bo...

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 140 mm) (📦 #1450)

1 object(s) - format STL

Tube reducer ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.

Parameter	Value	Unit
side A length	40	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	40	mm
side B outer diameter	50	mm
side B thickness	2	mm
transition length	60	mm
axis offset	0	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)

1 object(s) - format STL

Inline fitting ⌀100 mm to ⌀50 mm in STL 3D format. Total length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	50	mm
side B thickness	2	mm
transition length	40	mm
axis offset	0	mm
ends fillet	fillet on th...

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 90 mm) (📦 #1453)

1 object(s) - format STL

Tube fitting ⌀100 mm to ⌀50 mm in STL format. Total length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 20 mm and a length of 30 mm as well. The two axes of the tubes are off-center by 25.4 mm. The ends are rounded on the inside to ease the connection.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	50	mm
side B thickness	20	mm
transition length	30	mm
axis offset	25.4	mm
ends fillet	fillet on th...

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 90 mm) (📦 #1454)

1 object(s) - format STL

Tube connector ⌀100 mm to ⌀50 mm in STL format. Total length of this fitting is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	50	mm
side B thickness	2	mm
transition length	30	mm
axis offset	0	mm
ends fillet	fillet on th...

Tube adapter STL file ⌀ 100–50 mm (Length: 90 mm) (📦 #1455)

1 object(s) - format STL

Tube adapter ⌀100 mm to ⌀50 mm in STL format. Length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 24.9 mm. The ends have a fillet on the inside to ease the connection.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	50	mm
side B thickness	2	mm
transition length	30	mm
axis offset	24.9	mm
ends fillet	fillet on th...

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 100 mm) (📦 #1470)

1 object(s) - format STL

Inline fitting ⌀100 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to make tube connection easier.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	50	mm
side B thickness	2	mm
transition length	40	mm
axis offset	0	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)

1 object(s) - format STL

Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2.5	mm
side B length	30	mm
side B outer diameter	40	mm
side B thickness	2.5	mm
transition length	20	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL 3D file ⌀ 100–53 mm (Length: 100 mm) (📦 #1600)

1 object(s) - format STL

Inline fitting ⌀100 mm to ⌀53 mm in STL 3D format. Final length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	53	mm
side B thickness	2	mm
transition length	40	mm
axis offset	0	mm
ends fillet	fillet on th...

Tube adapter STL 3D file ⌀ 100–80 mm (Length: 100 mm) (📦 #1745)

1 object(s) - format STL

Straight tube connector ⌀100 mm to ⌀80 mm in STL 3D format. Final length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The axes of the tubes are offset by 5 mm. The ends have a fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	80	mm
side B thickness	2	mm
transition length	40	mm
axis offset	5	mm
ends fillet	fillet on bo...

Tube adapter STL 3D file ⌀ 100–80 mm (Length: 63 mm) (📦 #1830)

1 object(s) - format STL

Inline tube adapter ⌀100 mm to ⌀80 mm in STL format. Total length of this junction is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Parameter	Value	Unit
side A length	25	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	25	mm
side B outer diameter	80	mm
side B thickness	4	mm
transition length	13	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL file ⌀ 100–80 mm (Length: 150 mm) (📦 #2109)

1 object(s) - format STL

Inline tube reducer ⌀100 mm to ⌀80 mm in STL format. Final length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 60 mm. The axes of the tubes are offset by 9.9 mm. The ends are rounded to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	40	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	60	mm
side B outer diameter	80	mm
side B thickness	2	mm
transition length	50	mm
axis offset	9.9	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 100–80 mm (Length: 270 mm) (📦 #2651)

1 object(s) - format STL

Straight tube fitting ⌀100 mm to ⌀80 mm in STL 3D format. Length of this sleeve is 270 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 200 mm, the smaller one of 50 mm. The ends have no fillet.

Parameter	Value	Unit
side A length	200	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	50	mm
side B outer diameter	80	mm
side B thickness	2	mm
transition length	20	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL file ⌀ 100–66 mm (Length: 95 mm) (📦 #2876)

1 object(s) - format STL

Tube fitting ⌀100 mm to ⌀66 mm in STL format. Final length of this adapter is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	35	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	35	mm
side B outer diameter	66	mm
side B thickness	2	mm
transition length	25	mm
axis offset	0	mm
ends fillet	fillet on th...

Tubing adapter STL file ⌀ 100–56 mm (Length: 75 mm) (📦 #3059)

1 object(s) - format STL

Tube adapter ⌀100 mm to ⌀56 mm in STL format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The two axes of the tubes are off-center by 20 mm. The ends are raw.

Parameter	Value	Unit
side A length	25	mm
side A outer diameter	100	mm
side A thickness	3	mm
side B length	25	mm
side B outer diameter	56	mm
side B thickness	3	mm
transition length	25	mm
axis offset	20	mm
ends fillet	no fillet

Tubing adapter STL 3D file ⌀ 100–71 mm (Length: 190 mm) (📦 #3070)

1 object(s) - format STL

Tubing reducer ⌀100 mm to ⌀71 mm in STL format. Final length of this fitting is 190 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 70 mm. The ends are not rounded.

Parameter	Value	Unit
side A length	50	mm
side A outer diameter	100	mm
side A thickness	3	mm
side B length	70	mm
side B outer diameter	71	mm
side B thickness	3	mm
transition length	70	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL 3D file ⌀ 100–20 mm (Length: 110 mm) (📦 #3343)

1 object(s) - format STL

Tube adapter ⌀100 mm to ⌀20 mm in STL format. Final length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.

Parameter	Value	Unit
side A length	10	mm
side A outer diameter	100	mm
side A thickness	3	mm
side B length	30	mm
side B outer diameter	20	mm
side B thickness	3	mm
transition length	70	mm
axis offset	0	mm
ends fillet	no fillet

Tubing adapter STL 3D file ⌀ 100–51 mm (Length: 180 mm) (📦 #3419)

1 object(s) - format STL

Straight tubing adapter ⌀100 mm to ⌀51 mm in STL format. Total length of this coupler is 180 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 80 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are offset by 25.4 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	80	mm
side A outer diameter	100	mm
side A thickness	4	mm
side B length	40	mm
side B outer diameter	51	mm
side B thickness	5	mm
transition length	60	mm
axis offset	25.4	mm
ends fillet	fillet on bo...

Tubing adapter STL file ⌀ 100–75 mm (Length: 60 mm) (📦 #3527)

1 object(s) - format STL

Straight tube connector ⌀100 mm to ⌀75 mm in STL format. Length of this adapter is 60 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Parameter	Value	Unit
side A length	20	mm
side A outer diameter	100	mm
side A thickness	5	mm
side B length	20	mm
side B outer diameter	75	mm
side B thickness	5	mm
transition length	20	mm
axis offset	0	mm
ends fillet	no fillet

Tubing adapter STL 3D file ⌀ 100–34 mm (Length: 115 mm) (📦 #3776)

1 object(s) - format STL

Straight tube connector ⌀100 mm to ⌀34 mm in STL format. Length of this adapter is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The ends have no fillet.

Parameter	Value	Unit
side A length	5	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	30	mm
side B outer diameter	34	mm
side B thickness	2	mm
transition length	80	mm
axis offset	0	mm
ends fillet	no fillet

Tubing adapter STL 3D file ⌀ 100–24 mm (Length: 105 mm) (📦 #3778)

1 object(s) - format STL

Straight tube connector ⌀100 mm to ⌀24 mm in STL 3D format. Total length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 20 mm. The ends are raw.

Parameter	Value	Unit
side A length	5	mm
side A outer diameter	100	mm
side A thickness	2	mm
side B length	20	mm
side B outer diameter	24	mm
side B thickness	2	mm
transition length	80	mm
axis offset	0	mm
ends fillet	no fillet

Tube adapter STL file ⌀ 101–83 mm (Length: 120 mm) (📦 #3110)

1 object(s) - format STL

Tubing reducer ⌀101 mm to ⌀83 mm in STL format. Final length of this connector is 120 mm. The larger-diameter tube has a thickness of 2 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 50 mm. The ends have a fillet to facilitate the connection of the two tubes.

Parameter	Value	Unit
side A length	30	mm
side A outer diameter	101	mm
side A thickness	2	mm
side B length	50	mm
side B outer diameter	83	mm
side B thickness	2.5	mm
transition length	40	mm
axis offset	0	mm
ends fillet	fillet on bo...

Tube adapter STL file ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)

1 object(s) - format STL (4.0/5) 1 vote(s)

Straight sleeve ⌀102 mm to ⌀90 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The two axes of the tubes are offset by 5.9 mm. The ends feature an external fillet to ease the connection.

Parameter	Value	Unit
side A length	20	mm
side A outer diameter	102	mm
side A thickness	2	mm
side B length	50	mm
side B outer diameter	90	mm
side B thickness	2	mm
transition length	10	mm
axis offset	5.9	mm
ends fillet	fillet on th...

1 current
2
3
…
5

Can't find the right model? Create it with your specs