Most Downloaded 3D Models

This is a 3D model of a cube in STL format. The overall dimensions are 100×100×100 mm. No fillet is applied.

Download an STL 3D model of a cube. The final dimensions are 25 by 25 by 25 mm. A fillet softens the sides.

Download an STL 3D model of a rectangular prism. The final dimensions are 100 by 100 by 20 mm. A fillet is applied to all the model's edges.

Download an STL 3D model of a rectangular prism. Its shape might look like a thin sheet. Its overall dimensions are 60 by 60 by 3 mm. A fillet smooths the sides.

Download this honeycomb protective square grid as a STL file. The overall size is 200x200 mm, with very open 10 mm cell size for peak ventilation. This type of grid serves both protection and ventilation roles.

3D design of a round grille for ventilation in STL format. Its male diameter measures 80 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D aeration grille features a thin flange of 5 mm. The overall diameter of this model is 90 mm.

3D file of a round air vent for air circulation in STL format. Its male diameter measures 90 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This ventilation grille features no flange.

Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

A 3D STL file of a cube. Its overall dimensions are 25×25×25 mm. A large fillet softens the edges.

Download this enclosure model with lid in STL format. The dimensions are 80 mm long by 50 mm wide and 35 mm high. The lid only is 15 mm high. Side thickness is 3 mm. This enclosure has significant cooling area on the lid.

Rectangular-base box with a lid offered in STL 3D format. Overall dimensions are 120 mm long, 80 mm wide, and 50 mm tall. Wall thickness is 3 mm. The box has rounded edges inside and out. Built-in clearance allows the lid to fit accurately onto the box. The internal dimensions excluding rounding are 114 mm × 74 mm × 44 mm.

Download this 3D file of a Ø16 mm custom pipe holder in STL format. The fastening is achieved by means of a countersunk screw Ø3 mm. This custom pipe clip is built for a firm hold and quick installation.

Download this 3D model of a Ø50 mm custom pipe clip in STL format. The installation is designed using a flat head screw Ø5 mm. This custom pipe holder is built for a stable hold and simple mounting.

3D model of a support bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 14 mm in width, and 12 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The reinforcing bar enhances mechanical strength and provides two clearances for fastening. Support generation is not required for printing this bracket, lying flat directly on the build plate.

Download this square grid model in STL format. The overall size is 32x32 mm, with extra fine 3 mm cell size for strong protection. This grid serves as both a protective guard and a ventilation panel.

Diameter adapter ⌀100 mm to ⌀51 mm in STL format. Total length of this reducer is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are off-center by 25.4 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Straight tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Total length of this reducer is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are rounded on the outside to ease the connection.

Download this cylindrical organizing box model in STL format. Its diameter is 100 mm and its total height is 20 mm. The wall thickness is 3 mm. A pronounced fillet located at the bottom of the box makes it easier to grab objects located inside.

Download an STL 3D model of a cube. The overall dimensions are 45 by 45 by 45 mm. No fillet is applied to the sides.

Download this 3D file of a Ø20 mm clip-on pipe mount in STL format. The mounting is achieved using a countersunk screw Ø4 mm. This pipe clip holder is intended for a stable hold and simple mounting.

3D square grid model as a STL file. The overall size is 200x200 mm, with large 6 mm cell size to enhance ventilation. This type of grid provides mechanical protection and ventilation.

Download a 3D model of a rectangular prism in STL format. Its shape might resemble a slab. Its overall dimensions are 100 by 5 by 100 mm. No fillet is applied to the sides.

Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to make tube connection easier.

This printable mono-compartment box features a single cavity measuring 50×50×60mm. External size are 58×58×64mm. The fillet of 3mm helps with item retrieval inside the compartment. The separators are particularly reinforced.

3D model of a storage organizer in STL format. This model contains 25 compartments, arranged in 5 rows and 5 columns. In detail, this means 5 rows of 5 compartments. Each compartment has usable dimensions of 40 mm wide, 30 mm high, and 50 mm deep. The wall thickness is 2 mm. The compartments include 2 dividers each, which allows up to 3 sections per compartment and up to 75 compartments in total. The global dimensions of the box are 234.5 x 174.5 x 56 mm. All the objects in this model were designed to be printed without support.

Download a cube as a 3D STL file. The final dimensions are 30 by 30 by 30 mm. A large fillet softens the corners.

Download an STL 3D model of a box. Its shape might resemble a panel. Its overall dimensions are 100×87×12 mm. A fillet smooths the sides.

This is a 3D model of a cube in STL format. Its final dimensions are 100 by 100 by 100 mm. A fillet smooths the edges.

Download this 3D file of a Ø40 mm pipe support clip in STL format. The mounting is designed with a round head screw Ø5 mm. This clip-on pipe holder is intended for a secure hold and quick installation.

Model of an angle bracket with a central reinforcing bar in STL 3D format. The dimensions are 110 mm in length, 110 mm in height, 50 mm in width, and 8 mm in thickness. The holes are designed with a diameter of 6 mm. Chamfers are done to the holes for a cleaner fit of the screws. The central reinforcement bar reduces bending and includes two openings for screwdriver access. No support is needed to print this bracket, printed flat directly on the build plate.

Model of a round vent cover for air circulation in STL format. Its male diameter is 93.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D ventilation grille features a thin flange of 5 mm. The overall diameter of the model is 103.6 mm.

Straight tube adapter ⌀16 mm to ⌀12 mm in STL 3D format. Length of this junction is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are rounded to make tube connection easier.

Download this STL 3D file of a basic U-shaped handle. The external dimensions are 20×40×8 mm. This handle has a square cross-section and a smooth transition. A light fillet along the edges allows for a better tactile feel. The openings are 4 mm diameter with a center-to-center distance of 32 mm.

A 3D STL file of a rectangular prism. The shape might resemble a thin sheet. Its final dimensions are 100×90×10 mm. This model has no fillet on the sides.

Tube offered as a STL 3D file. The tube has dimensions of 100 mm in length, an outer diameter of 24 mm and an inner diameter of 20 mm. The tube features a wall thickness of 2 mm.

Download this 3D model of a Ø10 mm clip-on pipe mount in STL format. The fastening is done by means of a flat head screw Ø3 mm. This pipe support clip is intended for a secure hold with easy setup.

3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.

3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2  mm. External diameter (OD) is 24 mm.

Download this enclosure model with screwed lid in STL format. The dimensions are 80 mm long by 80 mm wide and 40 mm high. The cover only is 10 mm high. Wall thickness is 3 mm. This enclosure has significant cooling area on the lid.

Storage cube box with a lid provided as a STL 3D file. Box size: 50 mm × 50 mm × 50 mm (L × W × H). The wall thickness is a slim 2 mm. Interior and exterior edges are rounded. A small clearance is included to ensure a precise fit between the box and the lid. The inner dimensions excluding rounding are 46 mm × 46 mm × 46 mm.

3D model of a Ø25 mm pipe clip mount in STL format. The fastening is performed by means of a flat head screw Ø3 mm. This pipe support clip is intended for a secure hold and quick installation.

Download this 3D honeycomb square grid model in STL format. Mounting holes are placed at the four corners (center-to-center 80x80 mm), each with a diameter of Ø5 mm. The overall dimensions reach 90x90 mm, with regular 5 mm cell size for versatile use. This grid provides both mechanical protection and airflow.

Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 75 mm. The tube thickness is therefore 2.5 mm. The ends feature fillets to make it easier to assemble.

3D model of an elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 8.5 mm and an internal diameter of 6 mm. The tube thickness is therefore 1.25 mm.

Design of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This aeration grille has a flange of 10 mm. The total diameter of the model is 170 mm.

Straight tube reducer ⌀32 mm to ⌀25 mm in STL 3D format. Length of this junction is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Download this 3D model of a rectangular prism as an STL file. Its final dimensions are 10×10×90 mm. A fillet smooths the edges.

Download this file of a support bracket with a central reinforcing bar in STL format. The dimensions are 100 mm in length, 100 mm in height, 14 mm in width, and 6 mm in thickness. The screw holes have a diameter of 6 mm. Chamfers are applied to the holes to improve the seating of the heads. The central reinforcement bar reduces bending and provides two passages for fastening. Support generation is not required for printing this bracket, printed flat directly on the build plate.

This parametric sectioned box provides 3 compartments measuring 45×45×45mm each. The total dimensions are 151×53×49mm. Fillets of 3mm applied to all compartments help with item retrieval stored in the compartments. The separators are particularly solid.

Download a rectangular prism as a 3D STL file. Its final dimensions are 83×83×50 mm. A fillet softens the sides.

Download this 3D model of a Ø20 mm custom pipe holder in STL format. The mounting is done using a countersunk screw Ø3 mm. This snap-on pipe mount is built for a firm hold and quick installation.

Download this 3D honeycomb protective rectangular grid as a STL file. Mounting holes are placed at the four corners (center-to-center 230x30 mm), each with a diameter of Ø5 mm. The overall dimensions reach 240x40 mm, with wide 8 mm cell size to enhance ventilation. This type of grid provides mechanical protection and ventilation.

3D file of a mounting bracket with a reinforcing bar in STL 3D format. The dimensions are 200 mm in length, 200 mm in height, 50 mm in width, and 5 mm in thickness. The drill holes are designed with a diameter of 6 mm. Chamfers are applied to the holes to seat the screw heads. The central reinforcement bar reduces bending and includes two passages for fastening. This bracket prints without support, printed flat on the build plate.

STL 3D file for a rectangular box with a lid. The box measures 135 mm in length, 132 mm in width, and 50 mm in height. The walls are 3 mm thick. The box has rounded edges inside and out. Built-in clearance allows the lid to fit accurately onto the box. The internal dimensions excluding rounding are 129 mm × 126 mm × 44 mm.

Download this 3D model of a Ø36 mm custom pipe clip in STL format. The fastening is performed using a countersunk screw Ø4 mm. This clip-on pipe holder is intended for a firm hold with easy setup.

Download this 3D file of an angle bracket with a central reinforcement in STL 3D format. The dimensions are 120 mm in length, 120 mm in height, 20 mm in width, and 8 mm in thickness. The mounting holes are designed with a diameter of 5 mm. The reinforcing bar enhances mechanical strength and provides two passages for screwdriver access. Support generation is not required for printing this bracket, printed flat directly on the build plate.

3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 18 mm and an internal diameter of 16 mm. This results in a tube thickness of 1 mm.

Download this enclosure with screwed lid in STL format. The dimensions are 120 mm long by 100 mm wide and 45 mm high. The cover is 15 mm high. Side thickness is 4 mm. This enclosure features strong cooling area on the lid.

Straight sleeve ⌀60 mm to ⌀30 mm in STL 3D format. Final length of this adapter is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The two axes of the tubes are off-center by 13.9 mm. The ends have no fillet.

Download this 3D model of a box as an STL file. The final dimensions are 80×82×30 mm. A small fillet softens all the sides.