Washer, Flat gasket, Ring
Number of 3D models generated: 23
Category: technical parts
Loading...
(model #1695)
Photos of various 3D printed models
This template allows the generation of custom flat gaskets and washers.
A precision of 0.1 mm is available for each parameter: inner diameter, outer diameter, and thickness. It is also possible to add a chamfer or a fillet on the inner and/or outer diameter, on one or both faces.
The choice of chamfer or fillet helps to smooth the edges and/or improve mechanical strength.
Customizable dimensions make this generator suitable for both prototypes and functional parts.
These flat gasket or washer models can be printed in flexible/soft material or not.
Keywords: gasket, flat gasket, washer, sealing gasket, bushing, disc, ring
Search
If the model doesn't exist, on-demand generation will be offered.
Please fill in at least one field.
Illustration of the parameters
Latest models generated using this template
Washer / Flat Gasket ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 0.8 mm (📦 #1763)
1 object(s) - format STL
3D model of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀38.6 mm and an outer diameter of ⌀42.8 mm. The part thickness is 0.8 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.6 | mm |
| outer diameter | 42.8 | mm |
| thickness | 0.8 | mm |
| finish | 0 | |
| finish position | 0 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 38.7 mm ⌀OD: 42.8 mm thickness: 1 mm (📦 #1762)
1 object(s) - format STL
File of gasket / washer in STL file format. This model has an internal diameter of ⌀38.7 mm and an external diameter of ⌀42.8 mm. The part thickness is 1 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.7 | mm |
| outer diameter | 42.8 | mm |
| thickness | 1 | mm |
| finish | 0 | |
| finish position | 0 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 2 mm (📦 #1761)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀38.6 mm and an outer diameter of ⌀42.8 mm. The part thickness is 2 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 38.6 | mm |
| outer diameter | 42.8 | mm |
| thickness | 2 | mm |
| finish | 0 | |
| finish position | 0 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 0.1 mm (📦 #1742)
1 object(s) - format STL
Model of flat gasket / washer in STL 3D file format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 0.1 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 60.1 | mm |
| thickness | 0.1 | mm |
| finish | 0 | |
| finish position | 1 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 10 mm (📦 #1741)
1 object(s) - format STL
File of gasket / washer in STL format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 10 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 60.1 | mm |
| thickness | 10 | mm |
| finish | 0 | |
| finish position | 1 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 18 mm ⌀OD: 22 mm thickness: 0.4 mm + fillets (📦 #1738)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀18 mm and an outer diameter of ⌀22 mm. The part thickness is 0.4 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 22 | mm |
| thickness | 0.4 | mm |
| finish | 2 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 0.1 | mm |
Washer / Flat Gasket ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)
1 object(s) - format STL
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 70 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 0 | |
| finish value | 3.9 | mm |
Washer / Flat Gasket ⌀ID: 100 mm ⌀OD: 120 mm thickness: 15 mm + chamfer (📦 #1716)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of gasket / washer in STL format. This model features an inner diameter of ⌀100 mm and an outer diameter of ⌀120 mm. The part thickness is 15 mm. A chamfer is applied on the inner diameter with a value of 9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 120 | mm |
| thickness | 15 | mm |
| finish | 1 | |
| finish position | 0 | |
| sides | 0 | |
| finish value | 9 | mm |
Washer / Flat Gasket ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm (📦 #1715)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀100 mm and an external diameter of ⌀112 mm. The part thickness is 16 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 112 | mm |
| thickness | 16 | mm |
| finish | 0 | |
| finish position | 0 | |
| sides | 1 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 18 mm ⌀OD: 20 mm thickness: 1.2 mm (📦 #1714)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This part has an inner diameter of ⌀18 mm and an outer diameter of ⌀20 mm. The thickness is 1.2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 20 | mm |
| thickness | 1.2 | mm |
| finish | 0 | |
| finish position | 0 | |
| sides | 0 | |
| finish value | 0 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 100 mm thickness: 20 mm + fillet (📦 #1713)
1 object(s) - format STL
Download this 3D model of gasket / washer in STL 3D file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀100 mm. The part thickness is 20 mm. A fillet is present on the external diameter with a value of 19.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 100 | mm |
| thickness | 20 | mm |
| finish | 2 | |
| finish position | 1 | |
| sides | 0 | |
| finish value | 19.9 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers (📦 #1712)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 10 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 4.9 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets (📦 #1711)
1 object(s) - format STL
3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The part thickness is 10 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 10 | mm |
| finish | 2 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 4.9 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)
1 object(s) - format STL
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | 2 | |
| finish position | 2 | |
| sides | 0 | |
| finish value | 4 | mm |
Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)
1 object(s) - format STL
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | 2 | |
| finish position | 1 | |
| sides | 0 | |
| finish value | 2 | mm |
Washer / Flat Gasket ⌀ID: 18 mm ⌀OD: 24 mm thickness: 10 mm + chamfers (📦 #1704)
1 object(s) - format STL
3D model of washer / gasket in STL format. This model has an internal diameter of ⌀18 mm and an external diameter of ⌀24 mm. The total thickness is 10 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 24 | mm |
| thickness | 10 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 0.3 | mm |
Washer / Flat Gasket ⌀ID: 26 mm ⌀OD: 40 mm thickness: 16 mm + chamfers (📦 #1702)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 16 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 16 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 1.5 | mm |
Washer / Flat Gasket ⌀ID: 26 mm ⌀OD: 40 mm thickness: 12 mm + chamfers (📦 #1701)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 12 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 12 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 1.5 | mm |
Washer / Flat Gasket ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1700)
1 object(s) - format STL (5.0/5) 2 vote(s)
File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 1.5 | mm |
Washer / Flat Gasket ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 6 | mm |
| finish | 1 | |
| finish position | 1 | |
| sides | 1 | |
| finish value | 1.5 | mm |
Washer / Flat Gasket ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)
1 object(s) - format STL
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | 1 | |
| finish position | 1 | |
| sides | 1 | |
| finish value | 1.5 | mm |
Washer / Flat Gasket ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | 2 | |
| finish position | 1 | |
| sides | 0 | |
| finish value | 1 | mm |
Washer / Flat Gasket ⌀ID: 16 mm ⌀OD: 24 mm thickness: 3 mm + chamfers (📦 #1695)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 3 | mm |
| finish | 1 | |
| finish position | 2 | |
| sides | 1 | |
| finish value | 0.5 | mm |