Washer / Flat Gasket STL 3D file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm 📦#1715
Generation date: 2025-09-11
3D model download
Free- washer-flat-gasket-ring-inD100_model1715-nb0_dd{id}.stl : 98.5 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Photos of the model once printed
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 100 mm |
| #2 | outer diameter | 112 mm |
| #3 | thickness | 16 mm |
| #4 | finish | none |
| #5 | finish position | - |
| #6 | sides | - |
| #7 | finish value | - |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 120 mm thickness: 15 mm (📦 #2355)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL 3D file format. This model has an internal diameter of ⌀90 mm and an external diameter of ⌀120 mm. The thickness is 15 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 120 | mm |
| thickness | 15 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 12.5 mm + chamfer (📦 #1812)
1 object(s) - format STL
Download this model of washer / flat gasket in STL 3D file format. This part has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 12.5 mm. A chamfer is applied on the internal diameter with a value of 0.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 12.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 10 mm (📦 #1741)
1 object(s) - format STL
File of gasket / washer in STL format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 10 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 60.1 | mm |
| thickness | 10 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 20.8 mm ⌀OD: 50 mm thickness: 12 mm (📦 #2379)
1 object(s) - format STL
Model of flat gasket / washer in STL file format. This part features an internal diameter of ⌀20.8 mm and an external diameter of ⌀50 mm. The thickness is 12 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20.8 | mm |
| outer diameter | 50 | mm |
| thickness | 12 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm (📦 #1816)
1 object(s) - format STL
Download this file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀57 mm and an outer diameter of ⌀71 mm. The total thickness is 5 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 90 mm ⌀OD: 150 mm thickness: 15 mm + chamfers (📦 #2356)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀90 mm and an outer diameter of ⌀150 mm. The total thickness is 15 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 150 | mm |
| thickness | 15 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm + fillet (📦 #3012)
1 object(s) - format STL
File of washer / gasket in STL file format. This part features an internal diameter of ⌀100 mm and an external diameter of ⌀112 mm. The part thickness is 16 mm. A fillet is applied on the internal diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 112 | mm |
| thickness | 16 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers (📦 #1712)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 4.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 16 mm + chamfers (📦 #1702)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 16 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 16 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 110 mm ⌀OD: 120 mm thickness: 2 mm (📦 #2357)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This part features an internal diameter of ⌀110 mm and an external diameter of ⌀120 mm. The total thickness is 2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 110 | mm |
| outer diameter | 120 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 48 mm thickness: 6 mm (📦 #1831)
1 object(s) - format STL
Download this 3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀32 mm and an outer diameter of ⌀48 mm. The total thickness is 6 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 32 | mm |
| outer diameter | 48 | mm |
| thickness | 6 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 12 mm + chamfers (📦 #1701)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 12 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 12 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 55 mm thickness: 5 mm (📦 #3026)
1 object(s) - format STL
3D file of gasket / washer in STL format. This part has an internal diameter of ⌀30 mm and an external diameter of ⌀55 mm. The part thickness is 5 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 118 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)
1 object(s) - format STL
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 70 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 140 mm ⌀OD: 143 mm thickness: 1.5 mm (📦 #2870)
1 object(s) - format STL
File of gasket / washer in STL file format. This part has an internal diameter of ⌀140 mm and an external diameter of ⌀143 mm. The thickness is 1.5 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 140 | mm |
| outer diameter | 143 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #2284)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.9 | mm |