?>

Tube adapter STL file ⌀ 25–20 mm (Length: 45 mm) 📦#1101

STL Download STL
Create a new model:
from scratch search for a model
Tube fitting ⌀25 mm to ⌀20 mm in STL 3D format. Length of this reducer is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Generation date: 2025-06-18
3D Model Tube adapter STL file ⌀ 25–20 mm (Length: 45 mm)

3D model download

Free
  • inline-tube-adapter-lenA15mm-d_model1101-nb0_dd{id}.stl : 1 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 15 mm
#2 side A outer diameter 25 mm
#3 side A thickness 3 mm
#4 side B length 15 mm
#5 side B outer diameter 20 mm
#6 side B thickness 3 mm
#7 transition length 15 mm
#8 axis offset 0 mm
#9 ends fillet fillet on the inside
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Straight tube connector ⌀38 mm to ⌀19 mm in STL format. Final length of this fitting is 50 mm. The larger-diameter tube has a thickness of 2.9 mm and a sleeve length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends have a fillet on the inside to ease the connection.
Parameter Value Unit
side A length 15 mm
side A outer diameter 38 mm
side A thickness 2.9 mm
side B length 20 mm
side B outer diameter 19 mm
side B thickness 2 mm
transition length 15 mm
axis offset 0 mm
ends fillet fillet on th...
Inline tube reducer ⌀32 mm to ⌀15 mm in STL format. Length of this adapter is 50 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 32 mm
side A thickness 3.5 mm
side B length 20 mm
side B outer diameter 15 mm
side B thickness 3.5 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...
Inline tube reducer ⌀35 mm to ⌀29 mm in STL 3D format. Final length of this junction is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 35 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 29 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet fillet on bo...
Inline tube junction ⌀35 mm to ⌀30 mm in STL format. Total length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 35 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet fillet on bo...
Tube coupler ⌀32 mm to ⌀15 mm in STL format. Length of this junction is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 32 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 15 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...
Inline tube adapter ⌀50 mm to ⌀6 mm in STL 3D format. Length of this fitting is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 10 mm
side A outer diameter 50 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 6 mm
side B thickness 2 mm
transition length 15 mm
axis offset 0 mm
ends fillet fillet on th...
Tube reducer ⌀51 mm to ⌀35 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 51 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on bo...
Straight sleeve ⌀45 mm to ⌀25 mm in STL 3D format. Length of this coupler is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends feature an external fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 45 mm
side A thickness 4 mm
side B length 20 mm
side B outer diameter 25 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on th...
Straight tube adapter ⌀16 mm to ⌀12 mm in STL 3D format. Length of this junction is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are rounded to make tube connection easier.
Parameter Value Unit
side A length 15 mm
side A outer diameter 16 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 12 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on bo...
Straight tube fitting ⌀16 mm to ⌀12 mm in STL 3D format. Final length of this adapter is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends have a fillet to ease the connection.
Parameter Value Unit
side A length 10 mm
side A outer diameter 16 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 12 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on bo...
Straight tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Total length of this reducer is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length 20 mm
side A outer diameter 50 mm
side A thickness 4 mm
side B length 20 mm
side B outer diameter 40 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on th...
Straight tube reducer ⌀38 mm to ⌀10 mm in STL 3D format. Total length of this coupler is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 30 mm
side A outer diameter 38 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...
Straight tube connector ⌀35 mm to ⌀20 mm in STL format. Final length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends feature a fillet to make tube connection easier.
Parameter Value Unit
side A length 25 mm
side A outer diameter 35 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 20 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on bo...
Inline tube reducer ⌀35 mm to ⌀19 mm in STL format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet to ease the connection.
Parameter Value Unit
side A length 25 mm
side A outer diameter 35 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 19 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on bo...
Tube reducer ⌀35 mm to ⌀23 mm in STL format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 35 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 23 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on bo...
Tube junction ⌀50 mm to ⌀40 mm in STL 3D format. Length of this coupler is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 50 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 40 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on bo...
Straight tube fitting ⌀76 mm to ⌀50 mm in STL 3D format. Length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 76 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...
Tube reducer ⌀35 mm to ⌀34 mm in STL 3D format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 35 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 34 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on bo...
Inline tube coupler ⌀30 mm to ⌀17 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded to make tube connection easier.
Parameter Value Unit
side A length 30 mm
side A outer diameter 30 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 17 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on bo...
Tube fitting ⌀20 mm to ⌀5 mm in STL 3D format. Length of this reducer is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 20 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 5 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on th...
Inline sleeve ⌀78 mm to ⌀50 mm in STL format. Length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to ease the connection.
Parameter Value Unit
side A length 20 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...
Inline tube junction ⌀60 mm to ⌀20 mm in STL format. Total length of this connector is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends feature a fillet to ease the connection.
Parameter Value Unit
side A length 30 mm
side A outer diameter 60 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 20 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on bo...
Inline tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...
Straight sleeve ⌀82 mm to ⌀63 mm in STL format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the inside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 82 mm
side A thickness 3 mm
side B length 25 mm
side B outer diameter 63 mm
side B thickness 3 mm
transition length 25 mm
axis offset 0 mm
ends fillet fillet on th...
Inline tube coupler ⌀80 mm to ⌀35 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends have a fillet to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on bo...
Inline tube adapter ⌀60 mm to ⌀40 mm in STL 3D format. Final length of this coupler is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 1 mm. The ends feature an external fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 40 mm
side B thickness 3 mm
transition length 5 mm
axis offset 1 mm
ends fillet fillet on th...