Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) 📦#1163
Generation date: 2025-07-09
3D model download
Free- inline-tube-adapter-lenA30mm-d_model1163-nb0_dd{id}.stl : 2.6 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Photos of the model once printed
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 30 mm |
| #2 | side A outer diameter | 80 mm |
| #3 | side A thickness | 3 mm |
| #4 | side B length | 30 mm |
| #5 | side B outer diameter | 50 mm |
| #6 | side B thickness | 3 mm |
| #7 | transition length | 20 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | no fillet |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 76 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm) (📦 #1234)
1 object(s) - format STL
Diameter adapter ⌀60 mm to ⌀45 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm) (📦 #1920)
1 object(s) - format STL
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 46 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 85–60 mm (Length: 45 mm) (📦 #1165)
1 object(s) - format STL
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)
1 object(s) - format STL
Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 3 | mm |
| transition length | 21 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 60–48 mm (Length: 45 mm) (📦 #1973)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀48 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 48 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 64–49 mm (Length: 65 mm) (📦 #1230)
1 object(s) - format STL
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–40 mm (Length: 65 mm) (📦 #1942)
1 object(s) - format STL
Tube adapter ⌀45 mm to ⌀40 mm in STL format. Total length of this coupler is 65 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2.5 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 68–52 mm (Length: 65 mm) (📦 #1231)
1 object(s) - format STL
Straight tube fitting ⌀68 mm to ⌀52 mm in STL 3D format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 68–53 mm (Length: 65 mm) (📦 #1232)
1 object(s) - format STL
Straight tube coupler ⌀68 mm to ⌀53 mm in STL 3D format. Final length of this fitting is 65 mm. The larger-diameter tube has a thickness of 2 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 68–53 mm (Length: 65 mm) (📦 #1233)
1 object(s) - format STL
Straight sleeve ⌀68 mm to ⌀53 mm in STL 3D format. Total length of this sleeve is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 64–49 mm (Length: 63 mm) (📦 #1229)
1 object(s) - format STL
Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 55–50 mm (Length: 75 mm) (📦 #2339)
1 object(s) - format STL
Straight tube coupler ⌀55 mm to ⌀50 mm in STL 3D format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 55 | mm |
| side A thickness | 2.5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 54–45 mm (Length: 75 mm) (📦 #2338)
1 object(s) - format STL
Tube fitting ⌀54 mm to ⌀45 mm in STL format. Total length of this reducer is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 54 | mm |
| side A thickness | 2.5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 2.5 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 52–45 mm (Length: 75 mm) (📦 #2154)
1 object(s) - format STL
Inline fitting ⌀52 mm to ⌀45 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 52 | mm |
| side A thickness | 2.5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 2.5 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm) (📦 #1882)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)
1 object(s) - format STL (5.0/5) 1 vote(s)
Straight tube connector ⌀80 mm to ⌀70 mm in STL 3D format. Total length of this adapter is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm) (📦 #2254)
1 object(s) - format STL
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 70 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 62 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2.5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀40 mm in STL 3D format. Final length of this coupler is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 1 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 1 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 66–40 mm (Length: 75 mm) (📦 #2359)
1 object(s) - format STL
Diameter adapter ⌀66 mm to ⌀40 mm in STL format. Total length of this coupler is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 66 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)
1 object(s) - format STL
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 88–25 mm (Length: 63 mm) (📦 #1823)
1 object(s) - format STL
Tube coupler ⌀88 mm to ⌀25 mm in STL format. Total length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 88 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)
1 object(s) - format STL
Straight tube fitting ⌀60 mm to ⌀45 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |