Tube adapter ⌀ 60–45 mm (Length: 75 mm) 📦#1234
Generation date: 2025-07-20
3D model download
Free- inline-tube-adapter-lenA30mm-d_model1234-nb0_dd{id}.stl : 2.7 Mo
STL
Mesh quality :
not defined
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 30 mm |
| #2 | side A outer diameter | 60 mm |
| #3 | side A thickness | 3 mm |
| #4 | side B length | 30 mm |
| #5 | side B outer diameter | 45 mm |
| #6 | side B thickness | 3 mm |
| #7 | transition length | 15 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | no fillet |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Tube adapter ⌀76 mm to ⌀50 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 76 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)
1 object(s) - format STL
Inline sleeve ⌀80 mm to ⌀30 mm in STL format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀50 mm in STL format. Total length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–60 mm (Length: 45 mm) (📦 #1165)
1 object(s) - format STL
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Total length of this adapter is 45 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 64–49 mm (Length: 65 mm) (📦 #1230)
1 object(s) - format STL
Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Final length of this coupler is 65 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Diameter adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)
1 object(s) - format STL
Tube connector ⌀100 mm to ⌀40 mm in STL format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)
1 object(s) - format STL
Inline tube junction ⌀85 mm to ⌀65 mm in STL format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 3 | mm |
| transition length | 21 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 64–49 mm (Length: 63 mm) (📦 #1229)
1 object(s) - format STL
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Final length of this fitting is 63 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)
1 object(s) - format STL
Straight sleeve ⌀60 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 1 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 68–52 mm (Length: 65 mm) (📦 #1231)
1 object(s) - format STL
Tube adapter ⌀68 mm to ⌀52 mm in STL format. Length of this coupler is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 68–53 mm (Length: 65 mm) (📦 #1233)
1 object(s) - format STL
Inline tube adapter ⌀68 mm to ⌀53 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 68–53 mm (Length: 65 mm) (📦 #1232)
1 object(s) - format STL
Tube reducer ⌀68 mm to ⌀53 mm in STL format. Total length of this adapter is 65 mm. The thickness of the larger diameter tube is 2 mm, and the smaller one is 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Diameter adapter ⌀85 mm to ⌀70 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are off-center. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 33–26 mm (Length: 50 mm) (📦 #1526)
1 object(s) - format STL
Straight tube adapter ⌀33 mm to ⌀26 mm in STL format. Final length of this junction is 50 mm. The thickness of the larger diameter tube is 2.8 mm, and the smaller one is 2 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 33 | mm |
| side A thickness | 2.8 | mm |
| side B length | 20 | mm |
| side B outer diameter | 26 | mm |
| side B thickness | 2 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)
1 object(s) - format STL
Tube connector ⌀44 mm to ⌀16 mm in STL format. Length of this connector is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 45–15 mm (Length: 90 mm) (📦 #1272)
1 object(s) - format STL
Inline sleeve ⌀45 mm to ⌀15 mm in STL format. Length of this junction is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 33–10 mm (Length: 95 mm) (📦 #1522)
1 object(s) - format STL
Inline tube junction ⌀33 mm to ⌀10 mm in STL format. Total length of this connector is 95 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 33 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 33–18 mm (Length: 50 mm) (📦 #1525)
1 object(s) - format STL
Tube reducer ⌀33 mm to ⌀18 mm in STL format. Total length of this fitting is 50 mm. The thickness of the larger diameter tube is 2.9 mm, and the smaller one is 2 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 33 | mm |
| side A thickness | 2.9 | mm |
| side B length | 20 | mm |
| side B outer diameter | 18 | mm |
| side B thickness | 2 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)
1 object(s) - format STL
Straight tube coupler ⌀60 mm to ⌀45 mm in STL format. Total length of this connector is 100 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Diameter adapter ⌀81 mm to ⌀55 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 88–25 mm (Length: 63 mm) (📦 #1823)
1 object(s) - format STL
Tube fitting ⌀88 mm to ⌀25 mm in STL format. Total length of this fitting is 63 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 88 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 45–10 mm (Length: 90 mm) (📦 #1260)
1 object(s) - format STL (4.0/5) 1 vote(s)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Final length of this junction is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 45–10 mm (Length: 97 mm) (📦 #1443)
1 object(s) - format STL
Straight tube coupler ⌀45 mm to ⌀10 mm in STL format. Length of this junction is 97 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 37 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 45–9 mm (Length: 90 mm) (📦 #1271)
1 object(s) - format STL
Tube reducer ⌀45 mm to ⌀9 mm in STL format. Final length of this coupler is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 56–50 mm (Length: 120 mm) (📦 #1493)
1 object(s) - format STL (5.0/5) 1 vote(s)
Straight sleeve ⌀56 mm to ⌀50 mm in STL format. Final length of this reducer is 120 mm. The thickness of the tubes is identical: 2 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 56 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 50–40 mm (Length: 45 mm ) (📦 #1094)
1 object(s) - format STL (5.0/5) 3 vote(s)
Inline tube junction ⌀50 to ⌀40 mm in STL format. Length of this connector is 45 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |