Custom Pipe clip holder Ø50 mm STL file · Countersunk screw Ø5 mm 📦#3203
Generation date: 2025-11-11
3D model download
Free- pipe-clip-holder-dia50mm-hod5m_model3203-nb0_dd{id}.stl : 164.1 Ko
STL
Mesh quality :
0.001
0.1
No compliance warranty
License: CC BY-NC-ND - Creative commons
(attribution - non commercial use - no derivatives)
Safe download
Photos of the model once printed
Values for this model
This model was generated by the Pipe clip holder template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | tube diameter | 50 mm (≃1.97 in) |
| #2 | hole diameter | 5 mm (≃3/16 in) |
| #3 | countersunk screw | yes |
| Metadata | Value |
|---|---|
| width | 14.1 mm (≃9/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 tube diameter | dia |
| #2 hole diameter | hod |
| #3 countersunk screw | scrT |
Related 3D models
To search for a model based on your own parameters, go to the template page Pipe clip holder
Clip-on tube holder Ø48 mm STL file · Countersunk screw Ø5 mm (📦 #5439)
1 object(s) - format STL
Download this 3D model of a Ø48 mm clip-on pipe mount in STL format. The mounting is performed using a countersunk screw Ø5 mm. This custom pipe holder is intended for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 48 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø53 mm STL file · Flat head screw Ø5 mm (📦 #6572)
1 object(s) - format STL
Download this 3D file of a Ø53 mm clip-on pipe holder in STL format. The mounting is performed by means of a flat head screw Ø5 mm. This snap-on tube holder is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 53 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø44 mm STL 3D file · Flat head screw Ø5 mm (📦 #5732)
1 object(s) - format STL
3D model of a Ø44 mm custom pipe holder in STL format. The mounting is done with a countersunk screw Ø5 mm. This custom pipe clip is designed for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 44 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø43 mm STL file · Flat head screw Ø5 mm (📦 #6210)
1 object(s) - format STL
Download this 3D file of a Ø43 mm clip-on pipe mount in STL format. The mounting is done using a flat head screw Ø5 mm. This custom pipe holder is built for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 43 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø42 mm STL 3D file · Flat head screw Ø5 mm (📦 #4885)
1 object(s) - format STL
3D model of a Ø42 mm pipe clip mount in STL format. The fastening is achieved by means of a flat head screw Ø5 mm. This custom pipe holder is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 42 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø59 mm STL 3D file · Countersunk screw Ø5 mm (📦 #4665)
1 object(s) - format STL
Download this 3D model of a Ø59 mm clip-on pipe holder in STL format. The installation is performed using a countersunk screw Ø5 mm. This pipe clip mount is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 59 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø40 mm STL 3D file · Flat head screw Ø5 mm (📦 #7066)
1 object(s) - format STL
3D model of a Ø40 mm pipe clip in STL format. The installation is done by means of a countersunk screw Ø5 mm. This clip-on pipe mount is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 40 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø60 mm STL file · Flat head screw Ø5 mm (📦 #4160)
1 object(s) - format STL
Download this 3D model of a Ø60 mm snap-on pipe clip in STL format. The fastening is performed with a countersunk screw Ø5 mm. This custom pipe clip is intended for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on tube support Ø65 mm STL 3D file · Flat head screw Ø5 mm (📦 #5261)
1 object(s) - format STL
Download this 3D file of a Ø65 mm pipe support clip in STL format. The mounting is done by means of a flat head screw Ø5 mm. This clip-on tube holder is built for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 65 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip holder Ø67 mm STL file · Countersunk screw Ø5 mm (📦 #6571)
1 object(s) - format STL
3D model of a Ø67 mm pipe support clip in STL format. The mounting is achieved with a flat head screw Ø5 mm. This clip-on tube holder is designed for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 67 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe holder Ø68 mm STL file · Countersunk screw Ø5 mm (📦 #5260)
1 object(s) - format STL
Download this 3D model of a Ø68 mm custom pipe clip in STL format. The installation is achieved with a flat head screw Ø5 mm. This pipe support clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 68 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Tube clip Ø75 mm STL 3D file · Flat head screw Ø5 mm (📦 #3536)
1 object(s) - format STL
Download this 3D model of a Ø75 mm clip-on pipe support in STL format. The installation is achieved using a countersunk screw Ø5 mm. This snap-on pipe clip is built for a firm hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 75 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø76 mm STL 3D file · Countersunk screw Ø5 mm (📦 #4662)
1 object(s) - format STL
Download this 3D file of a Ø76 mm custom pipe clip in STL format. The fastening is performed with a flat head screw Ø5 mm. This snap-on pipe mount is intended for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 76 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe clip Ø80 mm STL 3D file · Flat head screw Ø5 mm (📦 #3309)
1 object(s) - format STL
3D model of a Ø80 mm pipe clip holder in STL format. The fastening is achieved by means of a countersunk screw Ø5 mm. This pipe clip is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 80 | mm |
| hole diameter | 5 | mm |
| countersunk screw | yes |
Pipe support clip Ø50 mm STL 3D file · Countersunk screw Ø4 mm (📦 #4723)
1 object(s) - format STL
Download this 3D model of a Ø50 mm snap-on pipe clip in STL format. The mounting is designed by means of a flat head screw Ø4 mm. This clip-on pipe support is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 50 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip holder Ø51 mm STL 3D file · Flat head screw Ø4 mm (📦 #6476)
1 object(s) - format STL
Download this 3D file of a Ø51 mm snap-on pipe mount in STL format. The fastening is performed using a flat head screw Ø4 mm. This pipe clip is designed for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 51 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on tube support Ø52 mm STL 3D file · Countersunk screw Ø4 mm (📦 #5604)
1 object(s) - format STL
3D model of a Ø52 mm snap-on pipe mount in STL format. The mounting is performed using a flat head screw Ø4 mm. This clip-on pipe support is designed for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 52 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe clip Ø45 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3521)
1 object(s) - format STL
3D model of a Ø45 mm clip-on pipe support in STL format. The fastening is performed using a countersunk screw Ø4 mm. This pipe clip mount is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 45 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip Ø55 mm STL file · Countersunk screw Ø4 mm (📦 #7085)
1 object(s) - format STL
Download this 3D file of a Ø55 mm pipe clip mount in STL format. The fastening is achieved with a countersunk screw Ø4 mm. This pipe clip is designed for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 55 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe clip holder Ø43 mm STL file · Flat head screw Ø4 mm (📦 #7422)
1 object(s) - format STL
3D model of a Ø43 mm custom pipe clip in STL format. The fastening is performed with a countersunk screw Ø4 mm. This pipe clip holder is built for a secure hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 43 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube support clip Ø60 mm STL 3D file · Countersunk screw Ø6 mm (📦 #3632)
1 object(s) - format STL
3D model of a Ø60 mm custom pipe clip in STL format. The mounting is done by means of a heavy-duty flat head screw Ø6 mm. This snap-on pipe clip is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 6 | mm |
| countersunk screw | yes |
Clip-on tube holder Ø40 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3518)
1 object(s) - format STL
Download this 3D model of a Ø40 mm clip-on tube holder in STL format. The installation is performed with a countersunk screw Ø4 mm. This clip-on pipe support is intended for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 40 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube support clip Ø60 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3581)
1 object(s) - format STL
Download this 3D model of a Ø60 mm snap-on pipe mount in STL format. The mounting is done by means of a countersunk screw Ø4 mm. This pipe clip mount is intended for a secure hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 60 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip holder Ø38 mm STL file · Countersunk screw Ø4 mm (📦 #5813)
1 object(s) - format STL
Download this 3D model of a Ø38 mm pipe clip holder in STL format. The fastening is performed with a flat head screw Ø4 mm. This clip-on pipe holder is built for a stable hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 38 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Pipe support clip Ø63 mm STL 3D file · Countersunk screw Ø4 mm (📦 #5371)
1 object(s) - format STL
Download this 3D model of a Ø63 mm pipe clip holder in STL format. The fastening is achieved by means of a flat head screw Ø4 mm. This pipe support clip is built for a firm hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 63 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on pipe holder Ø37 mm STL file · Countersunk screw Ø4 mm (📦 #5947)
1 object(s) - format STL
Download this 3D model of a Ø37 mm pipe clip in STL format. The mounting is done using a countersunk screw Ø4 mm. This snap-on tube holder is intended for a secure hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 37 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on pipe support Ø36 mm STL 3D file · Countersunk screw Ø4 mm (📦 #3302)
1 object(s) - format STL (5.0/5) 3 vote(s)
Download this 3D model of a Ø36 mm custom pipe clip in STL format. The fastening is performed using a countersunk screw Ø4 mm. This clip-on pipe holder is intended for a firm hold with easy setup.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 36 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube support clip Ø65 mm STL 3D file · Flat head screw Ø4 mm (📦 #4737)
1 object(s) - format STL
Download this 3D file of a Ø65 mm clip-on tube holder in STL format. The fastening is done with a flat head screw Ø4 mm. This clip-on tube holder is designed for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 65 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Tube clip Ø35 mm STL 3D file · Flat head screw Ø4 mm (📦 #3767)
1 object(s) - format STL
Download this 3D model of a Ø35 mm snap-on tube holder in STL format. The fastening is done by means of a flat head screw Ø4 mm. This pipe support clip is intended for a stable hold and simple mounting.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 35 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |
Clip-on pipe holder Ø33 mm STL file · Flat head screw Ø4 mm (📦 #3693)
1 object(s) - format STL
3D model of a Ø33 mm pipe clip in STL format. The installation is done by means of a flat head screw Ø4 mm. This custom pipe holder is designed for a stable hold and quick installation.
| Parameter | Value | Unit |
|---|---|---|
| tube diameter | 33 | mm |
| hole diameter | 4 | mm |
| countersunk screw | yes |