Custom Tubing adapter STL 3D file ⌀ 100–24 mm (Length: 105 mm) 📦#3778
Generation date: 2025-11-26
3D model download
Free- inline-tube-adapter-lenA5mm-di_model3778-nb0_dd{id}.stl : 3.9 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 5 mm (≃3/16 in) |
| #2 | side A outer diameter | 100 mm (≃3 15/16 in) |
| #3 | side A thickness | 2 mm (≃0.08 in) |
| #4 | side B length | 20 mm (≃0.79 in) |
| #5 | side B outer diameter | 24 mm (≃15/16 in) |
| #6 | side B thickness | 2 mm (≃0.08 in) |
| #7 | transition length | 80 mm (≃3.15 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 96 mm (≃3.78 in) |
| inner diameter (side B) | 20 mm (≃0.79 in) |
| total length | 105 mm (≃4 1/8 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tubing adapter STL 3D file ⌀ 100–34 mm (Length: 115 mm) (📦 #3776)
1 object(s) - format STL
Straight tube connector ⌀100 mm to ⌀34 mm in STL format. Length of this adapter is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 5 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 34 | mm |
| side B thickness | 2 | mm |
| transition length | 80 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 100–20 mm (Length: 110 mm) (📦 #3343)
1 object(s) - format STL
Tube adapter ⌀100 mm to ⌀20 mm in STL format. Final length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 20 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)
1 object(s) - format STL (4.7/5) 3 vote(s)
Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 81–61 mm (Length: 115 mm) (📦 #2666)
1 object(s) - format STL
Inline tube coupler ⌀81 mm to ⌀61 mm in STL 3D format. Final length of this coupler is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2 | mm |
| side B length | 15 | mm |
| side B outer diameter | 61 | mm |
| side B thickness | 2 | mm |
| transition length | 85 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)
1 object(s) - format STL
Inline tube coupler ⌀100 mm to ⌀16 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 102–61 mm (Length: 125 mm) (📦 #2667)
1 object(s) - format STL
Inline sleeve ⌀102 mm to ⌀61 mm in STL 3D format. Final length of this junction is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 15 | mm |
| side B outer diameter | 61 | mm |
| side B thickness | 2 | mm |
| transition length | 90 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 83–63 mm (Length: 120 mm) (📦 #2665)
1 object(s) - format STL
Tubing adapter ⌀83 mm to ⌀63 mm in STL 3D format. Length of this adapter is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 83 | mm |
| side A thickness | 3 | mm |
| side B length | 15 | mm |
| side B outer diameter | 63 | mm |
| side B thickness | 3 | mm |
| transition length | 90 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm) (📦 #1969)
1 object(s) - format STL
Inline fitting ⌀82 mm to ⌀61 mm in STL format. Total length of this connector is 100 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 82 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 61 | mm |
| side B thickness | 3 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 80–30 mm (Length: 63 mm) (📦 #3810)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀30 mm in STL 3D format. Length of this reducer is 63 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 5 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 2 | mm |
| transition length | 38 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)
1 object(s) - format STL
Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 76–30 mm (Length: 170 mm) (📦 #3914)
1 object(s) - format STL
Tube coupler ⌀76 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 170 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 76 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 90 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 80–60 mm (Length: 70 mm) (📦 #3752)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀60 mm in STL 3D format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2 | mm |
| side B length | 15 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)
1 object(s) - format STL
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 12.4 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 77–30 mm (Length: 140 mm) (📦 #3916)
1 object(s) - format STL
Tube fitting ⌀77 mm to ⌀30 mm in STL format. Length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 113–40 mm (Length: 85 mm) (📦 #2550)
1 object(s) - format STL
Tube junction ⌀113 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 113 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)
1 object(s) - format STL
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 90 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 68 | mm |
| side B thickness | 2 | mm |
| transition length | 45 | mm |
| axis offset | 10 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 70–25 mm (Length: 50 mm) (📦 #3559)
1 object(s) - format STL
Inline tube adapter ⌀70 mm to ⌀25 mm in STL 3D format. Total length of this sleeve is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 8 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 8 | mm |
| side A outer diameter | 70 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 2 | mm |
| transition length | 22 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)
1 object(s) - format STL
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–26 mm (Length: 180 mm) (📦 #2655)
1 object(s) - format STL
Inline sleeve ⌀60 mm to ⌀26 mm in STL format. Total length of this coupler is 180 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 26 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2.5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm) (📦 #1856)
1 object(s) - format STL
Inline tube reducer ⌀40 mm to ⌀35 mm in STL 3D format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 40 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–15 mm (Length: 90 mm) (📦 #1272)
1 object(s) - format STL
Tube coupler ⌀45 mm to ⌀15 mm in STL format. Total length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)
1 object(s) - format STL
Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 90 mm) (📦 #1260)
1 object(s) - format STL (4.0/5) 1 vote(s)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Total length of this connector is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 90–46 mm (Length: 50 mm) (📦 #3889)
1 object(s) - format STL
Inline tubing adapter ⌀90 mm to ⌀46 mm in STL format. Total length of this junction is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 90 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 46 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 69–46 mm (Length: 85 mm) (📦 #2626)
1 object(s) - format STL
Inline tube coupler ⌀69 mm to ⌀46 mm in STL format. Total length of this adapter is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 69 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 46 | mm |
| side B thickness | 2 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–9 mm (Length: 90 mm) (📦 #1271)
1 object(s) - format STL
Straight tube connector ⌀45 mm to ⌀9 mm in STL 3D format. Total length of this fitting is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 104–81 mm (Length: 140 mm) (📦 #2656)
1 object(s) - format STL
Straight tube connector ⌀104 mm to ⌀81 mm in STL 3D format. Length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 5 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 3 | mm |
| side B length | 5 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 95 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |