?>

Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) 📦#1342

STL Download STL
Create a new model:
from scratch search for a model
Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.
Generation date: 2025-08-12
3D Model Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm)

3D model download

Free
  • inline-tube-adapter-lenA10mm-d_model1342-nb0_dd{id}.stl : 2.9 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Photos of the model once printed

Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm)

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 10 mm
#2 side A outer diameter 100 mm
#3 side A thickness 3 mm
#4 side B length 30 mm
#5 side B outer diameter 16 mm
#6 side B thickness 3 mm
#7 transition length 70 mm
#8 axis offset 0 mm
#9 ends fillet no fillet
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm)
Inline tube coupler ⌀100 mm to ⌀16 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 100 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm) (📦 #1969)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm)
Inline fitting ⌀82 mm to ⌀61 mm in STL format. Total length of this connector is 100 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 82 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 61 mm
side B thickness 3 mm
transition length 60 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm)
Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 61 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 15 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm) (📦 #1856)

1 object(s) - format STL
Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm)
Inline tube reducer ⌀40 mm to ⌀35 mm in STL 3D format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 40 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm)
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm)
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm)
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm) (📦 #1920)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm)
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 46 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 41 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 45–15 mm (Length: 90 mm) (📦 #1272)

1 object(s) - format STL
Tube adapter STL file ⌀ 45–15 mm (Length: 90 mm)
Tube coupler ⌀45 mm to ⌀15 mm in STL format. Total length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 45 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 15 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 45–10 mm (Length: 90 mm) (📦 #1260)

1 object(s) - format STL (4.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 90 mm)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Total length of this connector is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 45 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm)
Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 44 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 45–9 mm (Length: 90 mm) (📦 #1271)

1 object(s) - format STL
Tube adapter STL file ⌀ 45–9 mm (Length: 90 mm)
Straight tube connector ⌀45 mm to ⌀9 mm in STL 3D format. Total length of this fitting is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 45 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 9 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm) (📦 #1443)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm)
Inline tube junction ⌀45 mm to ⌀10 mm in STL 3D format. Total length of this fitting is 97 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 37 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 45 mm
side A thickness 2.5 mm
side B length 37 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm)
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 75 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 60 mm
axis offset 12.4 mm
ends fillet no fillet

Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm)
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 40 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm)
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 81 mm
side A thickness 2.5 mm
side B length 25 mm
side B outer diameter 55 mm
side B thickness 2.5 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)

1 object(s) - format STL
Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm)
Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 180 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm)
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 76 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm)
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm)
Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 150 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 60–48 mm (Length: 45 mm) (📦 #1973)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 60–48 mm (Length: 45 mm)
Inline tube adapter ⌀60 mm to ⌀48 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 48 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm)
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
Parameter Value Unit
side A length 15 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 45 mm
axis offset 10 mm
ends fillet no fillet

Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)

1 object(s) - format STL
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm)
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 86 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 66 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm) (📦 #1269)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm)
Straight tube reducer ⌀38 mm to ⌀10 mm in STL 3D format. Total length of this coupler is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 30 mm
side A outer diameter 38 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 60–30 mm (Length: 140 mm) (📦 #1100)

1 object(s) - format STL (5.0/5) 3 vote(s)
Tube adapter STL file ⌀ 60–30 mm (Length: 140 mm)
Straight sleeve ⌀60 mm to ⌀30 mm in STL 3D format. Final length of this adapter is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The two axes of the tubes are off-center by 13.9 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 60 mm
side A thickness 4 mm
side B length 20 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 100 mm
axis offset 13.9 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm)
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm)
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 88–25 mm (Length: 63 mm) (📦 #1823)

1 object(s) - format STL
Tube adapter STL file ⌀ 88–25 mm (Length: 63 mm)
Tube coupler ⌀88 mm to ⌀25 mm in STL format. Total length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 88 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 25 mm
side B thickness 4 mm
transition length 13 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm) (📦 #1234)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm)
Diameter adapter ⌀60 mm to ⌀45 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet