Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) 📦#1341
Generation date: 2025-08-12
3D model download
Free- inline-tube-adapter-lenA10mm-d_model1341-nb0_dd{id}.stl : 1.7 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 10 mm |
| #2 | side A outer diameter | 100 mm |
| #3 | side A thickness | 3 mm |
| #4 | side B length | 30 mm |
| #5 | side B outer diameter | 16 mm |
| #6 | side B thickness | 3 mm |
| #7 | transition length | 100 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | no fillet |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)
1 object(s) - format STL (4.7/5) 3 vote(s)
Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–30 mm (Length: 140 mm) (📦 #1100)
1 object(s) - format STL (5.0/5) 3 vote(s)
Straight sleeve ⌀60 mm to ⌀30 mm in STL 3D format. Final length of this adapter is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The two axes of the tubes are off-center by 13.9 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 13.9 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm) (📦 #1969)
1 object(s) - format STL
Inline fitting ⌀82 mm to ⌀61 mm in STL format. Total length of this connector is 100 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 82 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 61 | mm |
| side B thickness | 3 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm) (📦 #1856)
1 object(s) - format STL
Inline tube reducer ⌀40 mm to ⌀35 mm in STL 3D format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 40 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)
1 object(s) - format STL
Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)
1 object(s) - format STL
Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)
1 object(s) - format STL
Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 12.4 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2.5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)
1 object(s) - format STL
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Straight sleeve ⌀180 mm to ⌀60 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–15 mm (Length: 165 mm) (📦 #2400)
1 object(s) - format STL
Inline tube reducer ⌀60 mm to ⌀15 mm in STL 3D format. Final length of this junction is 165 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 40 mm. The axes of the tubes are offset by 20 mm. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)
1 object(s) - format STL
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 90 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 68 | mm |
| side B thickness | 2 | mm |
| transition length | 45 | mm |
| axis offset | 10 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm) (📦 #1920)
1 object(s) - format STL
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 46 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–15 mm (Length: 90 mm) (📦 #1272)
1 object(s) - format STL
Tube coupler ⌀45 mm to ⌀15 mm in STL format. Total length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 90 mm) (📦 #1260)
1 object(s) - format STL (4.0/5) 1 vote(s)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Total length of this connector is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)
1 object(s) - format STL
Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–9 mm (Length: 90 mm) (📦 #1271)
1 object(s) - format STL
Straight tube connector ⌀45 mm to ⌀9 mm in STL 3D format. Total length of this fitting is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm) (📦 #1443)
1 object(s) - format STL
Inline tube junction ⌀45 mm to ⌀10 mm in STL 3D format. Total length of this fitting is 97 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 37 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 37 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)
1 object(s) - format STL
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 1 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)
1 object(s) - format STL
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm) (📦 #1269)
1 object(s) - format STL
Straight tube reducer ⌀38 mm to ⌀10 mm in STL 3D format. Total length of this coupler is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 38 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 150–5 mm (Length: 248 mm) (📦 #1705)
1 object(s) - format STL
Inline tube coupler ⌀150 mm to ⌀5 mm in STL 3D format. Final length of this sleeve is 248 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 38 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2.5 | mm |
| side B length | 38 | mm |
| side B outer diameter | 5 | mm |
| side B thickness | 2 | mm |
| transition length | 150 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL (5.0/5) 1 vote(s)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 76 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |