?>

Tube adapter STL file ⌀ 60–26 mm (Length: 180 mm) 📦#2655

STL Download STL
Create a new model:
from scratch search for a model
Inline sleeve ⌀60 mm to ⌀26 mm in STL format. Total length of this coupler is 180 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet on the outside.
Generation date: 2025-10-22
3D Model Tube adapter STL file ⌀ 60–26 mm (Length: 180 mm)

3D model download

Free
  • inline-tube-adapter-lenA40mm-d_model2655-nb0_dd{id}.stl : 4 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 40 mm
#2 side A outer diameter 60 mm
#3 side A thickness 3 mm
#4 side B length 40 mm
#5 side B outer diameter 26 mm
#6 side B thickness 3 mm
#7 transition length 100 mm
#8 axis offset 0 mm
#9 ends fillet fillet on the outside
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm)
Inline tube coupler ⌀100 mm to ⌀16 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 100 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 83–63 mm (Length: 120 mm) (📦 #2665)

1 object(s) - format STL
Tube adapter STL file ⌀ 83–63 mm (Length: 120 mm)
Tubing adapter ⌀83 mm to ⌀63 mm in STL 3D format. Length of this adapter is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 15 mm
side A outer diameter 83 mm
side A thickness 3 mm
side B length 15 mm
side B outer diameter 63 mm
side B thickness 3 mm
transition length 90 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)

1 object(s) - format STL (4.7/5) 3 vote(s)
Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm)
Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm) (📦 #1856)

1 object(s) - format STL
Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm)
Inline tube reducer ⌀40 mm to ⌀35 mm in STL 3D format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 40 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 81–61 mm (Length: 115 mm) (📦 #2666)

1 object(s) - format STL
Tube adapter STL file ⌀ 81–61 mm (Length: 115 mm)
Inline tube coupler ⌀81 mm to ⌀61 mm in STL 3D format. Final length of this coupler is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 15 mm
side A outer diameter 81 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 61 mm
side B thickness 2 mm
transition length 85 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 102–61 mm (Length: 125 mm) (📦 #2667)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 102–61 mm (Length: 125 mm)
Inline sleeve ⌀102 mm to ⌀61 mm in STL 3D format. Final length of this junction is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 102 mm
side A thickness 2 mm
side B length 15 mm
side B outer diameter 61 mm
side B thickness 2 mm
transition length 90 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 104–81 mm (Length: 140 mm) (📦 #2656)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 104–81 mm (Length: 140 mm)
Straight tube connector ⌀104 mm to ⌀81 mm in STL 3D format. Length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 5 mm. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 104 mm
side A thickness 3 mm
side B length 5 mm
side B outer diameter 81 mm
side B thickness 3 mm
transition length 95 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm)
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm)
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 60–30 mm (Length: 140 mm) (📦 #1100)

1 object(s) - format STL (4.8/5) 4 vote(s)
Tube adapter STL file ⌀ 60–30 mm (Length: 140 mm)
Straight sleeve ⌀60 mm to ⌀30 mm in STL 3D format. Final length of this adapter is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The two axes of the tubes are off-center by 13.9 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 60 mm
side A thickness 4 mm
side B length 20 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 100 mm
axis offset 13.9 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm)
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–55 mm (Length: 140 mm) (📦 #2592)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–55 mm (Length: 140 mm)
Tube coupler ⌀80 mm to ⌀55 mm in STL format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 12.4 mm. The ends have a fillet on the inside to ease the connection.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 55 mm
side B thickness 2 mm
transition length 80 mm
axis offset 12.4 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm)
Tube junction ⌀100 mm to ⌀60 mm in STL format. Total length of this junction is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends feature an external fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 60 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm) (📦 #1969)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm)
Inline fitting ⌀82 mm to ⌀61 mm in STL format. Total length of this connector is 100 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 82 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 61 mm
side B thickness 3 mm
transition length 60 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–80 mm (Length: 240 mm) (📦 #1400)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–80 mm (Length: 240 mm)
Straight tube reducer ⌀120 mm to ⌀80 mm in STL 3D format. Length of this connector is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside.
Parameter Value Unit
side A length 50 mm
side A outer diameter 120 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 80 mm
side B thickness 3 mm
transition length 140 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm)
Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 150 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 60–15 mm (Length: 165 mm) (📦 #2400)

1 object(s) - format STL
Tube adapter STL file ⌀ 60–15 mm (Length: 165 mm)
Inline tube reducer ⌀60 mm to ⌀15 mm in STL 3D format. Final length of this junction is 165 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 40 mm. The axes of the tubes are offset by 20 mm. The ends are rounded on the outside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 60 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 15 mm
side B thickness 2 mm
transition length 100 mm
axis offset 20 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm) (📦 #1269)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm)
Straight tube reducer ⌀38 mm to ⌀10 mm in STL 3D format. Total length of this coupler is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 30 mm
side A outer diameter 38 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 113–40 mm (Length: 85 mm) (📦 #2550)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 113–40 mm (Length: 85 mm)
Tube junction ⌀113 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 113 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 40 mm
side B thickness 3 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 150–5 mm (Length: 248 mm) (📦 #1705)

1 object(s) - format STL
Tube adapter STL file ⌀ 150–5 mm (Length: 248 mm)
Inline tube coupler ⌀150 mm to ⌀5 mm in STL 3D format. Final length of this sleeve is 248 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 38 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 60 mm
side A outer diameter 150 mm
side A thickness 2.5 mm
side B length 38 mm
side B outer diameter 5 mm
side B thickness 2 mm
transition length 150 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 140 mm) (📦 #1450)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–50 mm (Length: 140 mm)
Tube reducer ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 60 mm
axis offset 0 mm
ends fillet fillet on bo...

Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm) (📦 #1920)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm)
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 46 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 41 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm)
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 75 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 60 mm
axis offset 12.4 mm
ends fillet no fillet

Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)

1 object(s) - format STL
Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm)
Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 180 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm)
Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 61 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 15 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–50 mm (Length: 100 mm)
Inline fitting ⌀100 mm to ⌀50 mm in STL 3D format. Total length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm)
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 81 mm
side A thickness 2.5 mm
side B length 25 mm
side B outer diameter 55 mm
side B thickness 2.5 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–53 mm (Length: 100 mm) (📦 #1600)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–53 mm (Length: 100 mm)
Inline fitting ⌀100 mm to ⌀53 mm in STL 3D format. Final length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 53 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm) (📦 #1443)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm)
Inline tube junction ⌀45 mm to ⌀10 mm in STL 3D format. Total length of this fitting is 97 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 37 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 45 mm
side A thickness 2.5 mm
side B length 37 mm
side B outer diameter 10 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm)
Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 44 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet