Tube adapter ⌀ 149.6–99.6 mm (Length: 80 mm) 📦#1096
Generation date: 2025-06-16
3D model download
Free- inline-tube-adapter-lenA30mm-d_model1096-nb0_dd{id}.stl : 3.4 Mo
STL
Mesh quality :
not defined
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 30 mm |
| #2 | side A outer diameter | 149.6 mm |
| #3 | side A thickness | 4 mm |
| #4 | side B length | 30 mm |
| #5 | side B outer diameter | 99.6 mm |
| #6 | side B thickness | 4 mm |
| #7 | transition length | 20 mm |
| #8 | axis offset | 24.9 mm |
| #9 | ends fillet | fillet on both inside and outside |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 149.6–99.6 mm (Length: 80 mm) (📦 #1095)
1 object(s) - format STL
Tube fitting ⌀149.6 mm to ⌀99.6 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 4 mm. The axes of the tubes are offset. The ends are rounded to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 14... | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 99.6 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 20 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 100–50 mm (Length: 140 mm) (📦 #1449)
1 object(s) - format STL
Inline tube reducer ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 140 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The axes of the tubes are off-center. The ends are rounded to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 115–105 mm (Length: 120 mm) (📦 #1805)
1 object(s) - format STL
Straight tube adapter ⌀115 mm to ⌀105 mm in STL format. Final length of this adapter is 120 mm. The thickness of the tubes is identical: 5 mm. The axes of the tubes are offset. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 115 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 105 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 100–51 mm (Length: 160 mm) (📦 #1098)
1 object(s) - format STL (5.0/5) 2 vote(s)
Tube junction ⌀100 mm to ⌀51 mm in STL format. Length of this sleeve is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are off-center. The ends have a fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 100–50 mm (Length: 160 mm) (📦 #1448)
1 object(s) - format STL
Tube adapter ⌀100 mm to ⌀50 mm in STL format. Total length of this sleeve is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends are rounded to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 80–50 mm (Length: 120 mm) (📦 #1146)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Total length of this adapter is 120 mm. The thickness of the tubes is identical: 5 mm. The two axes of the tubes are off-center. The ends are rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 30 | mm |
| axis offset | 14.9 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 150–120 mm (Length: 108 mm) (📦 #1105)
1 object(s) - format STL
Tube adapter ⌀150 mm to ⌀120 mm in STL format. Total length of this sleeve is 108 mm. The thickness of the tubes is identical: 5 mm. The axes of the tubes are offset. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 22.5 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 5 | mm |
| side B length | 35.5 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 14 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1456)
1 object(s) - format STL
Inline tube junction ⌀104 mm to ⌀50 mm in STL format. Length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are off-center. The ends are rounded on the inside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1457)
1 object(s) - format STL
Tube junction ⌀104 mm to ⌀50 mm in STL format. Length of this adapter is 85 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends feature an internal fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1458)
1 object(s) - format STL
Diameter adapter ⌀104 mm to ⌀50 mm in STL format. Total length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are rounded on the inside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26.9 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 100–50 mm (Length: 90 mm) (📦 #1455)
1 object(s) - format STL
Tube fitting ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are rounded on the inside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 24.9 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 140–100 mm (Length: 80 mm) (📦 #1217)
1 object(s) - format STL
Straight tube fitting ⌀140 mm to ⌀100 mm in STL format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 19.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–80 mm (Length: 100 mm) (📦 #1745)
1 object(s) - format STL
Tube coupler ⌀100 mm to ⌀80 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends feature a fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 5 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 120–90 mm (Length: 75 mm) (📦 #1164)
1 object(s) - format STL
Inline tube coupler ⌀120 mm to ⌀90 mm in STL format. Final length of this connector is 75 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 135–100 mm (Length: 140 mm) (📦 #1463)
1 object(s) - format STL
Straight tube fitting ⌀135 mm to ⌀100 mm in STL format. Final length of this coupler is 140 mm. The thickness of the tubes is identical: 5 mm. The ends feature an external fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 96–80 mm (Length: 100 mm) (📦 #1529)
1 object(s) - format STL
Straight tube fitting ⌀96 mm to ⌀80 mm in STL format. Final length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature a fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 96 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 150–75 mm (Length: 80 mm) (📦 #1758)
1 object(s) - format STL
Straight sleeve ⌀150 mm to ⌀75 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)
1 object(s) - format STL (4.8/5) 5 vote(s)
Diameter adapter ⌀100 mm to ⌀60 mm in STL format. Total length of this coupler is 70 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 15 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–35 mm (Length: 90 mm) (📦 #1764)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀35 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)
1 object(s) - format STL
Inline tube reducer ⌀102 mm to ⌀90 mm in STL format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 5.9 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 160–90 mm (Length: 250 mm) (📦 #1364)
1 object(s) - format STL
Straight tube fitting ⌀160 mm to ⌀90 mm in STL format. Length of this sleeve is 250 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 110 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 4 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 100–50 mm (Length: 100 mm) (📦 #1470)
1 object(s) - format STL
Straight tube coupler ⌀100 mm to ⌀50 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)
1 object(s) - format STL
Tube junction ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 101 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 100–51 mm (Length: 160 mm) (📦 #1340)
1 object(s) - format STL
Tube junction ⌀100 mm to ⌀51 mm in STL format. Final length of this adapter is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–90 mm (Length: 90 mm) (📦 #1378)
1 object(s) - format STL
Tube reducer ⌀150 mm to ⌀90 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 153–90 mm (Length: 90 mm) (📦 #1380)
1 object(s) - format STL
Straight tube coupler ⌀153 mm to ⌀90 mm in STL format. Total length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 153 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |