Tube adapter STL 3D file ⌀ 80–50 mm (Length: 120 mm) 📦#1146
Generation date: 2025-07-05
3D model download
Free- inline-tube-adapter-lenA50mm-d_model1146-nb0_dd{id}.stl : 8.4 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 50 mm |
| #2 | side A outer diameter | 80 mm |
| #3 | side A thickness | 5 mm |
| #4 | side B length | 40 mm |
| #5 | side B outer diameter | 50 mm |
| #6 | side B thickness | 5 mm |
| #7 | transition length | 30 mm |
| #8 | axis offset | 14.9 mm |
| #9 | ends fillet | fillet on both inside and outside |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL file ⌀ 100–50 mm (Length: 140 mm) (📦 #1449)
1 object(s) - format STL
Straight tube reducer ⌀100 mm to ⌀50 mm in STL 3D format. Length of this coupler is 140 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm as well. The axes of the tubes are off-center by 25.4 mm. The ends have a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 100–50 mm (Length: 160 mm) (📦 #1448)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀50 mm in STL 3D format. Length of this coupler is 160 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are off-center by 25.4 mm. The ends are rounded to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 100–51 mm (Length: 160 mm) (📦 #1098)
1 object(s) - format STL (5.0/5) 2 vote(s)
Diameter adapter ⌀100 mm to ⌀51 mm in STL format. Total length of this reducer is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The axes of the tubes are off-center by 25.4 mm. The ends feature a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 115–105 mm (Length: 120 mm) (📦 #1805)
1 object(s) - format STL
Inline fitting ⌀115 mm to ⌀105 mm in STL 3D format. Final length of this fitting is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 115 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 105 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 123–58 mm (Length: 70 mm) (📦 #2028)
1 object(s) - format STL
Inline tube junction ⌀123 mm to ⌀58 mm in STL 3D format. Final length of this junction is 70 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends feature a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 58 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 50–30 mm (Length: 95 mm) (📦 #1314)
1 object(s) - format STL
Tube fitting ⌀50 mm to ⌀30 mm in STL format. Final length of this reducer is 95 mm. The larger-diameter tube has a thickness of 5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends have a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 149.6–99.6 mm (Length: 80 mm) (📦 #1095)
1 object(s) - format STL
Straight sleeve ⌀149.6 mm to ⌀99.6 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 20 mm. The ends have a fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 149.6 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 99.6 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 52–25 mm (Length: 105 mm) (📦 #2186)
1 object(s) - format STL
Tube junction ⌀52 mm to ⌀25 mm in STL 3D format. Final length of this junction is 105 mm. The larger-diameter tube has a thickness of 6 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 52 | mm |
| side A thickness | 6 | mm |
| side B length | 50 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 117–103 mm (Length: 90 mm) (📦 #2262)
1 object(s) - format STL
Tube adapter ⌀117 mm to ⌀103 mm in STL 3D format. Length of this coupler is 90 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 117 | mm |
| side A thickness | 5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 103 | mm |
| side B thickness | 5 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 51–35 mm (Length: 75 mm) (📦 #1289)
1 object(s) - format STL
Tube coupler ⌀51 mm to ⌀35 mm in STL format. Final length of this reducer is 75 mm. The larger-diameter tube has a thickness of 6 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm as well. The ends are rounded to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 51 | mm |
| side A thickness | 6 | mm |
| side B length | 30 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 149.6–99.6 mm (Length: 80 mm) (📦 #1096)
1 object(s) - format STL (5.0/5) 2 vote(s)
Straight sleeve ⌀149.6 mm to ⌀99.6 mm in STL 3D format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 24.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 149.6 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 99.6 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 24.9 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 124–103 mm (Length: 120 mm) (📦 #2269)
1 object(s) - format STL
Straight sleeve ⌀124 mm to ⌀103 mm in STL format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 124 | mm |
| side A thickness | 6 | mm |
| side B length | 40 | mm |
| side B outer diameter | 103 | mm |
| side B thickness | 6 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 80–35 mm (Length: 90 mm) (📦 #1764)
1 object(s) - format STL
Inline tube coupler ⌀80 mm to ⌀35 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 35–34 mm (Length: 100 mm) (📦 #2033)
1 object(s) - format STL
Tube reducer ⌀35 mm to ⌀34 mm in STL 3D format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 35 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 34 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 51–35 mm (Length: 80 mm) (📦 #1290)
1 object(s) - format STL
Tube reducer ⌀51 mm to ⌀35 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 51 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 135–100 mm (Length: 140 mm) (📦 #1463)
1 object(s) - format STL
Tube adapter ⌀135 mm to ⌀100 mm in STL 3D format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 82–63 mm (Length: 75 mm) (📦 #2117)
1 object(s) - format STL
Straight sleeve ⌀82 mm to ⌀63 mm in STL format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the inside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 82 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 63 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 110–80 mm (Length: 63 mm) (📦 #2394)
1 object(s) - format STL
Straight tube reducer ⌀110 mm to ⌀80 mm in STL format. Final length of this connector is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends feature an external fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 152–98 mm (Length: 190 mm) (📦 #2376)
1 object(s) - format STL
Inline sleeve ⌀152 mm to ⌀98 mm in STL 3D format. Total length of this fitting is 190 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 100 mm. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 152 | mm |
| side A thickness | 5 | mm |
| side B length | 100 | mm |
| side B outer diameter | 98 | mm |
| side B thickness | 5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 111–90 mm (Length: 170 mm) (📦 #1550)
1 object(s) - format STL
Tube connector ⌀111 mm to ⌀90 mm in STL format. Final length of this adapter is 170 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 80 mm. The ends have a fillet on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 111 | mm |
| side A thickness | 5 | mm |
| side B length | 80 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 32–15 mm (Length: 50 mm) (📦 #2441)
1 object(s) - format STL
Inline tube reducer ⌀32 mm to ⌀15 mm in STL format. Length of this adapter is 50 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 32 | mm |
| side A thickness | 3.5 | mm |
| side B length | 20 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 3.5 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 35–30 mm (Length: 55 mm) (📦 #2189)
1 object(s) - format STL
Inline tube junction ⌀35 mm to ⌀30 mm in STL format. Total length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 35 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL 3D file ⌀ 35–29 mm (Length: 55 mm) (📦 #2197)
1 object(s) - format STL
Inline tube reducer ⌀35 mm to ⌀29 mm in STL 3D format. Final length of this junction is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 35 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on bo... |
Tube adapter STL file ⌀ 110–80 mm (Length: 58 mm) (📦 #2395)
1 object(s) - format STL
Straight tube coupler ⌀110 mm to ⌀80 mm in STL format. Total length of this reducer is 58 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 25 mm. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 150–120 mm (Length: 108 mm) (📦 #1105)
1 object(s) - format STL
Inline tube adapter ⌀150 mm to ⌀120 mm in STL format. Final length of this fitting is 108 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 22.5 mm, the smaller one of 35.5 mm. The axes of the tubes are offset by 14 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 22.5 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 5 | mm |
| side B length | 35.5 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 14 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 100–51 mm (Length: 160 mm) (📦 #1340)
1 object(s) - format STL
Straight tube fitting ⌀100 mm to ⌀51 mm in STL format. Total length of this sleeve is 160 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The two axes of the tubes are off-center by 25.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 120–90 mm (Length: 75 mm) (📦 #1164)
1 object(s) - format STL
Inline tube junction ⌀120 mm to ⌀90 mm in STL 3D format. Total length of this fitting is 75 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 50–40 mm (Length: 45 mm) (📦 #1094)
1 object(s) - format STL (5.0/5) 3 vote(s)
Straight tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Total length of this reducer is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |