Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 14

Straight tube connector ⌀60 mm to ⌀42 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the outside to make tube connection easier.

Tube junction ⌀60 mm to ⌀35 mm in STL format. Total length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube reducer ⌀60 mm to ⌀15 mm in STL 3D format. Length of this adapter is 130 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 60 mm. The axes of the tubes are off-center by 9 mm. The ends have no fillet.

Inline tube junction ⌀60 mm to ⌀48 mm in STL format. Total length of this sleeve is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to make tube connection easier.

Inline tube reducer ⌀60 mm to ⌀30 mm in STL format. Length of this fitting is 150 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The axes of the tubes are offset by 14 mm. The ends are rounded.

Tube fitting ⌀60 mm to ⌀50 mm in STL 3D format. Length of this fitting is 230 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have no fillet.

Inline tube reducer ⌀61 mm to ⌀12 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 20 mm. The ends have no fillet.

Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Straight sleeve ⌀61 mm to ⌀12 mm in STL format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 20 mm. The ends are raw.

Inline tubing adapter ⌀61 mm to ⌀58 mm in STL 3D format. Length of this adapter is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube adapter ⌀62 mm to ⌀32 mm in STL 3D format. Total length of this junction is 124 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 64 mm, the smaller one of 40 mm. The ends have no fillet.

Straight tube reducer ⌀62 mm to ⌀50 mm in STL 3D format. Final length of this fitting is 95 mm. The larger-diameter tube has a thickness of 2.9 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The two axes of the tubes are offset by 0.1 mm. The ends are raw.

Inline tube adapter ⌀62 mm to ⌀51 mm in STL format. Total length of this sleeve is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The axes of the tubes are off-center by 0.1 mm. The ends are rounded on the outside.

Tubing adapter ⌀62 mm to ⌀55 mm in STL 3D format. Final length of this adapter is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends feature an external fillet to make tube connection easier.

Straight tube fitting ⌀62 mm to ⌀52 mm in STL format. Length of this junction is 33 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 8 mm, the smaller one of 15 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Inline tube junction ⌀63 mm to ⌀62 mm in STL 3D format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube reducer ⌀63 mm to ⌀56 mm in STL format. Final length of this coupler is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Straight tube connector ⌀63 mm to ⌀56 mm in STL format. Length of this coupler is 70 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.

Tube fitting ⌀63 mm to ⌀58 mm in STL format. Total length of this reducer is 70 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.

Tube adapter ⌀63 mm to ⌀43 mm in STL 3D format. Final length of this fitting is 78 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 18 mm. The ends have a fillet on the inside to make tube connection easier.

Inline tube reducer ⌀63 mm to ⌀46 mm in STL format. Final length of this fitting is 68 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 18 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Diameter adapter ⌀63 mm to ⌀50 mm in STL format. Total length of this coupler is 63 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 18 mm. The ends have no fillet.

Inline tube junction ⌀63 mm to ⌀43 mm in STL 3D format. Length of this junction is 120 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Tube fitting ⌀63 mm to ⌀58 mm in STL 3D format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Diameter adapter ⌀63 mm to ⌀36 mm in STL format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Tube reducer ⌀64 mm to ⌀49 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The ends have no fillet.

Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the inside to ease the connection.

Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this junction is 166 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends are raw.

Tube adapter ⌀64 mm to ⌀60 mm in STL format. Length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.