Custom Tube adapter STL 3D file ⌀ 48–44 mm (Length: 45 mm) 📦#9541
Generation date: 2026-06-19
3D model download
Free- inline-tube-adapter-lenA20mm-d_model9541-nb0_dd{id}.stl : 955.5 Ko
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 20 mm (≃0.79 in) |
| #2 | side A outer diameter | 48 mm (≃1 7/8 in) |
| #3 | side A thickness | 4 mm (≃0.16 in) |
| #4 | side B length | 20 mm (≃0.79 in) |
| #5 | side B outer diameter | 44 mm (≃1.73 in) |
| #6 | side B thickness | 4 mm (≃0.16 in) |
| #7 | transition length | 5 mm (≃3/16 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 40 mm (≃1 9/16 in) |
| inner diameter (side B) | 36 mm (≃1.42 in) |
| total length | 45 mm (≃1.77 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tubing adapter STL file ⌀ 60–58 mm (Length: 45 mm) (📦 #4515)
1 object(s) - format STL
Straight tube fitting ⌀60 mm to ⌀58 mm in STL 3D format. Total length of this adapter is 45 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 58 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 64–49 mm (Length: 63 mm) (📦 #1229)
1 object(s) - format STL
Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 68–52 mm (Length: 65 mm) (📦 #1231)
1 object(s) - format STL
Straight tube fitting ⌀68 mm to ⌀52 mm in STL 3D format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 68–58 mm (Length: 35 mm) (📦 #4514)
1 object(s) - format STL
Straight tube fitting ⌀68 mm to ⌀58 mm in STL format. Total length of this connector is 35 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 58 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 68–53 mm (Length: 65 mm) (📦 #1233)
1 object(s) - format STL
Straight sleeve ⌀68 mm to ⌀53 mm in STL 3D format. Total length of this sleeve is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 39–24 mm (Length: 60 mm) (📦 #9340)
1 object(s) - format STL
Tube coupler ⌀39 mm to ⌀24 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 25 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 39 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 24 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 48–40 mm (Length: 75 mm) (📦 #9505)
1 object(s) - format STL
Inline tube coupler ⌀48 mm to ⌀40 mm in STL format. Total length of this connector is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 48 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 29–25 mm (Length: 40 mm) (📦 #7794)
1 object(s) - format STL
Inline tubing adapter ⌀29 mm to ⌀25 mm in STL format. Final length of this adapter is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 29 | mm |
| side A thickness | 4 | mm |
| side B length | 10 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 37–25 mm (Length: 30 mm) (📦 #7795)
1 object(s) - format STL
Tube connector ⌀37 mm to ⌀25 mm in STL 3D format. Final length of this sleeve is 30 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 37 | mm |
| side A thickness | 4 | mm |
| side B length | 10 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 64–49 mm (Length: 65 mm) (📦 #1230)
1 object(s) - format STL
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 42–41 mm (Length: 45 mm) (📦 #7709)
1 object(s) - format STL
Tube fitting ⌀42 mm to ⌀41 mm in STL 3D format. Total length of this coupler is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 42 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 39–38 mm (Length: 45 mm) (📦 #7706)
1 object(s) - format STL
Tube fitting ⌀39 mm to ⌀38 mm in STL 3D format. Final length of this coupler is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 39 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 38 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 53–40 mm (Length: 35 mm) (📦 #9270)
1 object(s) - format STL
Tube adapter ⌀53 mm to ⌀40 mm in STL 3D format. Final length of this sleeve is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 53 | mm |
| side A thickness | 3 | mm |
| side B length | 15 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 44–24 mm (Length: 75 mm) (📦 #9350)
1 object(s) - format STL
Inline tube adapter ⌀44 mm to ⌀24 mm in STL 3D format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 25 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 24 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 57–46 mm (Length: 35 mm) (📦 #9300)
1 object(s) - format STL
Tube reducer ⌀57 mm to ⌀46 mm in STL format. Total length of this sleeve is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 57 | mm |
| side A thickness | 3 | mm |
| side B length | 15 | mm |
| side B outer diameter | 46 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 40–24 mm (Length: 75 mm) (📦 #9341)
1 object(s) - format STL
Inline tube reducer ⌀40 mm to ⌀24 mm in STL format. Length of this adapter is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 40 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 24 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 67–42 mm (Length: 53 mm) (📦 #8707)
1 object(s) - format STL
Diameter adapter ⌀67 mm to ⌀42 mm in STL 3D format. Length of this fitting is 53 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 23 mm, the smaller one of 20 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 23 | mm |
| side A outer diameter | 67 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 42 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 50–40 mm (Length: 55 mm) (📦 #9450)
1 object(s) - format STL
Tube adapter ⌀50 mm to ⌀40 mm in STL format. Total length of this junction is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 48–32 mm (Length: 75 mm) (📦 #9506)
1 object(s) - format STL
Tube fitting ⌀48 mm to ⌀32 mm in STL format. Length of this fitting is 75 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 48 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 68–52 mm (Length: 85 mm) (📦 #9131)
1 object(s) - format STL
Inline tube junction ⌀68 mm to ⌀52 mm in STL format. Length of this coupler is 85 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 35 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 35–34 mm (Length: 55 mm) (📦 #8183)
1 object(s) - format STL
Straight tube reducer ⌀35 mm to ⌀34 mm in STL 3D format. Total length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 35 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 34 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 42–41 mm (Length: 65 mm) (📦 #7710)
1 object(s) - format STL
Inline sleeve ⌀42 mm to ⌀41 mm in STL 3D format. Total length of this reducer is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 42 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 40–36 mm (Length: 45 mm) (📦 #5726)
1 object(s) - format STL
Inline tube junction ⌀40 mm to ⌀36 mm in STL format. Length of this sleeve is 45 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 40 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 36 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tubing adapter STL 3D file ⌀ 61–58 mm (Length: 60 mm) (📦 #4709)
1 object(s) - format STL
Inline tubing adapter ⌀61 mm to ⌀58 mm in STL 3D format. Length of this adapter is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 58 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 42–37 mm (Length: 70 mm) (📦 #8212)
1 object(s) - format STL
Tube junction ⌀42 mm to ⌀37 mm in STL 3D format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 42 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 37 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 80–70 mm (Length: 40 mm) (📦 #1854)
1 object(s) - format STL
Tube coupler ⌀80 mm to ⌀70 mm in STL 3D format. Length of this reducer is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 25 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 88–25 mm (Length: 63 mm) (📦 #1823)
1 object(s) - format STL
Tube coupler ⌀88 mm to ⌀25 mm in STL format. Total length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 88 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 60–48 mm (Length: 45 mm) (📦 #1973)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀48 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 48 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 55–35 mm (Length: 65 mm) (📦 #7835)
1 object(s) - format STL
Diameter adapter ⌀55 mm to ⌀35 mm in STL 3D format. Total length of this junction is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 55 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 4 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |