Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 6

Tube connector ⌀178 mm to ⌀146 mm in STL format. Final length of this fitting is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the inside to make tube connection easier.

Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.

Straight sleeve ⌀180 mm to ⌀60 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are raw.

Inline tube reducer ⌀180 mm to ⌀100 mm in STL 3D format. Final length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The axes of the tubes are off-center by 39 mm. The ends are not rounded.

Inline tube junction ⌀180 mm to ⌀152 mm in STL format. Final length of this sleeve is 109 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 5 mm. The ends feature an internal fillet to ease the connection.

Diameter adapter ⌀180 mm to ⌀152 mm in STL format. Length of this connector is 159 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 55 mm. The ends are rounded on the inside to ease the connection.

Inline sleeve ⌀180 mm to ⌀150 mm in STL 3D format. Total length of this reducer is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet to make tube connection easier.

Straight tube fitting ⌀180 mm to ⌀150 mm in STL 3D format. Final length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have a fillet on the inside.

Tube adapter ⌀183 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 17 mm. The ends are not rounded.

Tube adapter ⌀183 mm to ⌀97 mm in STL 3D format. Final length of this junction is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 17 mm. The ends are rounded on the inside to make tube connection easier.

Straight tubing adapter ⌀183 mm to ⌀97 mm in STL format. Final length of this connector is 300 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have a fillet on the inside to make tube connection easier.

Tube adapter ⌀184 mm to ⌀150 mm in STL format. Total length of this connector is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the inside to facilitate the connection of the two tubes.

Tube connector ⌀184 mm to ⌀151 mm in STL 3D format. Final length of this adapter is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the inside to facilitate the connection of the two tubes.

Inline tube adapter ⌀184 mm to ⌀156 mm in STL 3D format. Final length of this connector is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the inside.

Straight tube adapter ⌀186 mm to ⌀113 mm in STL 3D format. Total length of this fitting is 163 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 90 mm, the smaller one of 40 mm. The axes of the tubes are offset by 33 mm. The ends feature a fillet.

Straight tube reducer ⌀188 mm to ⌀99 mm in STL 3D format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Inline fitting ⌀190 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 112 mm. The thickness of the tubes is identical: 2.2 mm. The larger-diameter tube has a length of 32 mm, the smaller one of 30 mm. The axes of the tubes are offset by 32 mm. The ends are not rounded.

Straight tube fitting ⌀191 mm to ⌀90 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 50 mm. The ends are not rounded.

Inline tube reducer ⌀192 mm to ⌀162 mm in STL format. Length of this sleeve is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are not rounded.

Inline tubing adapter ⌀195 mm to ⌀125 mm in STL 3D format. Final length of this adapter is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 80 mm as well. The two axes of the tubes are off-center by 25.4 mm. The ends feature a fillet to make tube connection easier.

Inline tube adapter ⌀195 mm to ⌀130 mm in STL format. Length of this connector is 190 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 50 mm. The axes of the tubes are offset by 25.4 mm. The ends are rounded to make tube connection easier.

Diameter adapter ⌀195 mm to ⌀127 mm in STL format. Total length of this junction is 90 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube coupler ⌀196 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.0 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 34 mm. The ends are raw.

Inline fitting ⌀198 mm to ⌀56 mm in STL 3D format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Inline tubing adapter ⌀198 mm to ⌀154 mm in STL 3D format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Straight tube fitting ⌀198 mm to ⌀153 mm in STL format. Total length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The ends are not rounded.

Tube coupler ⌀198 mm to ⌀105 mm in STL format. Final length of this reducer is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 20 mm. The ends feature an internal fillet.

Tube reducer ⌀198 mm to ⌀197 mm in STL 3D format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tubing adapter ⌀199 mm to ⌀141 mm in STL 3D format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The two axes of the tubes are off-center by 14 mm. The ends have no fillet.

Tubing reducer ⌀199 mm to ⌀149 mm in STL format. Total length of this coupler is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.