Custom Tubing adapter STL 3D file ⌀ 165–156 mm (Length: 60 mm) 📦#5845
Generation date: 2026-01-03
3D model download
Free- inline-tube-adapter-lenA20mm-d_model5845-nb0_dd{id}.stl : 1.9 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 20 mm (≃0.79 in) |
| #2 | side A outer diameter | 165 mm (≃6 1/2 in) |
| #3 | side A thickness | 2 mm (≃0.08 in) |
| #4 | side B length | 20 mm (≃0.79 in) |
| #5 | side B outer diameter | 156 mm (≃6.14 in) |
| #6 | side B thickness | 2 mm (≃0.08 in) |
| #7 | transition length | 20 mm (≃0.79 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 161 mm (≃6.34 in) |
| inner diameter (side B) | 152 mm (≃5.98 in) |
| total length | 60 mm (≃2 3/8 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tubing adapter STL file ⌀ 161–160 mm (Length: 50 mm) (📦 #9492)
1 object(s) - format STL
Straight sleeve ⌀161 mm to ⌀160 mm in STL 3D format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 161 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 160 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 170–154 mm (Length: 70 mm) (📦 #2670)
1 object(s) - format STL
Tube reducer ⌀170 mm to ⌀154 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 170 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 200–150 mm (Length: 60 mm) (📦 #7944)
1 object(s) - format STL
Inline sleeve ⌀200 mm to ⌀150 mm in STL 3D format. Total length of this adapter is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 2 | mm |
| side B length | 15 | mm |
| side B outer diameter | 150 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 159–156 mm (Length: 50 mm) (📦 #8478)
1 object(s) - format STL
Straight tube connector ⌀159 mm to ⌀156 mm in STL 3D format. Total length of this junction is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 159 | mm |
| side A thickness | 3 | mm |
| side B length | 15 | mm |
| side B outer diameter | 156 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 145–122 mm (Length: 60 mm) (📦 #6624)
1 object(s) - format STL
Straight tube coupler ⌀145 mm to ⌀122 mm in STL 3D format. Length of this coupler is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 145 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 122 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 164–154 mm (Length: 34 mm) (📦 #7906)
1 object(s) - format STL
Tube adapter ⌀164 mm to ⌀154 mm in STL format. Length of this coupler is 34 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 12 mm, the smaller one of 12 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 12 | mm |
| side A outer diameter | 164 | mm |
| side A thickness | 3 | mm |
| side B length | 12 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 155–129 mm (Length: 85 mm) (📦 #10066)
1 object(s) - format STL
Tube fitting ⌀155 mm to ⌀129 mm in STL 3D format. Length of this connector is 85 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 129 | mm |
| side B thickness | 2.5 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 165–154 mm (Length: 78 mm) (📦 #2662)
1 object(s) - format STL
Diameter adapter ⌀165 mm to ⌀154 mm in STL 3D format. Final length of this reducer is 78 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 165 | mm |
| side A thickness | 2.4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 2.4 | mm |
| transition length | 8 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 158–157 mm (Length: 45 mm) (📦 #8482)
1 object(s) - format STL
Straight tube fitting ⌀158 mm to ⌀157 mm in STL 3D format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 157 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 147–138 mm (Length: 75 mm) (📦 #3044)
1 object(s) - format STL
Tube fitting ⌀147 mm to ⌀138 mm in STL format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 138 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 149–148 mm (Length: 45 mm) (📦 #9583)
1 object(s) - format STL
Tube coupler ⌀149 mm to ⌀148 mm in STL format. Length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 149 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 148 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 154–137 mm (Length: 60 mm) (📦 #9642)
1 object(s) - format STL
Inline tube adapter ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 137 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 155–125 mm (Length: 90 mm) (📦 #10151)
1 object(s) - format STL
Tube adapter ⌀155 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 125 | mm |
| side B thickness | 2 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 147–134 mm (Length: 75 mm) (📦 #3029)
1 object(s) - format STL
Inline sleeve ⌀147 mm to ⌀134 mm in STL format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 134 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 192–162 mm (Length: 15 mm) (📦 #9673)
1 object(s) - format STL
Inline tube reducer ⌀192 mm to ⌀162 mm in STL format. Length of this sleeve is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 5 | mm |
| side A outer diameter | 192 | mm |
| side A thickness | 2 | mm |
| side B length | 5 | mm |
| side B outer diameter | 162 | mm |
| side B thickness | 2 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 150–131 mm (Length: 75 mm) (📦 #3019)
1 object(s) - format STL
Inline tube coupler ⌀150 mm to ⌀131 mm in STL 3D format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 168–155 mm (Length: 65 mm) (📦 #8750)
1 object(s) - format STL
Straight tube adapter ⌀168 mm to ⌀155 mm in STL format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 168 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 155 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 162–155 mm (Length: 65 mm) (📦 #8737)
1 object(s) - format STL
Inline tube coupler ⌀162 mm to ⌀155 mm in STL format. Final length of this adapter is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 162 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 155 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 150–125 mm (Length: 90 mm) (📦 #10133)
1 object(s) - format STL
Straight tubing adapter ⌀150 mm to ⌀125 mm in STL 3D format. Final length of this junction is 90 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 125 | mm |
| side B thickness | 2.5 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 155–130 mm (Length: 95 mm) (📦 #10050)
1 object(s) - format STL
Tube junction ⌀155 mm to ⌀130 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2.5 | mm |
| side B length | 35 | mm |
| side B outer diameter | 130 | mm |
| side B thickness | 2.5 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 200–147 mm (Length: 70 mm) (📦 #7496)
1 object(s) - format STL
Straight tube coupler ⌀200 mm to ⌀147 mm in STL 3D format. Final length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 147 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 153–127 mm (Length: 91 mm) (📦 #2785)
1 object(s) - format STL
Inline tube reducer ⌀153 mm to ⌀127 mm in STL 3D format. Length of this connector is 91 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 31 mm, the smaller one of 20 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 31 | mm |
| side A outer diameter | 153 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 127 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 167–155 mm (Length: 70 mm) (📦 #2680)
1 object(s) - format STL
Inline tubing adapter ⌀167 mm to ⌀155 mm in STL format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 167 | mm |
| side A thickness | 2.4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 155 | mm |
| side B thickness | 2.4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 141–131 mm (Length: 45 mm) (📦 #8590)
1 object(s) - format STL
Straight tube connector ⌀141 mm to ⌀131 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 141 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 150–126 mm (Length: 95 mm) (📦 #9962)
1 object(s) - format STL
Tube connector ⌀150 mm to ⌀126 mm in STL format. Final length of this connector is 95 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2.5 | mm |
| side B length | 35 | mm |
| side B outer diameter | 126 | mm |
| side B thickness | 2.5 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 150–110 mm (Length: 60 mm) (📦 #8064)
1 object(s) - format STL
Inline tube adapter ⌀150 mm to ⌀110 mm in STL 3D format. Length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |