Custom Tube adapter STL 3D file ⌀ 163–80 mm (Length: 110 mm) 📦#6417
Generation date: 2026-01-10
3D model download
Free- inline-tube-adapter-lenA20mm-d_model6417-nb0_dd{id}.stl : 7 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 20 mm (≃0.79 in) |
| #2 | side A outer diameter | 163 mm (≃6.42 in) |
| #3 | side A thickness | 4 mm (≃0.16 in) |
| #4 | side B length | 50 mm (≃1.97 in) |
| #5 | side B outer diameter | 80 mm (≃3.15 in) |
| #6 | side B thickness | 4 mm (≃0.16 in) |
| #7 | transition length | 40 mm (≃1 9/16 in) |
| #8 | axis offset | 10 mm (≃0.39 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 155 mm (≃6.10 in) |
| inner diameter (side B) | 72 mm (≃2.83 in) |
| total length | 110 mm (≃4.33 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tubing adapter STL 3D file ⌀ 116–91 mm (Length: 108 mm) (📦 #6136)
1 object(s) - format STL
Inline tube junction ⌀116 mm to ⌀91 mm in STL 3D format. Final length of this connector is 108 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 58 mm. The axes of the tubes are offset by 12.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 4 | mm |
| side B length | 58 | mm |
| side B outer diameter | 91 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 12.4 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 106–89 mm (Length: 80 mm) (📦 #6584)
1 object(s) - format STL
Tube reducer ⌀106 mm to ⌀89 mm in STL 3D format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 8.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 106 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 25 | mm |
| axis offset | 8.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 107–89 mm (Length: 75 mm) (📦 #6151)
1 object(s) - format STL
Straight tube adapter ⌀107 mm to ⌀89 mm in STL format. Total length of this reducer is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The axes of the tubes are offset by 8.9 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 107 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 8.9 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 106–89 mm (Length: 75 mm) (📦 #6264)
1 object(s) - format STL
Inline tubing adapter ⌀106 mm to ⌀89 mm in STL 3D format. Total length of this connector is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 8.4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 106 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 8.4 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 160–80 mm (Length: 100 mm) (📦 #8274)
1 object(s) - format STL
Straight sleeve ⌀160 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 100 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 4 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 103–75 mm (Length: 80 mm) (📦 #6594)
1 object(s) - format STL
Tube adapter ⌀103 mm to ⌀75 mm in STL format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 35 mm. The two axes of the tubes are off-center by 13.9 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 4 | mm |
| side B length | 35 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 13.9 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 160–72 mm (Length: 100 mm) (📦 #8275)
1 object(s) - format STL
Straight tubing adapter ⌀160 mm to ⌀72 mm in STL 3D format. Length of this connector is 100 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 72 | mm |
| side B thickness | 4 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 159–72 mm (Length: 100 mm) (📦 #8276)
1 object(s) - format STL
Diameter adapter ⌀159 mm to ⌀72 mm in STL format. Final length of this coupler is 100 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 159 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 72 | mm |
| side B thickness | 4 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 104–89 mm (Length: 75 mm) (📦 #6590)
1 object(s) - format STL
Straight tubing adapter ⌀104 mm to ⌀89 mm in STL format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 7.4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 102–89 mm (Length: 75 mm) (📦 #6148)
1 object(s) - format STL
Straight sleeve ⌀102 mm to ⌀89 mm in STL 3D format. Total length of this connector is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 30 mm. The two axes of the tubes are off-center by 6.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 6.4 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 160–80 mm (Length: 120 mm) (📦 #9714)
1 object(s) - format STL
Straight tube reducer ⌀160 mm to ⌀80 mm in STL 3D format. Final length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 3 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 104–75 mm (Length: 130 mm) (📦 #6581)
1 object(s) - format STL
Straight tube adapter ⌀104 mm to ⌀75 mm in STL format. Length of this coupler is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The two axes of the tubes are off-center by 11.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 11.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 154–98 mm (Length: 120 mm) (📦 #8341)
1 object(s) - format STL
Tube reducer ⌀154 mm to ⌀98 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 35 | mm |
| side B outer diameter | 98 | mm |
| side B thickness | 4 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 154–99 mm (Length: 120 mm) (📦 #8348)
1 object(s) - format STL
Straight tubing adapter ⌀154 mm to ⌀99 mm in STL 3D format. Total length of this coupler is 120 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 35 | mm |
| side B outer diameter | 99 | mm |
| side B thickness | 4 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 103–61 mm (Length: 100 mm) (📦 #4667)
1 object(s) - format STL
Tube reducer ⌀103 mm to ⌀61 mm in STL 3D format. Length of this connector is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 10 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 61 | mm |
| side B thickness | 3 | mm |
| transition length | 40 | mm |
| axis offset | 10 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 104–89 mm (Length: 70 mm) (📦 #6152)
1 object(s) - format STL
Straight tube reducer ⌀104 mm to ⌀89 mm in STL format. Total length of this reducer is 70 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The two axes of the tubes are offset by 7.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 89 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 160–80 mm (Length: 90 mm) (📦 #9715)
1 object(s) - format STL
Straight tube coupler ⌀160 mm to ⌀80 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 105–90 mm (Length: 115 mm) (📦 #6125)
1 object(s) - format STL
Tube junction ⌀105 mm to ⌀90 mm in STL 3D format. Total length of this coupler is 115 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 50 mm. The axes of the tubes are offset by 7.4 mm. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 105 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 7.4 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 154–108 mm (Length: 117 mm) (📦 #8345)
1 object(s) - format STL
Tube fitting ⌀154 mm to ⌀108 mm in STL 3D format. Final length of this sleeve is 117 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 35 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 35 | mm |
| side B outer diameter | 108 | mm |
| side B thickness | 4 | mm |
| transition length | 47 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 168–80 mm (Length: 140 mm) (📦 #9601)
1 object(s) - format STL
Straight tube coupler ⌀168 mm to ⌀80 mm in STL format. Length of this fitting is 140 mm. The larger-diameter tube has a thickness of 4 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 168 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 3 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |