Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 26

Model(s) 751 to 780 of 939

Tube adapter STL 3D file ⌀ 78–76 mm (Length: 80 mm) (📦 #9659)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 78–76 mm (Length: 80 mm)
Tube fitting ⌀78 mm to ⌀76 mm in STL 3D format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 76 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 78–76 mm (Length: 35 mm) (📦 #9660)

1 object(s) - format STL
Tubing adapter STL file ⌀ 78–76 mm (Length: 35 mm)
Straight sleeve ⌀78 mm to ⌀76 mm in STL format. Total length of this coupler is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 10 mm. The ends have no fillet.
Parameter Value Unit
side A length 15 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 76 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 78–46 mm (Length: 75 mm) (📦 #10552)

1 object(s) - format STL
Tube adapter STL file ⌀ 78–46 mm (Length: 75 mm)
Tube connector ⌀78 mm to ⌀46 mm in STL 3D format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 78 mm
side A thickness 3 mm
side B length 25 mm
side B outer diameter 46 mm
side B thickness 3 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 78–75 mm (Length: 115 mm) (📦 #11045)

1 object(s) - format STL
Tubing adapter STL file ⌀ 78–75 mm (Length: 115 mm)
Inline tube adapter ⌀78 mm to ⌀75 mm in STL 3D format. Length of this coupler is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 55 mm, the smaller one of 45 mm. The ends are not rounded.
Parameter Value Unit
side A length 55 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 79–78 mm (Length: 80 mm) (📦 #4587)

1 object(s) - format STL
Tubing adapter STL file ⌀ 79–78 mm (Length: 80 mm)
Tubing reducer ⌀79 mm to ⌀78 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 78 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 79–57 mm (Length: 50 mm) (📦 #6937)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 79–57 mm (Length: 50 mm)
Inline tube adapter ⌀79 mm to ⌀57 mm in STL 3D format. Total length of this coupler is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 79 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 57 mm
side B thickness 3 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on bo...

Tubing adapter STL file ⌀ 79–77 mm (Length: 30 mm) (📦 #7237)

1 object(s) - format STL
Tubing adapter STL file ⌀ 79–77 mm (Length: 30 mm)
Tubing adapter ⌀79 mm to ⌀77 mm in STL 3D format. Length of this sleeve is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 10 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 77 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tubing adapter STL 3D file ⌀ 79–40 mm (Length: 60 mm) (📦 #9009)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 79–40 mm (Length: 60 mm)
Tube reducer ⌀79 mm to ⌀40 mm in STL format. Length of this sleeve is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 15 mm. The ends are raw.
Parameter Value Unit
side A length 25 mm
side A outer diameter 79 mm
side A thickness 3 mm
side B length 15 mm
side B outer diameter 40 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 79–36 mm (Length: 176 mm) (📦 #9375)

1 object(s) - format STL
Tube adapter STL file ⌀ 79–36 mm (Length: 176 mm)
Tube connector ⌀79 mm to ⌀36 mm in STL format. Final length of this fitting is 176 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 136 mm. The axes of the tubes are offset by 20 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 136 mm
side B outer diameter 36 mm
side B thickness 2 mm
transition length 10 mm
axis offset 20 mm
ends fillet no fillet

Tube adapter STL file ⌀ 79–36 mm (Length: 186 mm) (📦 #9425)

1 object(s) - format STL
Tube adapter STL file ⌀ 79–36 mm (Length: 186 mm)
Diameter adapter ⌀79 mm to ⌀36 mm in STL format. Final length of this fitting is 186 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 150 mm. The axes of the tubes are offset by 21 mm. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 150 mm
side B outer diameter 36 mm
side B thickness 2 mm
transition length 6 mm
axis offset 21 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 79–36 mm (Length: 180 mm) (📦 #9434)

1 object(s) - format STL
Tubing adapter STL file ⌀ 79–36 mm (Length: 180 mm)
Diameter adapter ⌀79 mm to ⌀36 mm in STL 3D format. Final length of this coupler is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 130 mm. The axes of the tubes are offset by 15 mm. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 130 mm
side B outer diameter 36 mm
side B thickness 2 mm
transition length 20 mm
axis offset 15 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 79–77 mm (Length: 35 mm) (📦 #9665)

1 object(s) - format STL
Tubing adapter STL file ⌀ 79–77 mm (Length: 35 mm)
Tubing adapter ⌀79 mm to ⌀77 mm in STL 3D format. Length of this sleeve is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 10 mm. The ends are raw.
Parameter Value Unit
side A length 15 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 10 mm
side B outer diameter 77 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 79–74 mm (Length: 55 mm) (📦 #10867)

1 object(s) - format STL
Tube adapter STL file ⌀ 79–74 mm (Length: 55 mm)
Straight tube connector ⌀79 mm to ⌀74 mm in STL 3D format. Final length of this fitting is 55 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the outside to ease the connection.
Parameter Value Unit
side A length 25 mm
side A outer diameter 79 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 74 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 120 mm) (📦 #1146)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 120 mm)
Inline tube coupler ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this sleeve is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The two axes of the tubes are off-center by 14.9 mm. The ends are rounded to ease the connection.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 5 mm
transition length 30 mm
axis offset 14.9 mm
ends fillet fillet on bo...

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)

1 object(s) - format STL (4.5/5) 2 vote(s)
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 70 mm
side B thickness 3 mm
transition length 20 mm
axis offset 4.9 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm)
Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 15 mm
axis offset 2.4 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm)
Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm)
Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 101 mm)
Straight tube adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 101 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 46 mm, the smaller one of 45 mm. The axes of the tubes are off-center by 2.4 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 10 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm)
Inline tube coupler ⌀80 mm to ⌀75 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The axes of the tubes are offset by 2.4 mm. The ends have a fillet on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 10 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 65 mm)
Straight tube connector ⌀80 mm to ⌀70 mm in STL 3D format. Total length of this adapter is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 70 mm
side B thickness 4 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 60 mm) (📦 #1359)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 60 mm)
Inline tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm)
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm)
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–35 mm (Length: 90 mm) (📦 #1764)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–35 mm (Length: 90 mm)
Inline tube coupler ⌀80 mm to ⌀35 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends have a fillet to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on bo...

Tube adapter STL file ⌀ 80–70 mm (Length: 40 mm) (📦 #1854)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–70 mm (Length: 40 mm)
Tube coupler ⌀80 mm to ⌀70 mm in STL 3D format. Length of this reducer is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 25 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 80 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 70 mm
side B thickness 4 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm) (📦 #1882)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm)
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1997)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm)
Straight tube reducer ⌀80 mm to ⌀66 mm in STL format. Total length of this fitting is 120 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 20 mm and a length of 30 mm. The ends are raw.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 20 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm)
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet
Can't find the right model? Create it with your specs