Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm) 📦#1214
Generation date: 2025-07-18
3D model download
Free- inline-tube-adapter-lenA46mm-d_model1214-nb0_dd{id}.stl : 3.7 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 46 mm |
| #2 | side A outer diameter | 80 mm |
| #3 | side A thickness | 3 mm |
| #4 | side B length | 45 mm |
| #5 | side B outer diameter | 75 mm |
| #6 | side B thickness | 3 mm |
| #7 | transition length | 20 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | fillet on the outside |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube coupler ⌀86 mm to ⌀81 mm in STL format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 2.4 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)
1 object(s) - format STL
Straight tube adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 101 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 46 mm, the smaller one of 45 mm. The axes of the tubes are off-center by 2.4 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)
1 object(s) - format STL
Inline tube coupler ⌀80 mm to ⌀75 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The axes of the tubes are offset by 2.4 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)
1 object(s) - format STL
Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 3 | mm |
| transition length | 21 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)
1 object(s) - format STL
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 1 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀40 mm in STL 3D format. Final length of this coupler is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 1 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 1 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)
1 object(s) - format STL
Inline tube coupler ⌀69 mm to ⌀65 mm in STL format. Final length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 69 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 75–60 mm (Length: 75 mm) (📦 #2754)
1 object(s) - format STL
Straight tube coupler ⌀75 mm to ⌀60 mm in STL 3D format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 97–70 mm (Length: 90 mm) (📦 #2797)
1 object(s) - format STL
Tubing adapter ⌀97 mm to ⌀70 mm in STL 3D format. Total length of this coupler is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 97 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 97–65 mm (Length: 90 mm) (📦 #2804)
1 object(s) - format STL
Diameter adapter ⌀97 mm to ⌀65 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 97 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 90 mm) (📦 #1936)
1 object(s) - format STL
Straight tube coupler ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are offset by 5.9 mm. The ends have a fillet on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 94 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 5.9 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 106–70 mm (Length: 90 mm) (📦 #2795)
1 object(s) - format STL
Straight tube coupler ⌀106 mm to ⌀70 mm in STL 3D format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 106 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 116–100 mm (Length: 113 mm) (📦 #1868)
1 object(s) - format STL
Tube adapter ⌀116 mm to ⌀100 mm in STL 3D format. Length of this junction is 113 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 103–88 mm (Length: 90 mm) (📦 #2114)
1 object(s) - format STL
Inline tube junction ⌀103 mm to ⌀88 mm in STL format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 88 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 94–90 mm (Length: 80 mm) (📦 #1391)
1 object(s) - format STL
Straight tube fitting ⌀94 mm to ⌀90 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 94 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL (5.0/5) 1 vote(s)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 76 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 95–90 mm (Length: 70 mm) (📦 #1397)
1 object(s) - format STL
Straight sleeve ⌀95 mm to ⌀90 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 95 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)
1 object(s) - format STL
Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 15 | mm |
| axis offset | 2.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 82–63 mm (Length: 75 mm) (📦 #2117)
1 object(s) - format STL
Straight sleeve ⌀82 mm to ⌀63 mm in STL format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the inside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 82 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 63 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 60–47 mm (Length: 80 mm) (📦 #2556)
1 object(s) - format STL
Straight tube reducer ⌀60 mm to ⌀47 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The axes of the tubes are offset by 0.1 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 47 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0.1 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 103–90 mm (Length: 150 mm) (📦 #1767)
1 object(s) - format STL
Inline tube coupler ⌀103 mm to ⌀90 mm in STL format. Final length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 50 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm) (📦 #2313)
1 object(s) - format STL
Inline tube junction ⌀77 mm to ⌀57 mm in STL format. Length of this fitting is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 57 | mm |
| side B thickness | 2 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 66–41 mm (Length: 90 mm) (📦 #1793)
1 object(s) - format STL
Straight tube adapter ⌀66 mm to ⌀41 mm in STL format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 45 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 66 | mm |
| side A thickness | 2 | mm |
| side B length | 45 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 2 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |