?>

Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) 📦#1166

STL Download STL
Create a new model:
from scratch search for a model
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
Generation date: 2025-07-09
3D Model Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm)

3D model download

Free
  • inline-tube-adapter-lenA30mm-d_model1166-nb0_dd{id}.stl : 1.9 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 30 mm
#2 side A outer diameter 80 mm
#3 side A thickness 3 mm
#4 side B length 30 mm
#5 side B outer diameter 70 mm
#6 side B thickness 3 mm
#7 transition length 20 mm
#8 axis offset 4.9 mm
#9 ends fillet no fillet
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 70 mm
side B thickness 3 mm
transition length 20 mm
axis offset 7.4 mm
ends fillet no fillet
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 76 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 45 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 65 mm
side B thickness 3 mm
transition length 21 mm
axis offset 0 mm
ends fillet no fillet
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet
Diameter adapter ⌀60 mm to ⌀45 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 40 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 46 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 41 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet
Straight tube connector ⌀80 mm to ⌀70 mm in STL 3D format. Total length of this adapter is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 70 mm
side B thickness 4 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Straight tube fitting ⌀116 mm to ⌀100 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 116 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 64 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 49 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Inline tube adapter ⌀60 mm to ⌀48 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 20 mm
side B outer diameter 48 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Inline tube junction ⌀70 mm to ⌀42 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 13.8 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 42 mm
side B thickness 3 mm
transition length 20 mm
axis offset 13.8 mm
ends fillet no fillet
Inline tube adapter ⌀115 mm to ⌀100 mm in STL format. Total length of this sleeve is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 115 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet
Inline tube adapter ⌀100 mm to ⌀80 mm in STL format. Total length of this junction is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 25 mm
side A outer diameter 100 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 80 mm
side B thickness 4 mm
transition length 13 mm
axis offset 0 mm
ends fillet no fillet
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet
Straight tube coupler ⌀68 mm to ⌀53 mm in STL 3D format. Final length of this fitting is 65 mm. The larger-diameter tube has a thickness of 2 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 25 mm
side A outer diameter 68 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 53 mm
side B thickness 4 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Straight sleeve ⌀68 mm to ⌀53 mm in STL 3D format. Total length of this sleeve is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 25 mm
side A outer diameter 68 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 53 mm
side B thickness 4 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Inline sleeve ⌀92 mm to ⌀71 mm in STL 3D format. Total length of this adapter is 90 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 10 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The axes of the tubes are offset by 9.1 mm. The ends are raw.
Parameter Value Unit
side A length 10 mm
side A outer diameter 92 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 71 mm
side B thickness 2 mm
transition length 30 mm
axis offset 9.1 mm
ends fillet no fillet
Straight tube fitting ⌀68 mm to ⌀52 mm in STL 3D format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 68 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 52 mm
side B thickness 4 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet
Inline fitting ⌀70 mm to ⌀42 mm in STL 3D format. Final length of this reducer is 87 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 40 mm. The axes of the tubes are off-center by 13.8 mm. The ends are raw.
Parameter Value Unit
side A length 27 mm
side A outer diameter 70 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 42 mm
side B thickness 3 mm
transition length 20 mm
axis offset 13.8 mm
ends fillet no fillet
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 81 mm
side A thickness 2.5 mm
side B length 25 mm
side B outer diameter 55 mm
side B thickness 2.5 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...
Tube adapter ⌀105 mm to ⌀80 mm in STL 3D format. Length of this connector is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 25 mm
side A outer diameter 105 mm
side A thickness 4 mm
side B length 25 mm
side B outer diameter 80 mm
side B thickness 4 mm
transition length 13 mm
axis offset 0 mm
ends fillet no fillet
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 86 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 66 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet
Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 62 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet
Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 2.4 mm
ends fillet fillet on th...