Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 18

Inline tube junction ⌀73 mm to ⌀68 mm in STL 3D format. Length of this sleeve is 70 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.

Inline tubing adapter ⌀73 mm to ⌀64 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends feature an external fillet to facilitate the connection of the two tubes.

Tube fitting ⌀74 mm to ⌀58 mm in STL 3D format. Total length of this adapter is 50 mm. The thickness of the tubes is identical: 20 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 7 mm. The ends have a fillet on the outside to make tube connection easier.

Tube coupler ⌀74 mm to ⌀58 mm in STL format. Length of this coupler is 60 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm as well. The axes of the tubes are off-center by 6 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Tubing adapter ⌀74 mm to ⌀50 mm in STL 3D format. Final length of this junction is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to ease the connection.

Inline fitting ⌀74 mm to ⌀59 mm in STL format. Final length of this coupler is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to ease the connection.

Tubing reducer ⌀74 mm to ⌀60 mm in STL 3D format. Total length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Tube junction ⌀74 mm to ⌀65 mm in STL format. Length of this junction is 49 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an external fillet.

Diameter adapter ⌀74 mm to ⌀67 mm in STL 3D format. Total length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 35 mm. The ends are raw.

Tube connector ⌀74 mm to ⌀64 mm in STL 3D format. Total length of this connector is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 35 mm. The ends have no fillet.

Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.

Straight tube coupler ⌀75 mm to ⌀60 mm in STL 3D format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube adapter ⌀75 mm to ⌀66 mm in STL 3D format. Length of this connector is 120 mm. The larger-diameter tube has a thickness of 4 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm as well. The ends have no fillet.

Tube adapter ⌀75 mm to ⌀25 mm in STL format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 40 mm. The ends are rounded on the inside to ease the connection.

Tube connector ⌀75 mm to ⌀30 mm in STL format. Total length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends feature a fillet to ease the connection.

Inline tubing adapter ⌀75 mm to ⌀60 mm in STL format. Final length of this adapter is 600 mm. The thickness of the tubes is identical: 20 mm. The larger-diameter tube has a length of 200 mm, the smaller one of 200 mm as well. The ends are raw.

Inline sleeve ⌀75 mm to ⌀67 mm in STL format. Final length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 35 mm. The ends are raw.

Inline tube reducer ⌀75 mm to ⌀51 mm in STL format. Total length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube fitting ⌀76 mm to ⌀50 mm in STL 3D format. Length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube coupler ⌀76 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 170 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.

Straight tube reducer ⌀76 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Tubing adapter ⌀76 mm to ⌀63 mm in STL 3D format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline tube adapter ⌀76 mm to ⌀75 mm in STL format. Final length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.

Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.

Inline tube junction ⌀77 mm to ⌀57 mm in STL format. Length of this fitting is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Tube fitting ⌀77 mm to ⌀30 mm in STL format. Length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.

Inline tube adapter ⌀77 mm to ⌀53 mm in STL 3D format. Final length of this adapter is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Tubing adapter ⌀77 mm to ⌀70 mm in STL format. Final length of this adapter is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.