Tube adapter STL 3D file ⌀ 61–12 mm (Length: 90 mm) 📦#1325
Generation date: 2025-08-07
3D model download
Free- inline-tube-adapter-lenA20mm-d_model1325-nb0_dd{id}.stl : 2.2 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 20 mm |
| #2 | side A outer diameter | 61 mm |
| #3 | side A thickness | 2 mm |
| #4 | side B length | 20 mm |
| #5 | side B outer diameter | 12 mm |
| #6 | side B thickness | 2 mm |
| #7 | transition length | 50 mm |
| #8 | axis offset | 20 mm |
| #9 | ends fillet | no fillet |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL file ⌀ 61–12 mm (Length: 95 mm) (📦 #1339)
1 object(s) - format STL (5.0/5) 1 vote(s)
Straight sleeve ⌀61 mm to ⌀12 mm in STL format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–12 mm (Length: 95 mm) (📦 #1674)
1 object(s) - format STL
Straight tube fitting ⌀60 mm to ⌀12 mm in STL 3D format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The two axes of the tubes are offset by 20 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 60–15 mm (Length: 105 mm) (📦 #2404)
1 object(s) - format STL
Tube coupler ⌀60 mm to ⌀15 mm in STL format. Length of this adapter is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 20 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 12.4 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 60–15 mm (Length: 75 mm) (📦 #2407)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀15 mm in STL format. Total length of this adapter is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 30 mm. The axes of the tubes are offset by 20 mm. The ends feature an external fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 94–60 mm (Length: 80 mm) (📦 #1685)
1 object(s) - format STL
Straight sleeve ⌀94 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 15 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 94 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 15 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 70–42 mm (Length: 80 mm) (📦 #1901)
1 object(s) - format STL
Inline tube junction ⌀70 mm to ⌀42 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 13.8 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 70 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 42 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 13.8 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)
1 object(s) - format STL (4.9/5) 7 vote(s)
Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 15 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 70–42 mm (Length: 87 mm) (📦 #1900)
1 object(s) - format STL
Inline fitting ⌀70 mm to ⌀42 mm in STL 3D format. Final length of this reducer is 87 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 40 mm. The axes of the tubes are off-center by 13.8 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 27 | mm |
| side A outer diameter | 70 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 42 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 13.8 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)
1 object(s) - format STL
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 90 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 68 | mm |
| side B thickness | 2 | mm |
| transition length | 45 | mm |
| axis offset | 10 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 85–29 mm (Length: 140 mm) (📦 #1119)
1 object(s) - format STL
Tube coupler ⌀85 mm to ⌀29 mm in STL format. Total length of this reducer is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 27 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–15 mm (Length: 165 mm) (📦 #2400)
1 object(s) - format STL
Inline tube reducer ⌀60 mm to ⌀15 mm in STL 3D format. Final length of this junction is 165 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 40 mm. The axes of the tubes are offset by 20 mm. The ends are rounded on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 20 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)
1 object(s) - format STL
Straight tube connector ⌀61 mm to ⌀15 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 85–29 mm (Length: 180 mm) (📦 #1120)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀85 mm to ⌀29 mm in STL format. Length of this sleeve is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 27 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 16–9 mm (Length: 40 mm) (📦 #1924)
1 object(s) - format STL
Inline tube junction ⌀16 mm to ⌀9 mm in STL format. Final length of this coupler is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are offset by 3.1 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 16 | mm |
| side A thickness | 2 | mm |
| side B length | 10 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 3.1 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 15–9 mm (Length: 40 mm) (📦 #1925)
1 object(s) - format STL
Tube adapter ⌀15 mm to ⌀9 mm in STL 3D format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The two axes of the tubes are offset by 2.9 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 15 | mm |
| side A thickness | 2 | mm |
| side B length | 10 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 2.9 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 100–50 mm (Length: 90 mm) (📦 #1455)
1 object(s) - format STL
Tube adapter ⌀100 mm to ⌀50 mm in STL format. Length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 24.9 mm. The ends have a fillet on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 24.9 | mm |
| ends fillet | fillet on th... |
Tube adapter STL file ⌀ 104–50 mm (Length: 85 mm) (📦 #1456)
1 object(s) - format STL
Diameter adapter ⌀104 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The two axes of the tubes are offset by 25.4 mm. The ends feature an internal fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 25.4 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 90 mm) (📦 #1260)
1 object(s) - format STL (4.0/5) 1 vote(s)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Total length of this connector is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–9 mm (Length: 90 mm) (📦 #1271)
1 object(s) - format STL
Straight tube connector ⌀45 mm to ⌀9 mm in STL 3D format. Total length of this fitting is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 9 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 45–15 mm (Length: 90 mm) (📦 #1272)
1 object(s) - format STL
Tube coupler ⌀45 mm to ⌀15 mm in STL format. Total length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 104–50 mm (Length: 85 mm) (📦 #1457)
1 object(s) - format STL
Tube adapter ⌀104 mm to ⌀50 mm in STL format. Final length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 26 mm. The ends feature an internal fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 44–16 mm (Length: 90 mm) (📦 #1270)
1 object(s) - format STL
Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 104–50 mm (Length: 85 mm) (📦 #1458)
1 object(s) - format STL
Inline tube reducer ⌀104 mm to ⌀50 mm in STL 3D format. Total length of this adapter is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The two axes of the tubes are off-center by 26.9 mm. The ends are rounded on the inside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26.9 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 45–10 mm (Length: 97 mm) (📦 #1443)
1 object(s) - format STL
Inline tube junction ⌀45 mm to ⌀10 mm in STL 3D format. Total length of this fitting is 97 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 37 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 45 | mm |
| side A thickness | 2.5 | mm |
| side B length | 37 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 92–71 mm (Length: 90 mm) (📦 #1371)
1 object(s) - format STL
Inline sleeve ⌀92 mm to ⌀71 mm in STL 3D format. Total length of this adapter is 90 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 10 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The axes of the tubes are offset by 9.1 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 92 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 71 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 9.1 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 23–16 mm (Length: 45 mm) (📦 #1835)
1 object(s) - format STL
Inline tube junction ⌀23 mm to ⌀16 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 2.5 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 5 | mm |
| side A outer diameter | 23 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 2.5 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 44–24 mm (Length: 90 mm) (📦 #2322)
1 object(s) - format STL
Straight tube adapter ⌀44 mm to ⌀24 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 44 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 24 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 38–10 mm (Length: 90 mm) (📦 #1269)
1 object(s) - format STL
Straight tube reducer ⌀38 mm to ⌀10 mm in STL 3D format. Total length of this coupler is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 38 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 10 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 14–13 mm (Length: 70 mm) (📦 #2052)
1 object(s) - format STL
Inline tube adapter ⌀14 mm to ⌀13 mm in STL 3D format. Length of this coupler is 70 mm. The larger-diameter tube has a thickness of 2.1 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 14 | mm |
| side A thickness | 2.1 | mm |
| side B length | 20 | mm |
| side B outer diameter | 13 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |