Washer, Flat gasket, Ring - Inner diameter 50 to 100 mm

Find the listing of 3D models of washer, Flat gasket, Ring with inner diameter 50 to 100 mm, sorted in ascending order.

You can also run a model search here

18 Model(s)

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 12.5 mm + chamfer (📦 #1812)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 12.5 mm + chamfer

Download this model of washer / flat gasket in STL 3D file format. This part has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 12.5 mm. A chamfer is applied on the internal diameter with a value of 0.4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	12.5	mm
finish	1
finish position	0
sides	0
finish value	0.4	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer

Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	1
finish position	0
sides	0
finish value	1	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1814)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer

Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	1
finish position	0
sides	0
finish value	4	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet (📦 #1815)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet

Model of washer / gasket in STL file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A fillet is applied on the internal diameter with a value of 4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	2
finish position	0
sides	0
finish value	4	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm (📦 #1816)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm

Download this file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀57 mm and an outer diameter of ⌀71 mm. The total thickness is 5 mm. No finish is present.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	0
finish position	0
sides	0
finish value	0	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers

3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	1
finish position	2
sides	1
finish value	1	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets (📦 #1818)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets

Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	71	mm
thickness	5	mm
finish	2
finish position	2
sides	0
finish value	3.4	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers

Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	74	mm
thickness	5	mm
finish	1
finish position	2
sides	0
finish value	3.4	mm

Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers (📦 #1820)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers

Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.

Parameter	Value	Unit
inner diameter	57	mm
outer diameter	75	mm
thickness	5	mm
finish	1
finish position	2
sides	0
finish value	4	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet

Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	80	mm
thickness	8	mm
finish	2
finish position	1
sides	0
finish value	2	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets

Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	80	mm
thickness	8	mm
finish	2
finish position	2
sides	0
finish value	4	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets (📦 #1711)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets

3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The part thickness is 10 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are applied on the top and bottom.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	80	mm
thickness	10	mm
finish	2
finish position	2
sides	1
finish value	4.9	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers (📦 #1712)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers

Download this 3D model of flat gasket / washer in STL format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are present on both faces.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	80	mm
thickness	10	mm
finish	1
finish position	2
sides	1
finish value	4.9	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 100 mm thickness: 20 mm + fillet (📦 #1713)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 100 mm thickness: 20 mm + fillet

Download this 3D model of gasket / washer in STL 3D file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀100 mm. The part thickness is 20 mm. A fillet is present on the external diameter with a value of 19.9 mm.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	100	mm
thickness	20	mm
finish	2
finish position	1
sides	0
finish value	19.9	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 10 mm (📦 #1741)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 10 mm

File of gasket / washer in STL format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 10 mm. There is no finish applied.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	60.1	mm
thickness	10	mm
finish	0
finish position	1
sides	0
finish value	0	mm

Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 0.1 mm (📦 #1742)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 0.1 mm

Model of flat gasket / washer in STL 3D file format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 0.1 mm. There is no finish applied.

Parameter	Value	Unit
inner diameter	60	mm
outer diameter	60.1	mm
thickness	0.1	mm
finish	0
finish position	1
sides	0
finish value	0	mm

Washer / Flat Gasket ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers

File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.

Parameter	Value	Unit
inner diameter	70	mm
outer diameter	86	mm
thickness	10	mm
finish	1
finish position	2
sides	0
finish value	3.9	mm

Washer / Flat Gasket ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)

1 object(s) - format STL

3D model Washer / Flat Gasket ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer

3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.

Parameter	Value	Unit
inner diameter	89	mm
outer diameter	118	mm
thickness	3	mm
finish	1
finish position	1
sides	0
finish value	0.1	mm

Can't find the right model? Create it with your parameters