Custom Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets 📦#1818

STL Download STL
Create a new model advanced
from scratch search for a model
Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.
Generation date: 2025-09-16
3D Model Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets

3D model download

Free
  • washer-flat-gasket-ring-inD57m_model1818-nb0_dd{id}.stl : 3.1 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Washer, Flat gasket, Ring template, with the following values:
Parameter Value
#1 inner diameter 57 mm (≃2 1/4 in)
#2 outer diameter 71 mm (≃2.80 in)
#3 thickness 5 mm (≃3/16 in)
#4 finish fillet
#5 finish position inner + outer
#6 sides one side
#7 finish value 3.4 mm (≃1/8 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter inD
#2 outer diameter ouD
#3 thickness thi
#4 finish edgF
#5 finish position edgP
#6 sides sidC
#7 finish value finV

Related 3D models

To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring 

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 5 mm + fillets (📦 #8402)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 5 mm + fillets
3D file of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 5 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 74 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers (📦 #1820)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers
Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 75 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #2284)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
Parameter Value Unit
inner diameter 50 mm
outer diameter 55 mm
thickness 5 mm
finish fillet
finish position outer
sides one side
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)

1 object(s) - format STL (5.0/5) 1 vote(s)
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 70 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer (📦 #9036)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer
3D model of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀35 mm and an outer diameter of ⌀70 mm. The total thickness is 3 mm. A chamfer is present on the outer diameter with a value of 2.9 mm.
Parameter Value Unit
inner diameter 35 mm
outer diameter 70 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 2.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 42 mm thickness: 5 mm + fillets (📦 #3595)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 42 mm thickness: 5 mm + fillets
File of washer / flat gasket in STL format. This part features an internal diameter of ⌀40 mm and an external diameter of ⌀42 mm. The part thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.4 mm.
Parameter Value Unit
inner diameter 40 mm
outer diameter 42 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 4 mm
finish fillet
finish position outer
sides one side
finish value 1 mm

Washer / Flat Gasket STL file ⌀ID: 18.8 mm ⌀OD: 22.1 mm thickness: 10 mm + fillet (📦 #4033)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 18.8 mm ⌀OD: 22.1 mm thickness: 10 mm + fillet
Download this 3D file of washer / flat gasket in STL 3D file format. This model features an inner diameter of ⌀18.8 mm and an outer diameter of ⌀22.1 mm. The thickness is 10 mm. A fillet is applied on the outer diameter with a value of 1.5 mm.
Parameter Value Unit
inner diameter 18.8 mm
outer diameter 22.1 mm
thickness 10 mm
finish fillet
finish position outer
sides one side
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 5 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets (📦 #2786)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 5 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets
Model of washer / flat gasket in STL file format. This part features an internal diameter of ⌀5 mm and an external diameter of ⌀10 mm. The thickness is 2.5 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.5 mm.
Parameter Value Unit
inner diameter 5 mm
outer diameter 10 mm
thickness 2.5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet (📦 #1815)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet
Model of washer / gasket in STL file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A fillet is applied on the internal diameter with a value of 4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish fillet
finish position inner
sides one side
finish value 4 mm

Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 10 mm thickness: 8 mm + fillets (📦 #7388)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 10 mm thickness: 8 mm + fillets
Model of washer / flat gasket in STL 3D file format. This part features an internal diameter of ⌀8 mm and an external diameter of ⌀10 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.4 mm.
Parameter Value Unit
inner diameter 8 mm
outer diameter 10 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.6 mm + chamfer (📦 #3660)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.6 mm + chamfer
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀4 mm and an outer diameter of ⌀25 mm. The part thickness is 2.6 mm. A chamfer is applied on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 4 mm
outer diameter 25 mm
thickness 2.6 mm
finish chamfer
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL file ⌀ID: 10 mm ⌀OD: 12 mm thickness: 2 mm + fillet (📦 #8309)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 10 mm ⌀OD: 12 mm thickness: 2 mm + fillet
3D file of gasket / washer in STL file format. This model has an inner diameter of ⌀10 mm and an outer diameter of ⌀12 mm. The total thickness is 2 mm. A fillet is applied on the outer diameter with a value of 0.9 mm.
Parameter Value Unit
inner diameter 10 mm
outer diameter 12 mm
thickness 2 mm
finish fillet
finish position outer
sides one side
finish value 0.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 8.4 mm ⌀OD: 13.5 mm thickness: 4 mm + chamfers (📦 #6634)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 8.4 mm ⌀OD: 13.5 mm thickness: 4 mm + chamfers
Model of washer / flat gasket in STL format. This part features an inner diameter of ⌀8.4 mm and an outer diameter of ⌀13.5 mm. The thickness is 4 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm.
Parameter Value Unit
inner diameter 8.4 mm
outer diameter 13.5 mm
thickness 4 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 146 mm thickness: 3.1 mm + chamfer (📦 #6970)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 146 mm thickness: 3.1 mm + chamfer
Download this 3D file of gasket / washer in STL file format. This part has an internal diameter of ⌀120.1 mm and an external diameter of ⌀146 mm. The thickness is 3.1 mm. A chamfer is present on the external diameter with a value of 3 mm.
Parameter Value Unit
inner diameter 120.1 mm
outer diameter 146 mm
thickness 3.1 mm
finish chamfer
finish position outer
sides one side
finish value 3 mm

Washer / Flat Gasket STL file ⌀ID: 4 mm ⌀OD: 10 mm thickness: 2.6 mm + chamfer (📦 #3704)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 4 mm ⌀OD: 10 mm thickness: 2.6 mm + chamfer
Model of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀4 mm and an outer diameter of ⌀10 mm. The part thickness is 2.6 mm. A chamfer is present on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 4 mm
outer diameter 10 mm
thickness 2.6 mm
finish chamfer
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 9 mm thickness: 5 mm + fillets (📦 #7389)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 9 mm thickness: 5 mm + fillets
Download this file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀9 mm. The part thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.1 mm.
Parameter Value Unit
inner diameter 8 mm
outer diameter 9 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 8 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets (📦 #7390)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 8 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets
3D model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀8 mm and an external diameter of ⌀10 mm. The thickness is 2.5 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.1 mm.
Parameter Value Unit
inner diameter 8 mm
outer diameter 10 mm
thickness 2.5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL file ⌀ID: 114 mm ⌀OD: 160 mm thickness: 3 mm + chamfer (📦 #7008)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 114 mm ⌀OD: 160 mm thickness: 3 mm + chamfer
Download this file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀114 mm and an external diameter of ⌀160 mm. The thickness is 3 mm. A chamfer is applied on the external diameter with a value of 2.9 mm.
Parameter Value Unit
inner diameter 114 mm
outer diameter 160 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 2.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 107 mm thickness: 4 mm + chamfers (📦 #6712)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 107 mm thickness: 4 mm + chamfers
Download this 3D model of washer / gasket in STL format. This model features an internal diameter of ⌀40 mm and an external diameter of ⌀107 mm. The total thickness is 4 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm.
Parameter Value Unit
inner diameter 40 mm
outer diameter 107 mm
thickness 4 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 0.3 mm

Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 125 mm thickness: 2 mm + chamfer (📦 #6973)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 125 mm thickness: 2 mm + chamfer
Download this 3D model of washer / flat gasket in STL file format. This part has an inner diameter of ⌀120 mm and an outer diameter of ⌀125 mm. The thickness is 2 mm. A chamfer is present on the outer diameter with a value of 1.9 mm.
Parameter Value Unit
inner diameter 120 mm
outer diameter 125 mm
thickness 2 mm
finish chamfer
finish position outer
sides one side
finish value 1.9 mm

Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 130 mm thickness: 2 mm + chamfer (📦 #6974)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 130 mm thickness: 2 mm + chamfer
3D model of washer / gasket in STL file format. This model has an internal diameter of ⌀120 mm and an external diameter of ⌀130 mm. The thickness is 2 mm. A chamfer is present on the external diameter with a value of 1.9 mm.
Parameter Value Unit
inner diameter 120 mm
outer diameter 130 mm
thickness 2 mm
finish chamfer
finish position outer
sides one side
finish value 1.9 mm

Washer / Flat Gasket STL file ⌀ID: 18.8 mm ⌀OD: 22.1 mm thickness: 10 mm + chamfer (📦 #4030)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 18.8 mm ⌀OD: 22.1 mm thickness: 10 mm + chamfer
3D file of gasket / washer in STL file format. This part features an inner diameter of ⌀18.8 mm and an outer diameter of ⌀22.1 mm. The total thickness is 10 mm. A chamfer is present on the outer diameter with a value of 1.5 mm.
Parameter Value Unit
inner diameter 18.8 mm
outer diameter 22.1 mm
thickness 10 mm
finish chamfer
finish position outer
sides one side
finish value 1.5 mm