Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet 📦#2271
Generation date: 2025-10-07
3D model download
Free- washer-flat-gasket-ring-inD50m_model2271-nb0_dd{id}.stl : 1.6 Mo
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 50 mm |
| #2 | outer diameter | 55 mm |
| #3 | thickness | 5 mm |
| #4 | finish | fillet |
| #5 | finish position | outer |
| #6 | sides | one side |
| #7 | finish value | 1.5 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)
1 object(s) - format STL
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets (📦 #1818)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet (📦 #1815)
1 object(s) - format STL
Model of washer / gasket in STL file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A fillet is applied on the internal diameter with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)
1 object(s) - format STL
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 35 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillets (📦 #2309)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This model features an inner diameter of ⌀50 mm and an outer diameter of ⌀55 mm. The thickness is 5 mm. Fillets are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 50 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 74 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1814)
1 object(s) - format STL
Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers (📦 #1820)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 75 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #2284)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 118 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)
1 object(s) - format STL
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 70 | mm |
| outer diameter | 86 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 12.5 mm + chamfer (📦 #1812)
1 object(s) - format STL
Download this model of washer / flat gasket in STL 3D file format. This part has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 12.5 mm. A chamfer is applied on the internal diameter with a value of 0.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 12.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 20 mm thickness: 10 mm + chamfer (📦 #1934)
1 object(s) - format STL
3D file of washer / gasket in STL format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀20 mm. The total thickness is 10 mm. A chamfer is applied on the inner diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 20 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)
1 object(s) - format STL
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 20.0 mm ⌀OD: 22.0 mm thickness: 2.5 mm + fillets (📦 #2208)
1 object(s) - format STL
3D file of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀20.0 mm and an outer diameter of ⌀22.0 mm. The part thickness is 2.5 mm. Fillets are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20.0 | mm |
| outer diameter | 22.0 | mm |
| thickness | 2.5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 18 mm ⌀OD: 22 mm thickness: 0.4 mm + fillets (📦 #1738)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀18 mm and an outer diameter of ⌀22 mm. The part thickness is 0.4 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 22 | mm |
| thickness | 0.4 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |