Custom Washer / Flat Gasket STL 3D file ⌀ID: 9 mm ⌀OD: 18 mm thickness: 2.8 mm + chamfer 📦#3446
Generation date: 2025-11-19
3D model download
Free- washer-flat-gasket-ring-inD9mm_model3446-nb0_dd{id}.stl : 147.7 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 9 mm (≃0.35 in) |
| #2 | outer diameter | 18 mm (≃0.71 in) |
| #3 | thickness | 2.8 mm (≃1/8 in) |
| #4 | finish | chamfer |
| #5 | finish position | outer |
| #6 | sides | one side |
| #7 | finish value | 1.2 mm (≃1/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 35 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 18 mm thickness: 2.8 mm + chamfer (📦 #3447)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀18 mm. The total thickness is 2.8 mm. A chamfer is present on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 18 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3416)
1 object(s) - format STL
3D file of washer / flat gasket in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.8 mm + chamfer (📦 #3448)
1 object(s) - format STL
File of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀8 mm and an outer diameter of ⌀15 mm. The total thickness is 2.8 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.6 mm + chamfer (📦 #3449)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀8 mm and an outer diameter of ⌀15 mm. The part thickness is 2.6 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.4 mm + chamfer (📦 #3450)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 2.4 mm. A chamfer is applied on the internal diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.4 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.2 mm + chamfer (📦 #3452)
1 object(s) - format STL
3D file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The part thickness is 2.2 mm. A chamfer is present on the internal diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.2 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3417)
1 object(s) - format STL
Download this model of washer / flat gasket in STL format. This model has an internal diameter of ⌀9 mm and an external diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 1.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.8 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 3 mm + chamfer (📦 #3453)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3415)
1 object(s) - format STL
Download this model of flat gasket / washer in STL file format. This model has an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the inner diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3418)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This model features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 2.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 20 mm thickness: 10 mm + chamfer (📦 #1934)
1 object(s) - format STL
3D file of washer / gasket in STL format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀20 mm. The total thickness is 10 mm. A chamfer is applied on the inner diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 20 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 5 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets (📦 #2786)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This part features an internal diameter of ⌀5 mm and an external diameter of ⌀10 mm. The thickness is 2.5 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 5 | mm |
| outer diameter | 10 | mm |
| thickness | 2.5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 8.5 mm ⌀OD: 14.3 mm thickness: 2.4 mm (📦 #2729)
1 object(s) - format STL
3D model of gasket / washer in STL format. This part has an internal diameter of ⌀8.5 mm and an external diameter of ⌀14.3 mm. The total thickness is 2.4 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.5 | mm |
| outer diameter | 14.3 | mm |
| thickness | 2.4 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 12 mm ⌀OD: 15 mm thickness: 2 mm (📦 #2771)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This model features an internal diameter of ⌀12 mm and an external diameter of ⌀15 mm. The thickness is 2 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 15 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.2 mm (📦 #2342)
1 object(s) - format STL
Model of gasket / washer in STL file format. This part has an internal diameter of ⌀16.5 mm and an external diameter of ⌀25.0 mm. The total thickness is 3.2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.5 mm (📦 #2341)
1 object(s) - format STL
File of washer / gasket in STL format. This part has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The total thickness is 3.5 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 12 mm ⌀OD: 20 mm thickness: 4 mm (📦 #2769)
1 object(s) - format STL
File of gasket / washer in STL format. This part features an internal diameter of ⌀12 mm and an external diameter of ⌀20 mm. The part thickness is 4 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 20 | mm |
| thickness | 4 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 2.0 mm (📦 #2329)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The part thickness is 2.0 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 2.0 | mm |
| finish | none |