Custom Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet 📦#1815
Generation date: 2025-09-16
3D model download
Free- washer-flat-gasket-ring-inD57m_model1815-nb0_dd{id}.stl : 1.6 Mo
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 57 mm (≃2 1/4 in) |
| #2 | outer diameter | 71 mm (≃2.80 in) |
| #3 | thickness | 5 mm (≃3/16 in) |
| #4 | finish | fillet |
| #5 | finish position | inner |
| #6 | sides | one side |
| #7 | finish value | 4 mm (≃0.16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1814)
1 object(s) - format STL
Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)
1 object(s) - format STL
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 50 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer (📦 #9036)
1 object(s) - format STL
3D model of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀35 mm and an outer diameter of ⌀70 mm. The total thickness is 3 mm. A chamfer is present on the outer diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 35 | mm |
| outer diameter | 70 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 8.3 mm ⌀OD: 15 mm thickness: 6.5 mm + chamfer (📦 #6639)
1 object(s) - format STL
File of flat gasket / washer in STL file format. This model features an inner diameter of ⌀8.3 mm and an outer diameter of ⌀15 mm. The total thickness is 6.5 mm. A chamfer is applied on the inner diameter with a value of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.3 | mm |
| outer diameter | 15 | mm |
| thickness | 6.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 3 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3418)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This model features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 2.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 5 mm + fillets (📦 #8402)
1 object(s) - format STL
3D file of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 5 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 8.4 mm ⌀OD: 13.5 mm thickness: 4 mm + fillet (📦 #6632)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This part has an inner diameter of ⌀8.4 mm and an outer diameter of ⌀13.5 mm. The total thickness is 4 mm. A fillet is applied on the inner diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.4 | mm |
| outer diameter | 13.5 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets (📦 #1818)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 8.3 mm ⌀OD: 14 mm thickness: 5.5 mm + chamfer (📦 #6637)
1 object(s) - format STL
File of gasket / washer in STL format. This part features an inner diameter of ⌀8.3 mm and an outer diameter of ⌀14 mm. The thickness is 5.5 mm. A chamfer is applied on the inner diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.3 | mm |
| outer diameter | 14 | mm |
| thickness | 5.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.6 mm + chamfer (📦 #3663)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀4 mm and an external diameter of ⌀25 mm. The total thickness is 2.6 mm. A chamfer is applied on the internal diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 4 | mm |
| outer diameter | 25 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8.3 mm ⌀OD: 15 mm thickness: 6.5 mm + chamfer (📦 #6640)
1 object(s) - format STL
Download this model of washer / flat gasket in STL 3D file format. This model features an internal diameter of ⌀8.3 mm and an external diameter of ⌀15 mm. The part thickness is 6.5 mm. A chamfer is present on the internal diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.3 | mm |
| outer diameter | 15 | mm |
| thickness | 6.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8.4 mm ⌀OD: 13.5 mm thickness: 4 mm + chamfer (📦 #6636)
1 object(s) - format STL
Model of gasket / washer in STL file format. This model features an internal diameter of ⌀8.4 mm and an external diameter of ⌀13.5 mm. The part thickness is 4 mm. A chamfer is applied on the internal diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.4 | mm |
| outer diameter | 13.5 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 3 mm + chamfer (📦 #3453)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)
1 object(s) - format STL
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL file ⌀ID: 18.8 mm ⌀OD: 22.1 mm thickness: 10 mm + fillet (📦 #4033)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL 3D file format. This model features an inner diameter of ⌀18.8 mm and an outer diameter of ⌀22.1 mm. The thickness is 10 mm. A fillet is applied on the outer diameter with a value of 1.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18.8 | mm |
| outer diameter | 22.1 | mm |
| thickness | 10 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3417)
1 object(s) - format STL
Download this model of washer / flat gasket in STL format. This model has an internal diameter of ⌀9 mm and an external diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the internal diameter with a value of 1.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.8 | mm |
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 41 mm thickness: 4 mm + fillet (📦 #6721)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This model has an internal diameter of ⌀32 mm and an external diameter of ⌀41 mm. The total thickness is 4 mm. A fillet is applied on the internal diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 32 | mm |
| outer diameter | 41 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets (📦 #9188)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an internal diameter of ⌀40 mm and an external diameter of ⌀50 mm. The total thickness is 8 mm. Fillets are applied on the internal diameter, each with a value of 3 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 50 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | two sides | |
| finish value | 3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.6 mm + chamfer (📦 #3660)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀4 mm and an outer diameter of ⌀25 mm. The part thickness is 2.6 mm. A chamfer is applied on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 4 | mm |
| outer diameter | 25 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 18 mm thickness: 2.8 mm + chamfer (📦 #3447)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀18 mm. The total thickness is 2.8 mm. A chamfer is present on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 18 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3416)
1 object(s) - format STL
3D file of washer / flat gasket in STL 3D file format. This part features an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 146 mm thickness: 3.1 mm + chamfer (📦 #6970)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL file format. This part has an internal diameter of ⌀120.1 mm and an external diameter of ⌀146 mm. The thickness is 3.1 mm. A chamfer is present on the external diameter with a value of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120.1 | mm |
| outer diameter | 146 | mm |
| thickness | 3.1 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 3 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.8 mm + chamfer (📦 #3448)
1 object(s) - format STL
File of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀8 mm and an outer diameter of ⌀15 mm. The total thickness is 2.8 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.6 mm + chamfer (📦 #3449)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀8 mm and an outer diameter of ⌀15 mm. The part thickness is 2.6 mm. A chamfer is applied on the inner diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.4 mm + chamfer (📦 #3450)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 2.4 mm. A chamfer is applied on the internal diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.4 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |