?>

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers 📦#1820

STL Download STL
Create a new model:
from scratch search for a model
Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Generation date: 2025-09-16
3D Model Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers

3D model download

Free
  • washer-flat-gasket-ring-inD57m_model1820-nb0_dd{id}.stl : 197 Ko
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the Washer, Flat gasket, Ring template, with the following values:
Parameter Value
#1 inner diameter 57 mm
#2 outer diameter 75 mm
#3 thickness 5 mm
#4 finish chamfer
#5 finish position inner + outer
#6 sides one side
#7 finish value 4 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter inD
#2 outer diameter ouD
#3 thickness thi
#4 finish edgF
#5 finish position edgP
#6 sides sidC
#7 finish value finV

Related 3D models

To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring 

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 74 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #2284)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 70 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets (📦 #1818)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets
Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 3.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
Parameter Value Unit
inner diameter 50 mm
outer diameter 55 mm
thickness 5 mm
finish fillet
finish position outer
sides one side
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1814)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer
Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish chamfer
finish position inner
sides one side
finish value 4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
Parameter Value Unit
inner diameter 25 mm
outer diameter 35 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
Parameter Value Unit
inner diameter 89 mm
outer diameter 118 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 1 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers (📦 #1712)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers
Download this 3D model of flat gasket / washer in STL format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 4.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 4 mm
finish fillet
finish position outer
sides one side
finish value 1 mm