Custom Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 130 mm thickness: 2 mm + chamfer 📦#6974
Generation date: 2026-01-31
3D model download
Free- washer-flat-gasket-ring-inD120_model6974-nb0_dd{id}.stl : 123.1 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 120 mm (≃4.72 in) |
| #2 | outer diameter | 130 mm (≃5 1/8 in) |
| #3 | thickness | 2 mm (≃0.08 in) |
| #4 | finish | chamfer |
| #5 | finish position | outer |
| #6 | sides | one side |
| #7 | finish value | 1.9 mm (≃1/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 125 mm thickness: 2 mm + chamfer (📦 #6973)
1 object(s) - format STL
Download this 3D model of washer / flat gasket in STL file format. This part has an inner diameter of ⌀120 mm and an outer diameter of ⌀125 mm. The thickness is 2 mm. A chamfer is present on the outer diameter with a value of 1.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120 | mm |
| outer diameter | 125 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 125 mm thickness: 2 mm + chamfer (📦 #6972)
1 object(s) - format STL
File of washer / flat gasket in STL format. This model has an inner diameter of ⌀120.1 mm and an outer diameter of ⌀125 mm. The thickness is 2 mm. A chamfer is applied on the outer diameter with a value of 1.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120.1 | mm |
| outer diameter | 125 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 146 mm thickness: 3.1 mm + chamfer (📦 #6970)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL file format. This part has an internal diameter of ⌀120.1 mm and an external diameter of ⌀146 mm. The thickness is 3.1 mm. A chamfer is present on the external diameter with a value of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120.1 | mm |
| outer diameter | 146 | mm |
| thickness | 3.1 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120 mm ⌀OD: 160 mm thickness: 3 mm + chamfer (📦 #7007)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This part features an internal diameter of ⌀120 mm and an external diameter of ⌀160 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120 | mm |
| outer diameter | 160 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 114 mm ⌀OD: 160 mm thickness: 3 mm + chamfer (📦 #7008)
1 object(s) - format STL
Download this file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀114 mm and an external diameter of ⌀160 mm. The thickness is 3 mm. A chamfer is applied on the external diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 114 | mm |
| outer diameter | 160 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 148.7 mm ⌀OD: 150 mm thickness: 5 mm + chamfer (📦 #6655)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model features an internal diameter of ⌀148.7 mm and an external diameter of ⌀150 mm. The total thickness is 5 mm. A chamfer is present on the external diameter with a value of 0.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 148.7 | mm |
| outer diameter | 150 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 118 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer (📦 #9036)
1 object(s) - format STL
3D model of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀35 mm and an outer diameter of ⌀70 mm. The total thickness is 3 mm. A chamfer is present on the outer diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 35 | mm |
| outer diameter | 70 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 74 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 107 mm thickness: 4 mm + chamfers (📦 #6712)
1 object(s) - format STL
Download this 3D model of washer / gasket in STL format. This model features an internal diameter of ⌀40 mm and an external diameter of ⌀107 mm. The total thickness is 4 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 107 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)
1 object(s) - format STL
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 80 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 110 mm ⌀OD: 120 mm thickness: 2 mm (📦 #2357)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This part features an internal diameter of ⌀110 mm and an external diameter of ⌀120 mm. The total thickness is 2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 110 | mm |
| outer diameter | 120 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 114 mm ⌀OD: 120 mm thickness: 3 mm (📦 #7006)
1 object(s) - format STL
Model of washer / gasket in STL format. This part has an inner diameter of ⌀114 mm and an outer diameter of ⌀120 mm. The thickness is 3 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 114 | mm |
| outer diameter | 120 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 113 mm ⌀OD: 120 mm thickness: 3 mm (📦 #7022)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an internal diameter of ⌀113 mm and an external diameter of ⌀120 mm. The total thickness is 3 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 113 | mm |
| outer diameter | 120 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 130 mm ⌀OD: 150 mm thickness: 2 mm (📦 #3412)
1 object(s) - format STL
Download this file of gasket / washer in STL 3D file format. This part has an inner diameter of ⌀130 mm and an outer diameter of ⌀150 mm. The part thickness is 2 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 130 | mm |
| outer diameter | 150 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 140 mm ⌀OD: 143 mm thickness: 1.5 mm (📦 #2870)
1 object(s) - format STL
File of gasket / washer in STL file format. This part has an internal diameter of ⌀140 mm and an external diameter of ⌀143 mm. The thickness is 1.5 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 140 | mm |
| outer diameter | 143 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 130 mm thickness: 0.7 mm (📦 #4230)
1 object(s) - format STL
Download this model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀100 mm and an outer diameter of ⌀130 mm. The total thickness is 0.7 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 130 | mm |
| thickness | 0.7 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 165 mm ⌀OD: 200 mm thickness: 1 mm + fillet (📦 #9668)
1 object(s) - format STL
Download this model of washer / flat gasket in STL format. This part features an inner diameter of ⌀165 mm and an outer diameter of ⌀200 mm. The part thickness is 1 mm. A fillet is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 165 | mm |
| outer diameter | 200 | mm |
| thickness | 1 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 50 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 110 mm thickness: 0.2 mm (📦 #4225)
1 object(s) - format STL
Model of gasket / washer in STL file format. This model has an internal diameter of ⌀100 mm and an external diameter of ⌀110 mm. The part thickness is 0.2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 110 | mm |
| thickness | 0.2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 147 mm ⌀OD: 150 mm thickness: 1.5 mm (📦 #2889)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀147 mm and an outer diameter of ⌀150 mm. The part thickness is 1.5 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 147 | mm |
| outer diameter | 150 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 100 mm thickness: 1.5 mm (📦 #4830)
1 object(s) - format STL
Download this file of gasket / washer in STL file format. This model has an internal diameter of ⌀90 mm and an external diameter of ⌀100 mm. The part thickness is 1.5 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 90 | mm |
| outer diameter | 100 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 150 mm ⌀OD: 152 mm thickness: 0.1 mm (📦 #4222)
1 object(s) - format STL
3D model of washer / flat gasket in STL format. This model has an internal diameter of ⌀150 mm and an external diameter of ⌀152 mm. The part thickness is 0.1 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 150 | mm |
| outer diameter | 152 | mm |
| thickness | 0.1 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 89 mm ⌀OD: 100 mm thickness: 1.5 mm (📦 #9930)
1 object(s) - format STL
Model of washer / gasket in STL format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀100 mm. The total thickness is 1.5 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 100 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 99 mm thickness: 2 mm (📦 #9927)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀99 mm. The part thickness is 2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 99 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 150 mm ⌀OD: 155 mm thickness: 0.1 mm (📦 #4223)
1 object(s) - format STL
Download this file of gasket / washer in STL format. This model has an internal diameter of ⌀150 mm and an external diameter of ⌀155 mm. The part thickness is 0.1 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 150 | mm |
| outer diameter | 155 | mm |
| thickness | 0.1 | mm |
| finish | none |