Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillets 📦#2309

3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.

3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.

3D file of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀20.0 mm and an outer diameter of ⌀22.0 mm. The part thickness is 2.5 mm. Fillets are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are present on both sides.

3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.

Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀18 mm and an outer diameter of ⌀22 mm. The part thickness is 0.4 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.

Download this file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀12 mm and an external diameter of ⌀14 mm. The part thickness is 2 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.2 mm. These finishes are applied on the top and bottom.

Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.

3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The part thickness is 10 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are applied on the top and bottom.

Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.

File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.

Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.

Download this file of washer / gasket in STL format. This part has an internal diameter of ⌀22 mm and an external diameter of ⌀25 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are present on both sides.

Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.

File of washer / flat gasket in STL file format. This part features an inner diameter of ⌀10 mm and an outer diameter of ⌀15 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.

Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.

Download this file of gasket / washer in STL file format. This model features an inner diameter of ⌀0.1 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.

Model of washer / gasket in STL file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A fillet is applied on the internal diameter with a value of 4 mm.

3D model of washer / gasket in STL format. This model has an internal diameter of ⌀18 mm and an external diameter of ⌀24 mm. The total thickness is 10 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on the top and bottom.

Download this 3D file of flat gasket / washer in STL format. This part features an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The thickness is 12 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.