Custom Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets 📦#9188

STL Download STL 1
Create a new model advanced
from scratch search for a model
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an internal diameter of ⌀40 mm and an external diameter of ⌀50 mm. The total thickness is 8 mm. Fillets are applied on the internal diameter, each with a value of 3 mm. These finishes are present on both faces.
Generation date: 2026-05-27
3D Model Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets

3D model download

Free
  • washer-flat-gasket-ring-inD40m_model9188-nb0_dd{id}.stl : 3.1 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Washer, Flat gasket, Ring template, with the following values:
Parameter Value
#1 inner diameter 40 mm (≃1 9/16 in)
#2 outer diameter 50 mm (≃1.97 in)
#3 thickness 8 mm (≃5/16 in)
#4 finish fillet
#5 finish position inner
#6 sides two sides
#7 finish value 3 mm (≃1/8 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter inD
#2 outer diameter ouD
#3 thickness thi
#4 finish edgF
#5 finish position edgP
#6 sides sidC
#7 finish value finV

Related 3D models

To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring 

Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillets (📦 #2309)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillets
Download this 3D model of flat gasket / washer in STL file format. This model features an inner diameter of ⌀50 mm and an outer diameter of ⌀55 mm. The thickness is 5 mm. Fillets are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 50 mm
outer diameter 55 mm
thickness 5 mm
finish fillet
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm + fillets (📦 #9274)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm + fillets
Download this 3D file of gasket / washer in STL file format. This model has an inner diameter of ⌀37 mm and an outer diameter of ⌀39 mm. The part thickness is 10 mm. Fillets are applied on the outer diameter, each with a value of 0.9 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 37 mm
outer diameter 39 mm
thickness 10 mm
finish fillet
finish position outer
sides two sides
finish value 0.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 45 mm thickness: 8 mm + chamfers (📦 #4962)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 45 mm thickness: 8 mm + chamfers
Download this model of gasket / washer in STL file format. This part has an internal diameter of ⌀40 mm and an external diameter of ⌀45 mm. The part thickness is 8 mm. Chamfers are present on the external diameter, each with a value of 2 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 40 mm
outer diameter 45 mm
thickness 8 mm
finish chamfer
finish position outer
sides two sides
finish value 2 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 10 mm + chamfers (📦 #5014)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 10 mm + chamfers
Download this file of gasket / washer in STL format. This part features an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 10 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 10 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)

1 object(s) - format STL (5.0/5) 1 vote(s)
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 6 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 4 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets (📦 #9187)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets
3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀40 mm and an outer diameter of ⌀50 mm. The part thickness is 8 mm. Fillets are applied on the outer diameter, each with a value of 0.1 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 40 mm
outer diameter 50 mm
thickness 8 mm
finish fillet
finish position outer
sides two sides
finish value 0.1 mm

Washer / Flat Gasket STL file ⌀ID: 23 mm ⌀OD: 34 mm thickness: 2 mm + fillets (📦 #7314)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 23 mm ⌀OD: 34 mm thickness: 2 mm + fillets
3D model of gasket / washer in STL file format. This part has an inner diameter of ⌀23 mm and an outer diameter of ⌀34 mm. The total thickness is 2 mm. Fillets are applied on the outer diameter, each with a value of 0.5 mm. These finishes are applied on both sides.
Parameter Value Unit
inner diameter 23 mm
outer diameter 34 mm
thickness 2 mm
finish fillet
finish position outer
sides two sides
finish value 0.5 mm

Washer / Flat Gasket STL file ⌀ID: 6 mm ⌀OD: 15 mm thickness: 6 mm + chamfers (📦 #9033)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 6 mm ⌀OD: 15 mm thickness: 6 mm + chamfers
3D file of washer / gasket in STL format. This model features an inner diameter of ⌀6 mm and an outer diameter of ⌀15 mm. The thickness is 6 mm. Chamfers are applied on the inner diameter, each with a value of 0.2 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 6 mm
outer diameter 15 mm
thickness 6 mm
finish chamfer
finish position inner
sides two sides
finish value 0.2 mm

Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 56 mm thickness: 20 mm + fillets (📦 #8030)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 56 mm thickness: 20 mm + fillets
Download this 3D file of washer / gasket in STL file format. This model has an inner diameter of ⌀50 mm and an outer diameter of ⌀56 mm. The total thickness is 20 mm. Fillets are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
Parameter Value Unit
inner diameter 50 mm
outer diameter 56 mm
thickness 20 mm
finish fillet
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet (📦 #1815)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillet
Model of washer / gasket in STL file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The total thickness is 5 mm. A fillet is applied on the internal diameter with a value of 4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish fillet
finish position inner
sides one side
finish value 4 mm

Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 12 mm thickness: 5.8 mm + chamfers (📦 #7427)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 12 mm thickness: 5.8 mm + chamfers
Download this 3D model of washer / gasket in STL file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀12 mm. The part thickness is 5.8 mm. Chamfers are present on the external diameter, each with a value of 0.3 mm. These finishes are applied on the top and bottom.
Parameter Value Unit
inner diameter 8 mm
outer diameter 12 mm
thickness 5.8 mm
finish chamfer
finish position outer
sides two sides
finish value 0.3 mm

Washer / Flat Gasket STL 3D file ⌀ID: 41 mm ⌀OD: 47 mm thickness: 8 mm + fillets (📦 #4972)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 41 mm ⌀OD: 47 mm thickness: 8 mm + fillets
Download this 3D model of washer / flat gasket in STL 3D file format. This part features an inner diameter of ⌀41 mm and an outer diameter of ⌀47 mm. The part thickness is 8 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.9 mm. These finishes are applied on the top and bottom.
Parameter Value Unit
inner diameter 41 mm
outer diameter 47 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides two sides
finish value 0.9 mm

Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 46 mm thickness: 8 mm + fillets (📦 #4968)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 46 mm thickness: 8 mm + fillets
Model of washer / flat gasket in STL format. This model has an internal diameter of ⌀42 mm and an external diameter of ⌀46 mm. The total thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.9 mm. These finishes are present on both sides.
Parameter Value Unit
inner diameter 42 mm
outer diameter 46 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides two sides
finish value 0.9 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets (📦 #1711)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets
3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The part thickness is 10 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are applied on the top and bottom.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 10 mm
finish fillet
finish position inner + oute...
sides two sides
finish value 4.9 mm

Washer / Flat Gasket STL file ⌀ID: 23 mm ⌀OD: 34 mm thickness: 2 mm + chamfers (📦 #9200)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 23 mm ⌀OD: 34 mm thickness: 2 mm + chamfers
Model of washer / flat gasket in STL format. This model features an inner diameter of ⌀23 mm and an outer diameter of ⌀34 mm. The thickness is 2 mm. Chamfers are applied on the outer diameter, each with a value of 0.2 mm. These finishes are applied on both sides.
Parameter Value Unit
inner diameter 23 mm
outer diameter 34 mm
thickness 2 mm
finish chamfer
finish position outer
sides two sides
finish value 0.2 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
Parameter Value Unit
inner diameter 50 mm
outer diameter 55 mm
thickness 5 mm
finish fillet
finish position outer
sides one side
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1700)

1 object(s) - format STL (5.0/5) 2 vote(s)
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers
File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
Parameter Value Unit
inner diameter 26 mm
outer diameter 40 mm
thickness 8 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 1.5 mm