Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 1

Inline tube adapter ⌀150 mm to ⌀120 mm in STL format. Final length of this fitting is 108 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 22.5 mm, the smaller one of 35.5 mm. The axes of the tubes are offset by 14 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tube connector ⌀150 mm to ⌀90 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 100 mm. The ends feature an external fillet to facilitate the connection of the two tubes.

Tube junction ⌀150 mm to ⌀90 mm in STL format. Total length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.

Straight sleeve ⌀150 mm to ⌀96 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Straight tube reducer ⌀150 mm to ⌀5 mm in STL 3D format. Total length of this connector is 280 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 70 mm. The ends have a fillet on the outside.

Inline tube coupler ⌀150 mm to ⌀5 mm in STL 3D format. Final length of this sleeve is 248 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 38 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Inline sleeve ⌀150 mm to ⌀75 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded on the inside to facilitate the connection of the two tubes.

Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Straight sleeve ⌀150 mm to ⌀110 mm in STL 3D format. Length of this adapter is 195 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 60 mm. The ends have a fillet on the outside.

Straight tubing adapter ⌀150 mm to ⌀90 mm in STL 3D format. Total length of this connector is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to ease the connection.

Straight tubing adapter ⌀150 mm to ⌀123 mm in STL 3D format. Final length of this connector is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded to ease the connection.

Inline sleeve ⌀150 mm to ⌀125 mm in STL 3D format. Total length of this coupler is 127 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 48 mm. The ends feature a fillet.

Straight tube fitting ⌀150 mm to ⌀100 mm in STL 3D format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends have no fillet.

Straight sleeve ⌀150 mm to ⌀100 mm in STL format. Total length of this sleeve is 79 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 29 mm. The ends have a fillet to make tube connection easier.

Inline tube junction ⌀150 mm to ⌀50 mm in STL format. Final length of this reducer is 260 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 80 mm as well. The ends have no fillet.

Tubing adapter ⌀150 mm to ⌀50 mm in STL format. Total length of this sleeve is 350 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 150 mm, the smaller one of 100 mm. The ends are not rounded.

Inline tube coupler ⌀150 mm to ⌀131 mm in STL 3D format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Tubing adapter ⌀150 mm to ⌀40 mm in STL 3D format. Total length of this reducer is 83 mm. The larger-diameter tube has a thickness of 3 mm and a length of 10 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 50 mm. The ends are rounded to ease the connection.

Diameter adapter ⌀150 mm to ⌀101 mm in STL 3D format. Length of this coupler is 99 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 19 mm, the smaller one of 30 mm. The ends have no fillet.

Tube reducer ⌀150 mm to ⌀144 mm in STL format. Final length of this fitting is 120 mm. The larger-diameter tube has a thickness of 10 mm and a sleeve length of 50 mm. The smaller-diameter tube has a thickness of 20 mm and a length of 50 mm as well. The ends are raw.

Diameter adapter ⌀150 mm to ⌀144 mm in STL format. Final length of this junction is 30 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Inline tubing adapter ⌀150 mm to ⌀144 mm in STL 3D format. Total length of this junction is 70 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 40 mm. The ends are not rounded.

Straight tube adapter ⌀150 mm to ⌀40 mm in STL format. Length of this adapter is 140 mm. The thickness of the tubes is identical: 8 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Diameter adapter ⌀150 mm to ⌀90 mm in STL 3D format. Length of this junction is 140 mm. The thickness of the tubes is identical: 8 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded on the outside to ease the connection.

Inline tube reducer ⌀150 mm to ⌀30 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tubing reducer ⌀150 mm to ⌀99 mm in STL format. Total length of this reducer is 205 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 40 mm. The axes of the tubes are off-center by 25 mm. The ends feature an internal fillet.

Inline tube reducer ⌀150 mm to ⌀100 mm in STL format. Length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.

Inline tube reducer ⌀150 mm to ⌀110 mm in STL format. Final length of this reducer is 170 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 60 mm as well. The two axes of the tubes are offset by 14 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tube reducer ⌀150 mm to ⌀66 mm in STL format. Length of this fitting is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight tube fitting ⌀150 mm to ⌀120 mm in STL format. Final length of this coupler is 155 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 100 mm. The ends have a fillet to make tube connection easier.