Custom Tube adapter STL file ⌀ 150–66 mm (Length: 120 mm) 📦#6876

STL Download STL 1
Create a new model expert
from scratch search for a model
Straight tube reducer ⌀150 mm to ⌀66 mm in STL format. Length of this fitting is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
Generation date: 2026-01-27
3D Model Tube adapter STL file ⌀ 150–66 mm (Length: 120 mm)

3D model download

Free
  • inline-tube-adapter-lenA40mm-d_model6876-nb0_dd{id}.stl : 12.4 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 40 mm (≃1 9/16 in)
#2 side A outer diameter 150 mm (≃5.91 in)
#3 side A thickness 2 mm (≃0.08 in)
#4 side B length 40 mm (≃1 9/16 in)
#5 side B outer diameter 66 mm (≃2.60 in)
#6 side B thickness 2 mm (≃0.08 in)
#7 transition length 40 mm (≃1 9/16 in)
#8 axis offset 0 mm (0 in)
#9 ends fillet no fillet
Metadata Value
inner diameter (side A) 146 mm (≃5 3/4 in)
inner diameter (side B) 62 mm (≃2 7/16 in)
total length 120 mm (≃4.72 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 129–78 mm (Length: 105 mm) (📦 #7442)

1 object(s) - format STL
Tube adapter STL file ⌀ 129–78 mm (Length: 105 mm)
Tube adapter ⌀129 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 129 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 78 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 127–78 mm (Length: 105 mm) (📦 #2460)

1 object(s) - format STL
Tube adapter STL file ⌀ 127–78 mm (Length: 105 mm)
Tube adapter ⌀127 mm to ⌀78 mm in STL 3D format. Total length of this junction is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
Parameter Value Unit
side A length 40 mm
side A outer diameter 127 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 78 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 122–78 mm (Length: 105 mm) (📦 #2459)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 122–78 mm (Length: 105 mm)
Inline tube reducer ⌀122 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
Parameter Value Unit
side A length 40 mm
side A outer diameter 122 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 78 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 160–80 mm (Length: 120 mm) (📦 #9714)

1 object(s) - format STL
Tubing adapter STL file ⌀ 160–80 mm (Length: 120 mm)
Straight tube reducer ⌀160 mm to ⌀80 mm in STL 3D format. Final length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
Parameter Value Unit
side A length 40 mm
side A outer diameter 160 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 80 mm
side B thickness 3 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 150–100 mm (Length: 105 mm) (📦 #5865)

1 object(s) - format STL
Tubing adapter STL file ⌀ 150–100 mm (Length: 105 mm)
Inline tube reducer ⌀150 mm to ⌀100 mm in STL format. Length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 35 mm
side A outer diameter 150 mm
side A thickness 2 mm
side B length 35 mm
side B outer diameter 100 mm
side B thickness 2 mm
transition length 35 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 146–38 mm (Length: 120 mm) (📦 #9280)

1 object(s) - format STL
Tubing adapter STL file ⌀ 146–38 mm (Length: 120 mm)
Straight tubing adapter ⌀146 mm to ⌀38 mm in STL 3D format. Length of this connector is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 35 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 35 mm
side A outer diameter 146 mm
side A thickness 3 mm
side B length 35 mm
side B outer diameter 38 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 151–40 mm (Length: 100 mm) (📦 #9176)

1 object(s) - format STL
Tube adapter STL file ⌀ 151–40 mm (Length: 100 mm)
Inline tube junction ⌀151 mm to ⌀40 mm in STL 3D format. Final length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 151 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 40 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 160–80 mm (Length: 90 mm) (📦 #9715)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 160–80 mm (Length: 90 mm)
Straight tube coupler ⌀160 mm to ⌀80 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 160 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 80 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 120–93 mm (Length: 110 mm) (📦 #3748)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 120–93 mm (Length: 110 mm)
Straight tube connector ⌀120 mm to ⌀93 mm in STL format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 93 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 112–75 mm (Length: 80 mm) (📦 #6671)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 112–75 mm (Length: 80 mm)
Inline tube coupler ⌀112 mm to ⌀75 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 25 mm
side A outer diameter 112 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 140–100 mm (Length: 110 mm) (📦 #7137)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 140–100 mm (Length: 110 mm)
Inline tube junction ⌀140 mm to ⌀100 mm in STL format. Length of this junction is 110 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 140 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm)
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 100–78 mm (Length: 150 mm) (📦 #9482)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 100–78 mm (Length: 150 mm)
Tube reducer ⌀100 mm to ⌀78 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 78 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 129–60 mm (Length: 130 mm) (📦 #4678)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 129–60 mm (Length: 130 mm)
Diameter adapter ⌀129 mm to ⌀60 mm in STL 3D format. Length of this reducer is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 60 mm
side A outer diameter 129 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 60 mm
side B thickness 3 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–80 mm (Length: 90 mm) (📦 #5519)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–80 mm (Length: 90 mm)
Tube adapter ⌀120 mm to ⌀80 mm in STL 3D format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 120 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 80 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–61 mm (Length: 70 mm) (📦 #8832)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–61 mm (Length: 70 mm)
Diameter adapter ⌀120 mm to ⌀61 mm in STL 3D format. Total length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 61 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 99–49 mm (Length: 150 mm) (📦 #9481)

1 object(s) - format STL
Tubing adapter STL file ⌀ 99–49 mm (Length: 150 mm)
Straight tube connector ⌀99 mm to ⌀49 mm in STL format. Total length of this coupler is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 99 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 49 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 148–101 mm (Length: 100 mm) (📦 #4285)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 148–101 mm (Length: 100 mm)
Tube fitting ⌀148 mm to ⌀101 mm in STL format. Final length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 148 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 101 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 115–65 mm (Length: 100 mm) (📦 #3424)

1 object(s) - format STL
Tubing adapter STL file ⌀ 115–65 mm (Length: 100 mm)
Inline tubing adapter ⌀115 mm to ⌀65 mm in STL format. Length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends are rounded on the outside.
Parameter Value Unit
side A length 30 mm
side A outer diameter 115 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 65 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tubing adapter STL file ⌀ 115–62 mm (Length: 100 mm) (📦 #3425)

1 object(s) - format STL
Tubing adapter STL file ⌀ 115–62 mm (Length: 100 mm)
Straight tube fitting ⌀115 mm to ⌀62 mm in STL format. Length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 40 mm. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length 30 mm
side A outer diameter 115 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 62 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 144–101 mm (Length: 100 mm) (📦 #4284)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 144–101 mm (Length: 100 mm)
Inline tube reducer ⌀144 mm to ⌀101 mm in STL format. Final length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 144 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 101 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 150–96 mm (Length: 150 mm)
Straight sleeve ⌀150 mm to ⌀96 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 150 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 96 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 125–80 mm (Length: 150 mm) (📦 #7464)

1 object(s) - format STL
Tube adapter STL file ⌀ 125–80 mm (Length: 150 mm)
Inline fitting ⌀125 mm to ⌀80 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the outside.
Parameter Value Unit
side A length 50 mm
side A outer diameter 125 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet fillet on th...

Tubing adapter STL file ⌀ 150–101 mm (Length: 99 mm) (📦 #4289)

1 object(s) - format STL
Tubing adapter STL file ⌀ 150–101 mm (Length: 99 mm)
Diameter adapter ⌀150 mm to ⌀101 mm in STL 3D format. Length of this coupler is 99 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 19 mm, the smaller one of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 19 mm
side A outer diameter 150 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 101 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 149–101 mm (Length: 99 mm) (📦 #4290)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 149–101 mm (Length: 99 mm)
Tubing adapter ⌀149 mm to ⌀101 mm in STL format. Final length of this junction is 99 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 19 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 19 mm
side A outer diameter 149 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 101 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 100–80 mm (Length: 140 mm) (📦 #9439)

1 object(s) - format STL
Tubing adapter STL file ⌀ 100–80 mm (Length: 140 mm)
Straight tubing adapter ⌀100 mm to ⌀80 mm in STL format. Final length of this coupler is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are offset by 5 mm. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 40 mm
axis offset 5 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 110–75 mm (Length: 110 mm) (📦 #6669)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 110–75 mm (Length: 110 mm)
Inline tube coupler ⌀110 mm to ⌀75 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 110 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 110–75 mm (Length: 90 mm) (📦 #6670)

1 object(s) - format STL
Tubing adapter STL file ⌀ 110–75 mm (Length: 90 mm)
Inline tube reducer ⌀110 mm to ⌀75 mm in STL 3D format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 110 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 130–110 mm (Length: 140 mm) (📦 #6063)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 130–110 mm (Length: 140 mm)
Straight tubing adapter ⌀130 mm to ⌀110 mm in STL format. Final length of this fitting is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 130 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 110 mm
side B thickness 2 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 154–102 mm (Length: 120 mm) (📦 #8350)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 154–102 mm (Length: 120 mm)
Straight tube connector ⌀154 mm to ⌀102 mm in STL format. Length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 35 mm
side A outer diameter 154 mm
side A thickness 3 mm
side B length 35 mm
side B outer diameter 102 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet