Tube adapter ⌀ 150–5 mm (Length: 248 mm) 📦#1705
Generation date: 2025-09-10
3D model download
Free- inline-tube-adapter-lenA60mm-d_model1705-nb0_dd{id}.stl : 6.8 Mo
STL
Mesh quality :
0.05
0.05
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 60 mm |
| #2 | side A outer diameter | 150 mm |
| #3 | side A thickness | 2.5 mm |
| #4 | side B length | 38 mm |
| #5 | side B outer diameter | 5 mm |
| #6 | side B thickness | 2 mm |
| #7 | transition length | 150 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | fillet on the outside |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 150–5 mm (Length: 280 mm) (📦 #1703)
1 object(s) - format STL
Diameter adapter ⌀150 mm to ⌀5 mm in STL format. Length of this reducer is 280 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2.5 | mm |
| side B length | 70 | mm |
| side B outer diameter | 5 | mm |
| side B thickness | 2 | mm |
| transition length | 150 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 120–80 mm (Length: 240 mm) (📦 #1400)
1 object(s) - format STL
Tube reducer ⌀120 mm to ⌀80 mm in STL format. Length of this connector is 240 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the inside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 3 | mm |
| transition length | 140 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)
1 object(s) - format STL
Tube junction ⌀180 mm to ⌀16 mm in STL format. Final length of this reducer is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)
1 object(s) - format STL
Tube junction ⌀100 mm to ⌀16 mm in STL format. Length of this junction is 140 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 280–5 mm (Length: 329 mm) (📦 #1572)
1 object(s) - format STL
Inline fitting ⌀280 mm to ⌀5 mm in STL format. Total length of this adapter is 329 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends feature an external fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 280 | mm |
| side A thickness | 2.5 | mm |
| side B length | 70 | mm |
| side B outer diameter | 5 | mm |
| side B thickness | 2 | mm |
| transition length | 199 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Inline tube junction ⌀180 mm to ⌀60 mm in STL format. Total length of this adapter is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)
1 object(s) - format STL
Straight tube coupler ⌀100 mm to ⌀60 mm in STL format. Length of this connector is 180 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 60 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)
1 object(s) - format STL
Inline tube reducer ⌀150 mm to ⌀75 mm in STL format. Final length of this connector is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)
1 object(s) - format STL (4.5/5) 2 vote(s)
Tube adapter ⌀100 mm to ⌀16 mm in STL format. Final length of this junction is 110 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–29 mm (Length: 180 mm) (📦 #1120)
1 object(s) - format STL (5.0/5) 1 vote(s)
Straight tube reducer ⌀85 mm to ⌀29 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 60–30 mm (Length: 140 mm) (📦 #1100)
1 object(s) - format STL (5.0/5) 2 vote(s)
Inline tube reducer ⌀60 mm to ⌀30 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 13.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–29 mm (Length: 140 mm) (📦 #1119)
1 object(s) - format STL
Tube connector ⌀85 mm to ⌀29 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–50 mm (Length: 140 mm) (📦 #1450)
1 object(s) - format STL
Inline tube adapter ⌀100 mm to ⌀50 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The ends feature a fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)
1 object(s) - format STL
Straight tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this reducer is 125 mm. The thickness of the tubes is identical: 2.5 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀50 mm in STL format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The two axes of the tubes are off-center. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 1 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube adapter ⌀75 mm to ⌀50 mm in STL format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 12.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)
1 object(s) - format STL
Tube connector ⌀100 mm to ⌀50 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 100–53 mm (Length: 100 mm) (📦 #1600)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀53 mm in STL format. Length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the inside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 152–52 mm (Length: 180 mm) (📦 #1788)
1 object(s) - format STL
Inline tube adapter ⌀152 mm to ⌀52 mm in STL format. Length of this fitting is 180 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are offset. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 152 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 2 | mm |
| transition length | 120 | mm |
| axis offset | 35.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)
1 object(s) - format STL
Straight tube adapter ⌀150 mm to ⌀96 mm in STL format. Length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 96 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–90 mm (Length: 200 mm) (📦 #1372)
1 object(s) - format STL
Inline tube junction ⌀150 mm to ⌀90 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 61–15 mm (Length: 80 mm) (📦 #1326)
1 object(s) - format STL
Tube fitting ⌀61 mm to ⌀15 mm in STL format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 15 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 60–12 mm (Length: 95 mm) (📦 #1674)
1 object(s) - format STL
Inline tube coupler ⌀60 mm to ⌀12 mm in STL format. Total length of this adapter is 95 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are off-center. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 100–50 mm (Length: 90 mm) (📦 #1454)
1 object(s) - format STL
Diameter adapter ⌀100 mm to ⌀50 mm in STL format. Final length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 150–75 mm (Length: 80 mm) (📦 #1758)
1 object(s) - format STL
Straight sleeve ⌀150 mm to ⌀75 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 100–50 mm (Length: 100 mm) (📦 #1470)
1 object(s) - format STL
Straight tube coupler ⌀100 mm to ⌀50 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 147–75 mm (Length: 180 mm) (📦 #1237)
1 object(s) - format STL
Straight tube connector ⌀147 mm to ⌀75 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 120 | mm |
| axis offset | 35.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 61–12 mm (Length: 95 mm) (📦 #1339)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube reducer ⌀61 mm to ⌀12 mm in STL format. Final length of this fitting is 95 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Diameter adapter ⌀81 mm to ⌀55 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 81 | mm |
| side A thickness | 2.5 | mm |
| side B length | 25 | mm |
| side B outer diameter | 55 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 149–100 mm (Length: 200 mm) (📦 #1288)
1 object(s) - format STL (5.0/5) 2 vote(s)
Straight tube adapter ⌀149 mm to ⌀100 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 149 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |