Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 13

Tube connector ⌀140 mm to ⌀93 mm in STL 3D format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tubing adapter ⌀140 mm to ⌀100 mm in STL 3D format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 19.9 mm. The ends feature an external fillet to facilitate the connection of the two tubes.

Straight tube reducer ⌀140 mm to ⌀106 mm in STL 3D format. Length of this reducer is 200 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 60 mm as well. The ends have a fillet on the inside to ease the connection.

Inline fitting ⌀140 mm to ⌀100 mm in STL 3D format. Total length of this reducer is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tube junction ⌀140 mm to ⌀100 mm in STL format. Length of this junction is 110 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube connector ⌀140 mm to ⌀115 mm in STL 3D format. Final length of this adapter is 58 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 19 mm. The ends are raw.

Diameter adapter ⌀140 mm to ⌀110 mm in STL format. Final length of this junction is 158 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 28 mm. The ends have no fillet.

Inline sleeve ⌀140 mm to ⌀111 mm in STL format. Final length of this sleeve is 133 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 28 mm. The ends are raw.

Straight tube reducer ⌀140 mm to ⌀111 mm in STL format. Total length of this fitting is 158 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 28 mm. The ends have no fillet.

Tubing reducer ⌀140 mm to ⌀102 mm in STL 3D format. Total length of this sleeve is 30 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Straight sleeve ⌀140 mm to ⌀75 mm in STL 3D format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Inline tube adapter ⌀140 mm to ⌀93 mm in STL format. Final length of this sleeve is 85 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Straight sleeve ⌀140 mm to ⌀75 mm in STL format. Total length of this sleeve is 20 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 7 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 7 mm as well. The ends are not rounded.

Straight tube connector ⌀141 mm to ⌀131 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The ends are not rounded.

Inline tube coupler ⌀142 mm to ⌀100 mm in STL 3D format. Total length of this reducer is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Inline tube reducer ⌀144 mm to ⌀101 mm in STL format. Final length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends are not rounded.

Straight tube connector ⌀144 mm to ⌀125 mm in STL format. Final length of this junction is 85 mm. The larger-diameter tube has a thickness of 5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.

Straight tube coupler ⌀145 mm to ⌀122 mm in STL 3D format. Length of this coupler is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Tube adapter ⌀145 mm to ⌀80 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tubing adapter ⌀146 mm to ⌀38 mm in STL 3D format. Length of this connector is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 35 mm as well. The ends have no fillet.

Tube reducer ⌀146 mm to ⌀109 mm in STL 3D format. Final length of this reducer is 220 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are raw.

Straight tube connector ⌀147 mm to ⌀49.9 mm in STL format. Total length of this connector is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 40 mm. The axes of the tubes are offset by 48 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Tube junction ⌀147 mm to ⌀75 mm in STL format. Final length of this junction is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 40 mm. The axes of the tubes are offset by 35.9 mm. The ends have no fillet.

Inline sleeve ⌀147 mm to ⌀134 mm in STL format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Tube fitting ⌀147 mm to ⌀138 mm in STL format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Inline tube reducer ⌀147 mm to ⌀75 mm in STL 3D format. Length of this coupler is 260 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 90 mm, the smaller one of 50 mm. The two axes of the tubes are offset by 35.9 mm. The ends are rounded to facilitate the connection of the two tubes.

Tubing adapter ⌀147 mm to ⌀107 mm in STL 3D format. Length of this junction is 150 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded to ease the connection.

Inline tube coupler ⌀147 mm to ⌀112 mm in STL 3D format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have a fillet on the outside to ease the connection.

Diameter adapter ⌀147 mm to ⌀105 mm in STL 3D format. Final length of this reducer is 125 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 40 mm. The ends are rounded on the outside.

Straight tube coupler ⌀148 mm to ⌀110 mm in STL format. Length of this junction is 200 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 60 mm. The ends have a fillet to facilitate the connection of the two tubes.