Custom Tubing adapter STL 3D file ⌀ 135–115 mm (Length: 75 mm) 📦#9630
Generation date: 2026-06-24
3D model download
Free- inline-tube-adapter-lenA25mm-d_model9630-nb0_dd{id}.stl : 1.4 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 25 mm (≃0.98 in) |
| #2 | side A outer diameter | 135 mm (≃5 5/16 in) |
| #3 | side A thickness | 3 mm (≃1/8 in) |
| #4 | side B length | 25 mm (≃0.98 in) |
| #5 | side B outer diameter | 115 mm (≃4.53 in) |
| #6 | side B thickness | 3 mm (≃1/8 in) |
| #7 | transition length | 25 mm (≃0.98 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 129 mm (≃5.08 in) |
| inner diameter (side B) | 109 mm (≃4.29 in) |
| total length | 75 mm (≃2 15/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 130–107 mm (Length: 75 mm) (📦 #5048)
1 object(s) - format STL
Inline tube adapter ⌀130 mm to ⌀107 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 130 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 107 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 135–100 mm (Length: 60 mm) (📦 #8606)
1 object(s) - format STL
Inline tube adapter ⌀135 mm to ⌀100 mm in STL 3D format. Total length of this fitting is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 150–131 mm (Length: 75 mm) (📦 #3019)
1 object(s) - format STL
Inline tube coupler ⌀150 mm to ⌀131 mm in STL 3D format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 123–110 mm (Length: 55 mm) (📦 #8993)
1 object(s) - format STL
Straight tubing adapter ⌀123 mm to ⌀110 mm in STL 3D format. Final length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 147–134 mm (Length: 75 mm) (📦 #3029)
1 object(s) - format STL
Inline sleeve ⌀147 mm to ⌀134 mm in STL format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 134 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 121–110 mm (Length: 55 mm) (📦 #8991)
1 object(s) - format STL
Straight tube adapter ⌀121 mm to ⌀110 mm in STL format. Length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 121 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 158–118 mm (Length: 90 mm) (📦 #2318)
1 object(s) - format STL
Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 118 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 113–98 mm (Length: 75 mm) (📦 #7394)
1 object(s) - format STL
Tube adapter ⌀113 mm to ⌀98 mm in STL format. Length of this reducer is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 113 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 98 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 116–100 mm (Length: 90 mm) (📦 #2153)
1 object(s) - format STL
Straight tube fitting ⌀116 mm to ⌀100 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 123–92 mm (Length: 75 mm) (📦 #7395)
1 object(s) - format STL
Inline fitting ⌀123 mm to ⌀92 mm in STL format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 92 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 147–138 mm (Length: 75 mm) (📦 #3044)
1 object(s) - format STL
Tube fitting ⌀147 mm to ⌀138 mm in STL format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 138 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 123–93 mm (Length: 70 mm) (📦 #7013)
1 object(s) - format STL
Straight tube reducer ⌀123 mm to ⌀93 mm in STL format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 156–100 mm (Length: 60 mm) (📦 #8692)
1 object(s) - format STL
Tube junction ⌀156 mm to ⌀100 mm in STL format. Total length of this fitting is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 156 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 116–104 mm (Length: 55 mm) (📦 #8643)
1 object(s) - format STL
Tube adapter ⌀116 mm to ⌀104 mm in STL format. Final length of this connector is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 104 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 123–92 mm (Length: 70 mm) (📦 #7012)
1 object(s) - format STL
Tube fitting ⌀123 mm to ⌀92 mm in STL 3D format. Length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 92 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 117–93 mm (Length: 70 mm) (📦 #7091)
1 object(s) - format STL
Inline tube junction ⌀117 mm to ⌀93 mm in STL format. Length of this junction is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 117 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 126–91 mm (Length: 71 mm) (📦 #5568)
1 object(s) - format STL
Diameter adapter ⌀126 mm to ⌀91 mm in STL 3D format. Total length of this sleeve is 71 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 27 mm, the smaller one of 31 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 27 | mm |
| side A outer diameter | 126 | mm |
| side A thickness | 3 | mm |
| side B length | 31 | mm |
| side B outer diameter | 91 | mm |
| side B thickness | 3 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 123–94 mm (Length: 59 mm) (📦 #6984)
1 object(s) - format STL
Tube coupler ⌀123 mm to ⌀94 mm in STL format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 24 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 24 | mm |
| side B outer diameter | 94 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 141–131 mm (Length: 45 mm) (📦 #8590)
1 object(s) - format STL
Straight tube connector ⌀141 mm to ⌀131 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 141 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 123–93 mm (Length: 59 mm) (📦 #6945)
1 object(s) - format STL
Inline tube junction ⌀123 mm to ⌀93 mm in STL 3D format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 24 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 24 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 152–110 mm (Length: 110 mm) (📦 #8480)
1 object(s) - format STL
Inline tube coupler ⌀152 mm to ⌀110 mm in STL format. Length of this connector is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 152 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 154–137 mm (Length: 60 mm) (📦 #9642)
1 object(s) - format STL
Inline tube adapter ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 137 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 122–92 mm (Length: 50 mm) (📦 #6939)
1 object(s) - format STL
Tube connector ⌀122 mm to ⌀92 mm in STL format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 122 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 92 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 140–120 mm (Length: 60 mm) (📦 #1207)
1 object(s) - format STL
Tube fitting ⌀140 mm to ⌀120 mm in STL 3D format. Final length of this sleeve is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 127–100 mm (Length: 45 mm) (📦 #5943)
1 object(s) - format STL
Straight sleeve ⌀127 mm to ⌀100 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 127 | mm |
| side A thickness | 2.5 | mm |
| side B length | 20 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 157–117 mm (Length: 65 mm) (📦 #2290)
1 object(s) - format STL
Tube connector ⌀157 mm to ⌀117 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 157 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 117 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 145–122 mm (Length: 60 mm) (📦 #6624)
1 object(s) - format STL
Straight tube coupler ⌀145 mm to ⌀122 mm in STL 3D format. Length of this coupler is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 145 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 122 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 137–80 mm (Length: 75 mm) (📦 #9197)
1 object(s) - format STL
Inline tubing adapter ⌀137 mm to ⌀80 mm in STL format. Final length of this fitting is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 137 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 80 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |