Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 20

Tube fitting ⌀63 mm to ⌀58 mm in STL 3D format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Diameter adapter ⌀63 mm to ⌀36 mm in STL format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline tube junction ⌀63 mm to ⌀41 mm in STL format. Total length of this reducer is 78 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 18 mm. The ends have a fillet.

Straight tube coupler ⌀63 mm to ⌀59 mm in STL 3D format. Length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tube adapter ⌀64 mm to ⌀49 mm in STL format. Length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Tube reducer ⌀64 mm to ⌀49 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 4 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The ends have no fillet.

Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the inside to ease the connection.

Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this junction is 166 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends are raw.

Tube adapter ⌀64 mm to ⌀60 mm in STL format. Length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube adapter ⌀64 mm to ⌀54 mm in STL 3D format. Total length of this adapter is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are rounded on the inside.

Inline tube junction ⌀64 mm to ⌀40 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Straight tube connector ⌀64 mm to ⌀42 mm in STL 3D format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 50 mm. The ends are not rounded.

Inline tube adapter ⌀64 mm to ⌀54 mm in STL 3D format. Length of this coupler is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Straight tube reducer ⌀64 mm to ⌀54 mm in STL 3D format. Final length of this reducer is 26 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 7 mm, the smaller one of 14 mm. The ends feature an internal fillet to ease the connection.

Straight tube fitting ⌀65 mm to ⌀47 mm in STL format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube junction ⌀65 mm to ⌀57 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 30 mm. The ends have no fillet.

Tubing reducer ⌀65 mm to ⌀63 mm in STL 3D format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube coupler ⌀65 mm to ⌀63 mm in STL 3D format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube adapter ⌀65 mm to ⌀60 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 30 mm. The ends are raw.

Tube adapter ⌀65 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 70 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.

Inline sleeve ⌀65 mm to ⌀55 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Straight tube adapter ⌀65 mm to ⌀49 mm in STL format. Total length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends have no fillet.

Tube reducer ⌀65 mm to ⌀49 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight tube adapter ⌀65 mm to ⌀17 mm in STL format. Length of this fitting is 55 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 25 mm. The ends are raw.

Inline tube adapter ⌀65 mm to ⌀50 mm in STL format. Total length of this fitting is 40 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 10 mm. The ends are raw.

Inline sleeve ⌀65 mm to ⌀44 mm in STL format. Final length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 20 mm. The axes of the tubes are offset by 5 mm. The ends have a fillet on the outside to ease the connection.

Straight tube adapter ⌀66 mm to ⌀41 mm in STL format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 45 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Diameter adapter ⌀66 mm to ⌀40 mm in STL format. Total length of this coupler is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends are not rounded.

Straight tube reducer ⌀66 mm to ⌀44 mm in STL 3D format. Final length of this connector is 85 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are raw.

Straight tube fitting ⌀66 mm to ⌀34 mm in STL 3D format. Total length of this sleeve is 70 mm. The larger-diameter tube has a thickness of 10 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are not rounded.