?>

Tube adapter STL file ⌀ 64–32 mm (Length: 166 mm) 📦#2979

STL Download STL
Create a new model:
from scratch search for a model
Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this junction is 166 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends are raw.
Generation date: 2025-11-02
3D Model Tube adapter STL file ⌀ 64–32 mm (Length: 166 mm)

3D model download

Free
  • inline-tube-adapter-lenA80mm-d_model2979-nb0_dd{id}.stl : 2.4 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 80 mm
#2 side A outer diameter 64 mm
#3 side A thickness 3 mm
#4 side B length 60 mm
#5 side B outer diameter 32 mm
#6 side B thickness 3 mm
#7 transition length 26 mm
#8 axis offset 0 mm
#9 ends fillet no fillet
Metadata Value
inner diameter (side A) 58 mm
inner diameter (side B) 26 mm
total length 166 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 43–31 mm (Length: 120 mm) (📦 #2849)

1 object(s) - format STL
Tube adapter STL file ⌀ 43–31 mm (Length: 120 mm)
Tube adapter ⌀43 mm to ⌀31 mm in STL format. Final length of this coupler is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 43 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 31 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm) (📦 #1493)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm)
Inline fitting ⌀56 mm to ⌀50 mm in STL format. Length of this adapter is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 56 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm) (📦 #2313)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm)
Inline tube junction ⌀77 mm to ⌀57 mm in STL format. Length of this fitting is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 77 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 57 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)

1 object(s) - format STL
Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm)
Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 45 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 65 mm
side B thickness 3 mm
transition length 21 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 103–90 mm (Length: 150 mm) (📦 #1767)

1 object(s) - format STL
Tube adapter STL file ⌀ 103–90 mm (Length: 150 mm)
Inline tube coupler ⌀103 mm to ⌀90 mm in STL format. Final length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 50 mm. The ends are not rounded.
Parameter Value Unit
side A length 70 mm
side A outer diameter 103 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 53–35 mm (Length: 100 mm) (📦 #2985)

1 object(s) - format STL
Tube adapter STL file ⌀ 53–35 mm (Length: 100 mm)
Straight tube fitting ⌀53 mm to ⌀35 mm in STL 3D format. Length of this adapter is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are not rounded.
Parameter Value Unit
side A length 45 mm
side A outer diameter 53 mm
side A thickness 4 mm
side B length 40 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 58–45 mm (Length: 100 mm) (📦 #2970)

1 object(s) - format STL
Tube adapter STL file ⌀ 58–45 mm (Length: 100 mm)
Tubing reducer ⌀58 mm to ⌀45 mm in STL format. Total length of this junction is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are raw.
Parameter Value Unit
side A length 45 mm
side A outer diameter 58 mm
side A thickness 4 mm
side B length 40 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 53–45 mm (Length: 100 mm) (📦 #2971)

1 object(s) - format STL
Tube adapter STL file ⌀ 53–45 mm (Length: 100 mm)
Straight tube fitting ⌀53 mm to ⌀45 mm in STL 3D format. Final length of this reducer is 100 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are raw.
Parameter Value Unit
side A length 45 mm
side A outer diameter 53 mm
side A thickness 4 mm
side B length 40 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 58–49 mm (Length: 100 mm) (📦 #2984)

1 object(s) - format STL
Tubing adapter STL file ⌀ 58–49 mm (Length: 100 mm)
Tubing reducer ⌀58 mm to ⌀49 mm in STL format. Length of this junction is 100 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are not rounded.
Parameter Value Unit
side A length 45 mm
side A outer diameter 58 mm
side A thickness 4 mm
side B length 40 mm
side B outer diameter 49 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 58–50 mm (Length: 100 mm) (📦 #3005)

1 object(s) - format STL
Tubing adapter STL file ⌀ 58–50 mm (Length: 100 mm)
Straight tube reducer ⌀58 mm to ⌀50 mm in STL format. Total length of this fitting is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends have no fillet.
Parameter Value Unit
side A length 45 mm
side A outer diameter 58 mm
side A thickness 4 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)

1 object(s) - format STL
Tube adapter STL file ⌀ 60–45 mm (Length: 100 mm)
Straight tube fitting ⌀60 mm to ⌀45 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 60 mm
side A thickness 4 mm
side B length 30 mm
side B outer diameter 45 mm
side B thickness 4 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm)
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm)
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 1 mm
ends fillet fillet on th...

Tubing adapter STL file ⌀ 44–24 mm (Length: 110 mm) (📦 #3008)

1 object(s) - format STL
Tubing adapter STL file ⌀ 44–24 mm (Length: 110 mm)
Inline tube coupler ⌀44 mm to ⌀24 mm in STL 3D format. Total length of this fitting is 110 mm. The thickness of the tubes is identical: 2.1 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 44 mm
side A thickness 2.1 mm
side B length 40 mm
side B outer diameter 24 mm
side B thickness 2.1 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 40–24 mm (Length: 110 mm) (📦 #3009)

1 object(s) - format STL
Tubing adapter STL file ⌀ 40–24 mm (Length: 110 mm)
Straight tube adapter ⌀40 mm to ⌀24 mm in STL 3D format. Total length of this adapter is 110 mm. The thickness of the tubes is identical: 2.1 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 40 mm
side A thickness 2.1 mm
side B length 40 mm
side B outer diameter 24 mm
side B thickness 2.1 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 104–90 mm (Length: 180 mm) (📦 #1766)

1 object(s) - format STL
Tube adapter STL file ⌀ 104–90 mm (Length: 180 mm)
Straight tube connector ⌀104 mm to ⌀90 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 70 mm. The ends have no fillet.
Parameter Value Unit
side A length 80 mm
side A outer diameter 104 mm
side A thickness 4 mm
side B length 70 mm
side B outer diameter 90 mm
side B thickness 4 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm)
Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 15 mm
axis offset 2.4 mm
ends fillet no fillet

Tube adapter STL file ⌀ 102–90 mm (Length: 150 mm) (📦 #1768)

1 object(s) - format STL
Tube adapter STL file ⌀ 102–90 mm (Length: 150 mm)
Diameter adapter ⌀102 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 50 mm. The ends have no fillet.
Parameter Value Unit
side A length 70 mm
side A outer diameter 102 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 40–20 mm (Length: 110 mm) (📦 #3010)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 40–20 mm (Length: 110 mm)
Inline fitting ⌀40 mm to ⌀20 mm in STL format. Final length of this reducer is 110 mm. The larger-diameter tube has a thickness of 2 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.2 mm and a length of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 40 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 20 mm
side B thickness 2.2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm)
Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 60–35 mm (Length: 240 mm) (📦 #2996)

1 object(s) - format STL
Tube adapter STL file ⌀ 60–35 mm (Length: 240 mm)
Straight tube fitting ⌀60 mm to ⌀35 mm in STL 3D format. Length of this adapter is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 80 mm as well. The ends are raw.
Parameter Value Unit
side A length 80 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 80 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 80 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)

1 object(s) - format STL
Tube adapter STL file ⌀ 60–40 mm (Length: 85 mm)
Inline tube adapter ⌀60 mm to ⌀40 mm in STL 3D format. Final length of this coupler is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 1 mm. The ends feature an external fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 40 mm
side B thickness 3 mm
transition length 5 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm)
Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 86–81 mm (Length: 111 mm)
Inline tube coupler ⌀86 mm to ⌀81 mm in STL format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 46 mm
side A outer diameter 86 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 81 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 33–10 mm (Length: 95 mm) (📦 #1522)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 33–10 mm (Length: 95 mm)
Straight tube coupler ⌀33 mm to ⌀10 mm in STL 3D format. Length of this connector is 95 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 33 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 10 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm) (📦 #1856)

1 object(s) - format STL
Tube adapter STL file ⌀ 40–35 mm (Length: 130 mm)
Inline tube reducer ⌀40 mm to ⌀35 mm in STL 3D format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 40 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 35 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 101 mm)
Straight tube adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 101 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 46 mm, the smaller one of 45 mm. The axes of the tubes are off-center by 2.4 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 10 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm)
Inline tube coupler ⌀80 mm to ⌀75 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The axes of the tubes are offset by 2.4 mm. The ends have a fillet on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 10 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm)
Tube junction ⌀100 mm to ⌀60 mm in STL format. Total length of this junction is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends feature an external fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 60 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm)
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet