Custom Tubing adapter STL 3D file ⌀ 62–32 mm (Length: 124 mm) 📦#6512
Generation date: 2026-01-12
3D model download
Free- inline-tube-adapter-lenA64mm-d_model6512-nb0_dd{id}.stl : 2.3 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 64 mm (≃2.52 in) |
| #2 | side A outer diameter | 62 mm (≃2 7/16 in) |
| #3 | side A thickness | 3 mm (≃1/8 in) |
| #4 | side B length | 40 mm (≃1 9/16 in) |
| #5 | side B outer diameter | 32 mm (≃1 1/4 in) |
| #6 | side B thickness | 3 mm (≃1/8 in) |
| #7 | transition length | 20 mm (≃0.79 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 56 mm (≃2.20 in) |
| inner diameter (side B) | 26 mm (≃1.02 in) |
| total length | 124 mm (≃4 7/8 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tubing adapter STL file ⌀ 63–43 mm (Length: 120 mm) (📦 #5796)
1 object(s) - format STL
Inline tube junction ⌀63 mm to ⌀43 mm in STL 3D format. Length of this junction is 120 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 63 | mm |
| side A thickness | 2.5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 43 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 60–30 mm (Length: 140 mm) (📦 #4786)
1 object(s) - format STL
Tube reducer ⌀60 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 140 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 2.5 | mm |
| side B length | 60 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 51–48 mm (Length: 110 mm) (📦 #8084)
1 object(s) - format STL
Inline tubing adapter ⌀51 mm to ⌀48 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 51 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 48 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 51–38 mm (Length: 100 mm) (📦 #10135)
1 object(s) - format STL
Straight tubing adapter ⌀51 mm to ⌀38 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 51 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 38 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 67–41 mm (Length: 105 mm) (📦 #5070)
1 object(s) - format STL
Inline sleeve ⌀67 mm to ⌀41 mm in STL format. Length of this junction is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 45 mm. The two axes of the tubes are offset by 1 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 67 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 1 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 64–32 mm (Length: 166 mm) (📦 #2979)
1 object(s) - format STL
Inline tubing adapter ⌀64 mm to ⌀32 mm in STL 3D format. Total length of this junction is 166 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 80 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 3 | mm |
| side B length | 60 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 26 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 71–41 mm (Length: 105 mm) (📦 #5071)
1 object(s) - format STL
Tube junction ⌀71 mm to ⌀41 mm in STL 3D format. Total length of this reducer is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 1 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 71 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 41 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 1 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 53–35 mm (Length: 100 mm) (📦 #2985)
1 object(s) - format STL
Straight tube fitting ⌀53 mm to ⌀35 mm in STL 3D format. Length of this adapter is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 53 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 35 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 77–30 mm (Length: 110 mm) (📦 #7683)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀30 mm in STL format. Length of this connector is 110 mm. The larger-diameter tube has a thickness of 2.4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 2.5 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 51–32 mm (Length: 90 mm) (📦 #4605)
1 object(s) - format STL
Inline tubing adapter ⌀51 mm to ⌀32 mm in STL 3D format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 51 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 77–31 mm (Length: 120 mm) (📦 #7703)
1 object(s) - format STL
Tube reducer ⌀77 mm to ⌀31 mm in STL format. Length of this connector is 120 mm. The larger-diameter tube has a thickness of 2.3 mm and a sleeve length of 80 mm. The smaller-diameter tube has a thickness of 2.4 mm and a length of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 80 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 31 | mm |
| side B thickness | 2.4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 50–32 mm (Length: 90 mm) (📦 #4381)
1 object(s) - format STL
Tubing adapter ⌀50 mm to ⌀32 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 58–45 mm (Length: 100 mm) (📦 #2970)
1 object(s) - format STL
Tubing reducer ⌀58 mm to ⌀45 mm in STL format. Total length of this junction is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 58 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 49–32 mm (Length: 90 mm) (📦 #4378)
1 object(s) - format STL
Straight tube fitting ⌀49 mm to ⌀32 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 49 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 53–45 mm (Length: 100 mm) (📦 #2971)
1 object(s) - format STL
Straight tube fitting ⌀53 mm to ⌀45 mm in STL 3D format. Final length of this reducer is 100 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 53 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 47–32 mm (Length: 90 mm) (📦 #4377)
1 object(s) - format STL
Inline tube junction ⌀47 mm to ⌀32 mm in STL format. Final length of this sleeve is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 47 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 32 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 50–40 mm (Length: 90 mm) (📦 #3871)
1 object(s) - format STL
Tube junction ⌀50 mm to ⌀40 mm in STL format. Final length of this coupler is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 77–31 mm (Length: 110 mm) (📦 #7686)
1 object(s) - format STL
Straight tube connector ⌀77 mm to ⌀31 mm in STL 3D format. Total length of this connector is 110 mm. The larger-diameter tube has a thickness of 2.3 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2.4 mm and a length of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 31 | mm |
| side B thickness | 2.4 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 62–50 mm (Length: 95 mm) (📦 #7925)
1 object(s) - format STL
Straight tube reducer ⌀62 mm to ⌀50 mm in STL 3D format. Final length of this fitting is 95 mm. The larger-diameter tube has a thickness of 2.9 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The two axes of the tubes are offset by 0.1 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 62 | mm |
| side A thickness | 2.9 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 15 | mm |
| axis offset | 0.1 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 65–57 mm (Length: 90 mm) (📦 #3460)
1 object(s) - format STL
Tube junction ⌀65 mm to ⌀57 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 65 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 57 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 50–20 mm (Length: 80 mm) (📦 #8580)
1 object(s) - format STL
Inline tube coupler ⌀50 mm to ⌀20 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 20 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 50 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 20 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 58–49 mm (Length: 100 mm) (📦 #2984)
1 object(s) - format STL
Tubing reducer ⌀58 mm to ⌀49 mm in STL format. Length of this junction is 100 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 58 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 58–50 mm (Length: 100 mm) (📦 #3005)
1 object(s) - format STL
Straight tube reducer ⌀58 mm to ⌀50 mm in STL format. Total length of this fitting is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 58 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 80–46 mm (Length: 160 mm) (📦 #3941)
1 object(s) - format STL
Inline sleeve ⌀80 mm to ⌀46 mm in STL 3D format. Length of this fitting is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 80 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 60 | mm |
| side B outer diameter | 46 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 56–25 mm (Length: 120 mm) (📦 #4126)
1 object(s) - format STL
Inline tube reducer ⌀56 mm to ⌀25 mm in STL format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 56 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 25 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)
1 object(s) - format STL
Straight tube fitting ⌀60 mm to ⌀45 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 43–31 mm (Length: 120 mm) (📦 #2849)
1 object(s) - format STL
Tube adapter ⌀43 mm to ⌀31 mm in STL format. Final length of this coupler is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 43 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 31 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 65–60 mm (Length: 90 mm) (📦 #7216)
1 object(s) - format STL
Tube adapter ⌀65 mm to ⌀60 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 65 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |