O-ring ID 200 × CS 10 mm 📦#1053

3D model of O-ring with dimensions ID (inner diameter) 200 mm by thickness 10 mm. Outer diameter (OD) resulting is 220 mm.

Generation date: 2025-05-28

3D model download

Free

Download format: zip : 1.5 Mo (1 file(s))

o-ring-ID200mm-CS10mm_model105_model1053-nb0_dd{id}.stl : 1.5 Mo

STL Mesh quality : not defined

License: CC0 - Creative commons

(no copyright - public domain)

Values for this model

This model was generated by the O-ring template, with the following values:

	Template parameter	Value	Unit	Label
#1	inner diameter (ID)	200	mm	ID
#2	cross section (CS)	10	mm	CS

Representation of the parameters

See details

To determine the outer diameter (OD), apply the formula OD = ID + 2×CS.

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring

O-ring ID 150 × CS 10 mm (📦 #1240)

1 object(s) - format STL

3D model O-ring ID 150 × CS 10 mm

3D model in STL format of sealing ring with Internal diameter 150 mm by CS (cross section) 10 mm. Outer diameter (OD, for outer diameter) is therefore 170 mm.

Parameter	Value	Unit
inner diameter (ID)	150	mm
cross section (CS)	10	mm

O-ring ID 200 × CS 8 mm (📦 #1172)

1 object(s) - format STL

3D model O-ring ID 200 × CS 8 mm

STL file of O-ring with dimensions ID (inner diameter) 200 mm by section thickness 8 mm. The outer diameter resulting is therefore 216 mm.

Parameter	Value	Unit
inner diameter (ID)	200	mm
cross section (CS)	8	mm

O-ring ID 200 × CS 6 mm (📦 #1173)

1 object(s) - format STL

3D model O-ring ID 200 × CS 6 mm

Model of O-ring with Inner diameter (ID) 200 mm by CS (cross section) 6 mm. Final diameter resulting is 212 mm.

Parameter	Value	Unit
inner diameter (ID)	200	mm
cross section (CS)	6	mm

O-ring ID 150 × CS 5 mm (📦 #1107)

1 object(s) - format STL

3D model O-ring ID 150 × CS 5 mm

3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.

Parameter	Value	Unit
inner diameter (ID)	150	mm
cross section (CS)	5	mm

O-ring ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL

3D model O-ring ID 100 × CS 5 mm

Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.

Parameter	Value	Unit
inner diameter (ID)	100	mm
cross section (CS)	5	mm

O-ring ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL

3D model O-ring ID 110 × CS 4 mm

Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4 mm. Final diameter resulting corresponds to 118 mm.

Parameter	Value	Unit
inner diameter (ID)	110	mm
cross section (CS)	4	mm

O-ring ID 40 × CS 6 mm (📦 #1051)

1 object(s) - format STL

3D model O-ring ID 40 × CS 6 mm

3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6 mm. The outer diameter is therefore 52 mm.

Parameter	Value	Unit
inner diameter (ID)	40	mm
cross section (CS)	6	mm

O-ring ID 48 × CS 5 mm (📦 #1373)

1 object(s) - format STL

3D model O-ring ID 48 × CS 5 mm

3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.

Parameter	Value	Unit
inner diameter (ID)	48	mm
cross section (CS)	5	mm

O-ring ID 45 × CS 5 mm (📦 #1212)

1 object(s) - format STL

3D model O-ring ID 45 × CS 5 mm

3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.

Parameter	Value	Unit
inner diameter (ID)	45	mm
cross section (CS)	5	mm

O-ring ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL

3D model O-ring ID 90 × CS 3.5 mm

STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.

Parameter	Value	Unit
inner diameter (ID)	90	mm
cross section (CS)	3.5	mm

O-ring ID 10 × CS 6.3 mm (📦 #1052)

1 object(s) - format STL

3D model O-ring ID 10 × CS 6.3 mm

STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3 mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.

Parameter	Value	Unit
inner diameter (ID)	10	mm
cross section (CS)	6.3	mm

O-ring ID 150 × CS 2.5 mm (📦 #1347)

1 object(s) - format STL

3D model O-ring ID 150 × CS 2.5 mm

3D model in STL format of O-ring with Inner diameter 150 mm by CS (cross section) 2.5 mm. The outer diameter resulting is 155 mm.

Parameter	Value	Unit
inner diameter (ID)	150	mm
cross section (CS)	2.5	mm

O-ring ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL

3D model O-ring ID 70 × CS 3.5 mm

3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5 mm. The outer diameter resulting is 77 mm.

Parameter	Value	Unit
inner diameter (ID)	70	mm
cross section (CS)	3.5	mm

O-ring ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL

3D model O-ring ID 40 × CS 4 mm

STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.

Parameter	Value	Unit
inner diameter (ID)	40	mm
cross section (CS)	4	mm

O-ring ID 18 × CS 4.6 mm (📦 #1216)

1 object(s) - format STL

3D model O-ring ID 18 × CS 4.6 mm

File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6 mm. The outer diameter is 27.2 mm.

Parameter	Value	Unit
inner diameter (ID)	18	mm
cross section (CS)	4.6	mm

O-ring ID 30 × CS 4 mm (📦 #1023)

1 object(s) - format STL

3D model O-ring ID 30 × CS 4 mm

3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.

Parameter	Value	Unit
inner diameter (ID)	30	mm
cross section (CS)	4	mm

O-ring ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL

3D model O-ring ID 80 × CS 2.5 mm

3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5 mm. Outer diameter (OD) is therefore 85 mm.

Parameter	Value	Unit
inner diameter (ID)	80	mm
cross section (CS)	2.5	mm

O-ring ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL

3D model O-ring ID 17 × CS 4 mm

File of sealing ring with Internal diameter 17 mm by CS 4 mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.

Parameter	Value	Unit
inner diameter (ID)	17	mm
cross section (CS)	4	mm

O-ring ID 200 × CS 1 mm (📦 #1050)

1 object(s) - format STL

3D model O-ring ID 200 × CS 1 mm

3D model in STL format of circular seal with Internal diameter 200 mm by section thickness 1 mm. External diameter (OD) is therefore 202 mm.

Parameter	Value	Unit
inner diameter (ID)	200	mm
cross section (CS)	1	mm

O-ring ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL

3D model O-ring ID 50 × CS 2.5 mm

3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.

Parameter	Value	Unit
inner diameter (ID)	50	mm
cross section (CS)	2.5	mm

O-ring ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL

3D model O-ring ID 30 × CS 3 mm

STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.

Parameter	Value	Unit
inner diameter (ID)	30	mm
cross section (CS)	3	mm

O-ring ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL

3D model O-ring ID 26 × CS 3 mm

3D file of rubber ring with dimensions ID 26 mm × thickness 3 mm. The outer diameter resulting is therefore 32 mm.

Parameter	Value	Unit
inner diameter (ID)	26	mm
cross section (CS)	3	mm

O-ring ID 25 × CS 3 mm (📦 #1045)

1 object(s) - format STL

3D model O-ring ID 25 × CS 3 mm

Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3 mm. External diameter (OD) resulting corresponds to 31 mm.

Parameter	Value	Unit
inner diameter (ID)	25	mm
cross section (CS)	3	mm

O-ring ID 37.75 × CS 2.62 mm (📦 #1034)

1 object(s) - format STL

3D model O-ring ID 37.75 × CS 2.62 mm

3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.

Parameter	Value	Unit
inner diameter (ID)	37...	mm
cross section (CS)	2.62	mm

O-ring ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL

3D model O-ring ID 24 × CS 3 mm

3D model of rubber ring with Inner diameter 24 mm × CS 3 mm. Outer diameter (OD) corresponds to 30 mm.

Parameter	Value	Unit
inner diameter (ID)	24	mm
cross section (CS)	3	mm

O-ring ID 24 × CS 2.8 mm (📦 #1389)

1 object(s) - format STL

3D model O-ring ID 24 × CS 2.8 mm

3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8 mm. Final diameter resulting corresponds to 29.6 mm.

Parameter	Value	Unit
inner diameter (ID)	24	mm
cross section (CS)	2.8	mm

O-ring ID 26 × CS 2.5 mm (📦 #1437)

1 object(s) - format STL

3D model O-ring ID 26 × CS 2.5 mm

STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5 mm. Final diameter is therefore 31 mm.

Parameter	Value	Unit
inner diameter (ID)	26	mm
cross section (CS)	2.5	mm

O-ring ID 25 × CS 2.4 mm (📦 #1390)

1 object(s) - format STL

3D model O-ring ID 25 × CS 2.4 mm

3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4 mm. The outer diameter corresponds to 29.8 mm.

Parameter	Value	Unit
inner diameter (ID)	25	mm
cross section (CS)	2.4	mm

O-ring ID 40 × CS 2 mm (📦 #1054)

1 object(s) - format STL

3D model O-ring ID 40 × CS 2 mm

STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2 mm. External diameter (OD) resulting is therefore 44 mm.

Parameter	Value	Unit
inner diameter (ID)	40	mm
cross section (CS)	2	mm