?>

Custom O-ring STL file ID 147.5 × CS 5.8 mm 📦#3250

STL Download STL 1
Create a new model:
from scratch search for a model
Model of rubber ring with Internal diameter 147.5 mm / thickness 5.8  mm. Outer diameter (OD, for outer diameter) corresponds to 159.1 mm.
Generation date: 2025-11-13
3D Model O-ring STL file ID 147.5 × CS 5.8 mm

3D model download

Free
  • o-ring-ID147.5mm-CS5.8mm_model_model3250-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 147.5 mm (≃5 13/16 in)
#2 cross section (CS) 5.8 mm (≃0.23 in)
Metadata Value
outer diameter (OD) 159.1 mm (≃6 1/4 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 145 × CS 5.3 mm (📦 #3089)

1 object(s) - format STL
O-ring STL 3D file ID 145 × CS 5.3 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 145 mm by thickness 5.3  mm. Final diameter is 155.6 mm.
Parameter Value Unit
inner diameter (ID) 145 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 150 × CS 5.3 mm (📦 #3071)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 5.3 mm
STL model of O-ring with Inner diameter 150 mm × CS 5.3  mm. The outer diameter resulting is 160.6 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5.3 mm

O'ring STL file ID 150 × CS 5 mm (📦 #1107)

1 object(s) - format STL
o'ring STL file ID 150 × CS 5 mm
3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5 mm

O-ring STL file ID 120 × CS 5 mm (📦 #1543)

1 object(s) - format STL
O-ring STL file ID 120 × CS 5 mm
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5  mm. Outer diameter (OD) resulting is 130 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 5 mm

O-ring STL file ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL
O-ring STL file ID 100 × CS 5 mm
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 5 mm

O'ring STL 3D file ID 200 × CS 6 mm (📦 #1173)

1 object(s) - format STL
o'ring STL 3D file ID 200 × CS 6 mm
Model of O-ring with Inner diameter (ID) 200 mm by CS (cross section) 6  mm. Final diameter resulting is 212 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 6 mm

O-ring STL file ID 96 × CS 5.3 mm (📦 #3088)

1 object(s) - format STL
O-ring STL file ID 96 × CS 5.3 mm
Model of rubber ring with Internal diameter 96 mm / thickness 5.3  mm. External diameter (OD) is 106.6 mm.
Parameter Value Unit
inner diameter (ID) 96 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL
O-ring STL 3D file ID 110 × CS 4 mm
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4  mm. Final diameter resulting corresponds to 118 mm.
Parameter Value Unit
inner diameter (ID) 110 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 134 × CS 8.4 mm (📦 #3267)

1 object(s) - format STL
O-ring STL 3D file ID 134 × CS 8.4 mm
File of rubber ring with Inner diameter (ID) 134 mm / CS 8.4  mm. The outer diameter corresponds to 150.8 mm.
Parameter Value Unit
inner diameter (ID) 134 mm
cross section (CS) 8.4 mm

O-ring STL 3D file ID 90 × CS 5 mm (📦 #2677)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 5 mm
3D model of rubber ring with Inner diameter 90 mm by CS (cross section) 5  mm. Outer diameter (OD) resulting corresponds to 100 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 88.9 × CS 5 mm (📦 #3281)

1 object(s) - format STL
O-ring STL 3D file ID 88.9 × CS 5 mm
3D file in STL format of circular seal with dimensions ID 88.9 mm by CS 5  mm. External diameter (OD) resulting corresponds to 98.9 mm.
Parameter Value Unit
inner diameter (ID) 88.9 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 80 × CS 6 mm (📦 #2636)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 6 mm
STL file of rubber ring with dimensions Inner diameter (ID) 80 mm × CS (cross section) 6  mm. External diameter (OD) resulting is 92 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 6 mm

O'ring STL file ID 80 × CS 5.3 mm (📦 #3247)

1 object(s) - format STL
o'ring STL file ID 80 × CS 5.3 mm
Model of O-ring with dimensions Inner diameter (ID) 80 mm × section thickness 5.3  mm. External diameter (OD) is 90.6 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5.3 mm

O-ring STL file ID 78.5 × CS 5.8 mm (📦 #3251)

1 object(s) - format STL
O-ring STL file ID 78.5 × CS 5.8 mm
STL file of rubber ring with dimensions Internal diameter (ID) 78.5 mm by CS (cross section) 5.8  mm. Outer diameter (OD) resulting corresponds to 90.1 mm.
Parameter Value Unit
inner diameter (ID) 78.5 mm
cross section (CS) 5.8 mm

O-ring STL 3D file ID 91 × CS 4 mm (📦 #2989)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 4 mm
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4  mm. Outer diameter (OD) resulting is therefore 99 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)

1 object(s) - format STL
O-ring STL 3D file ID 78 × CS 6 mm
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6  mm. External diameter (OD) resulting corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 78 mm
cross section (CS) 6 mm

O-ring STL file ID 101 × CS 3.5 mm (📦 #3484)

1 object(s) - format STL
O-ring STL file ID 101 × CS 3.5 mm
3D model in STL format of rubber ring with Inner diameter 101 mm × section thickness 3.5  mm. External diameter (OD) resulting is 108 mm.
Parameter Value Unit
inner diameter (ID) 101 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O-ring STL file ID 90 × CS 4 mm (📦 #2183)

1 object(s) - format STL
O-ring STL file ID 90 × CS 4 mm
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4  mm. Outer diameter (OD, for outer diameter) is 98 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 4 mm

O'ring STL file ID 200 × CS 8 mm (📦 #1172)

1 object(s) - format STL
o'ring STL file ID 200 × CS 8 mm
STL file of O-ring with dimensions ID (inner diameter) 200 mm by section thickness 8  mm. The outer diameter resulting is therefore 216 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 8 mm

O-ring STL file ID 144.7 × CS 2.6 mm (📦 #2005)

1 object(s) - format STL
O-ring STL file ID 144.7 × CS 2.6 mm
File of rubber ring with Internal diameter 144.7 mm × CS (cross section) 2.6  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 149.9 mm.
Parameter Value Unit
inner diameter (ID) 144.7 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 75 × CS 5.3 mm (📦 #3246)

1 object(s) - format STL
O-ring STL 3D file ID 75 × CS 5.3 mm
STL file of rubber ring with Internal diameter 75 mm × thickness 5.3  mm. Outer diameter (OD) is therefore 85.6 mm.
Parameter Value Unit
inner diameter (ID) 75 mm
cross section (CS) 5.3 mm

O'ring STL file ID 150 × CS 2.5 mm (📦 #1347)

1 object(s) - format STL
o'ring STL file ID 150 × CS 2.5 mm
3D model in STL format of O-ring with Inner diameter 150 mm by CS (cross section) 2.5  mm. The outer diameter resulting is 155 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 158 × CS 2.5 mm (📦 #3885)

1 object(s) - format STL
O-ring STL 3D file ID 158 × CS 2.5 mm
3D model in STL format of O-ring with dimensions Internal diameter (ID) 158 mm × thickness 2.5  mm. Outer diameter (OD, for outer diameter) is therefore 163 mm.
Parameter Value Unit
inner diameter (ID) 158 mm
cross section (CS) 2.5 mm

O-ring STL file ID 160 × CS 2.5 mm (📦 #3880)

1 object(s) - format STL
O-ring STL file ID 160 × CS 2.5 mm
Model of sealing ring with Inner diameter 160 mm by thickness 2.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 165 mm.
Parameter Value Unit
inner diameter (ID) 160 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 3.5 mm
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 3.5 mm

O'ring STL file ID 100 × CS 3 mm (📦 #3802)

1 object(s) - format STL
o'ring STL file ID 100 × CS 3 mm
STL model of sealing ring with ID (inner diameter) 100 mm / section thickness 3  mm. Outer diameter (OD) resulting is therefore 106 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 3 mm

O-ring STL file ID 69 × CS 6.5 mm (📦 #3815)

1 object(s) - format STL
O-ring STL file ID 69 × CS 6.5 mm
3D model in STL format of sealing ring with dimensions ID 69 mm × section thickness 6.5  mm. Final diameter resulting is 82 mm.
Parameter Value Unit
inner diameter (ID) 69 mm
cross section (CS) 6.5 mm

O'ring STL file ID 91 × CS 3 mm (📦 #2986)

1 object(s) - format STL
o'ring STL file ID 91 × CS 3 mm
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3  mm. The outer diameter corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 3 mm

O-ring STL file ID 67 × CS 7 mm (📦 #1995)

1 object(s) - format STL
O-ring STL file ID 67 × CS 7 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7  mm. Outer diameter (OD) resulting corresponds to 81 mm.
Parameter Value Unit
inner diameter (ID) 67 mm
cross section (CS) 7 mm