?>

O-ring STL 3D file ID 96 × CS 5.3 mm 📦#3088

STL Download STL
Create a new model:
from scratch search for a model
Model of rubber ring with Internal diameter 96 mm / thickness 5.3  mm. External diameter (OD) is 106.6 mm.
Generation date: 2025-11-06
3D Model O-ring STL 3D file ID 96 × CS 5.3 mm

3D model download

Free
  • o-ring-ID96mm-CS5.3mm_model308_model3088-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 96 mm
#2 cross section (CS) 5.3 mm
Metadata Value
outer diameter (OD) 106.6 mm
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL file ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL
O-ring STL file ID 100 × CS 5 mm
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 5 mm

O-ring STL file ID 90 × CS 5 mm (📦 #2677)

1 object(s) - format STL
O-ring STL file ID 90 × CS 5 mm
3D model of rubber ring with Inner diameter 90 mm by CS (cross section) 5  mm. Outer diameter (OD) resulting corresponds to 100 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 5 mm

O-ring STL file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 80 × CS 6 mm (📦 #2636)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 6 mm
STL file of rubber ring with dimensions Inner diameter (ID) 80 mm × CS (cross section) 6  mm. External diameter (OD) resulting is 92 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)

1 object(s) - format STL
O-ring STL 3D file ID 78 × CS 6 mm
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6  mm. External diameter (OD) resulting corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 78 mm
cross section (CS) 6 mm

O-ring STL file ID 120 × CS 5 mm (📦 #1543)

1 object(s) - format STL
O-ring STL file ID 120 × CS 5 mm
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5  mm. Outer diameter (OD) resulting is 130 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 5 mm

O-ring STL file ID 91 × CS 4 mm (📦 #2989)

1 object(s) - format STL
O-ring STL file ID 91 × CS 4 mm
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4  mm. Outer diameter (OD) resulting is therefore 99 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4 mm

O-ring STL file ID 90 × CS 4 mm (📦 #2183)

1 object(s) - format STL
O-ring STL file ID 90 × CS 4 mm
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4  mm. Outer diameter (OD, for outer diameter) is 98 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 4 mm

O-ring STL file ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL
O-ring STL file ID 110 × CS 4 mm
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4  mm. Final diameter resulting corresponds to 118 mm.
Parameter Value Unit
inner diameter (ID) 110 mm
cross section (CS) 4 mm

O-ring STL file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL file ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL
O-ring STL file ID 90 × CS 3.5 mm
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5 mm
Model of circular seal with ID (inner diameter) 50 mm / thickness 5  mm. Final diameter corresponds to 60 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5 mm

O-ring STL file ID 48 × CS 5 mm (📦 #1373)

1 object(s) - format STL
O-ring STL file ID 48 × CS 5 mm
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5  mm. External diameter (OD) resulting is 58 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 67 × CS 7 mm (📦 #1995)

1 object(s) - format STL
O-ring STL 3D file ID 67 × CS 7 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7  mm. Outer diameter (OD) resulting corresponds to 81 mm.
Parameter Value Unit
inner diameter (ID) 67 mm
cross section (CS) 7 mm

O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL
O-ring STL file ID 70 × CS 3.5 mm
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5  mm. The outer diameter resulting is 77 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 145 × CS 5.3 mm (📦 #3089)

1 object(s) - format STL
O-ring STL 3D file ID 145 × CS 5.3 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 145 mm by thickness 5.3  mm. Final diameter is 155.6 mm.
Parameter Value Unit
inner diameter (ID) 145 mm
cross section (CS) 5.3 mm

O-ring STL file ID 45 × CS 5 mm (📦 #1212)

1 object(s) - format STL
O-ring STL file ID 45 × CS 5 mm
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5  mm. The outer diameter is 55 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 5 mm

O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)

1 object(s) - format STL
O-ring STL file ID 43.8 × CS 5.4 mm
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4  mm. Final diameter is therefore 54.6 mm.
Parameter Value Unit
inner diameter (ID) 43.8 mm
cross section (CS) 5.4 mm

O-ring STL 3D file ID 91 × CS 3 mm (📦 #2986)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 3 mm
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3  mm. The outer diameter corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 3 mm

O-ring STL file ID 60 × CS 7 mm (📦 #1598)

1 object(s) - format STL
O-ring STL file ID 60 × CS 7 mm
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7  mm. Final diameter resulting is therefore 74 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 150 × CS 5.3 mm (📦 #3071)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 5.3 mm
STL model of O-ring with Inner diameter 150 mm × CS 5.3  mm. The outer diameter resulting is 160.6 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)

1 object(s) - format STL
O-ring STL 3D file ID 84 × CS 3 mm
File of sealing ring with dimensions Inner diameter 84 mm / CS 3  mm. Final diameter corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 150 × CS 5 mm (📦 #1107)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 5 mm
3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)

1 object(s) - format STL
O-ring STL 3D file ID 40 × CS 6 mm
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6  mm. The outer diameter is therefore 52 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 6 mm

O-ring STL file ID 73.2 × CS 7.7 mm (📦 #2089)

1 object(s) - format STL
O-ring STL file ID 73.2 × CS 7.7 mm
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7  mm. Outer diameter (OD) resulting is therefore 88.6 mm.
Parameter Value Unit
inner diameter (ID) 73.2 mm
cross section (CS) 7.7 mm

O-ring STL file ID 50 × CS 3.6 mm (📦 #3144)

1 object(s) - format STL
O-ring STL file ID 50 × CS 3.6 mm
3D file in STL format of O-ring with ID (inner diameter) 50 mm by CS 3.6  mm. External diameter (OD) resulting is therefore 57.2 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 35 × CS 5 mm (📦 #2716)

1 object(s) - format STL
O-ring STL 3D file ID 35 × CS 5 mm
3D file in STL format of sealing ring with dimensions Inner diameter 35 mm × thickness 5  mm. Final diameter resulting is 45 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 4 mm
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4  mm. External diameter (OD) is therefore 50 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 47 × CS 3.6 mm (📦 #3146)

1 object(s) - format STL
O-ring STL 3D file ID 47 × CS 3.6 mm
3D model of rubber ring with Internal diameter (ID) 47 mm by section thickness 3.6  mm. The outer diameter resulting is therefore 54.2 mm.
Parameter Value Unit
inner diameter (ID) 47 mm
cross section (CS) 3.6 mm

O-ring STL file ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL
O-ring STL file ID 40 × CS 4 mm
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 4 mm