O-ring STL 3D file ID 67 × CS 7 mm 📦#1995
Generation date: 2025-09-25
3D model download
Free- o-ring-ID67mm-CS7mm_model1995-_model1995-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 67 mm |
| #2 | cross section (CS) | 7 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL file ID 60 × CS 7 mm (📦 #1598)
1 object(s) - format STL
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7 mm. Final diameter resulting is therefore 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 73.2 × CS 7.7 mm (📦 #2089)
1 object(s) - format STL
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7 mm. Outer diameter (OD) resulting is therefore 88.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 73.2 | mm |
| cross section (CS) | 7.7 | mm |
O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6 mm. External diameter (OD) resulting corresponds to 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 78 | mm |
| cross section (CS) | 6 | mm |
O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6 mm. The outer diameter is therefore 52 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 6 | mm |
O-ring STL file ID 28 × CS 7 mm (📦 #1677)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7 mm. The outer diameter is 42 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 32 × CS 8 mm (📦 #1520)
1 object(s) - format STL
3D model of O-ring with dimensions Internal diameter (ID) 32 mm × section thickness 8 mm. External diameter (OD) resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 8 | mm |
O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)
1 object(s) - format STL
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4 mm. Final diameter is therefore 54.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43.8 | mm |
| cross section (CS) | 5.4 | mm |
O-ring STL file ID 25 × CS 8 mm (📦 #2229)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Inner diameter (ID) 25 mm by section thickness 8 mm. External diameter (OD) resulting corresponds to 41 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 8 | mm |
O-ring STL file ID 80 × CS 5 mm (📦 #1547)
1 object(s) - format STL
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5 mm. Final diameter resulting is therefore 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)
1 object(s) - format STL
Model of circular seal with ID (inner diameter) 50 mm / thickness 5 mm. Final diameter corresponds to 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 48 × CS 5 mm (📦 #1373)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 45 × CS 5 mm (📦 #1212)
1 object(s) - format STL
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 100 × CS 5 mm (📦 #1171)
1 object(s) - format STL
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 100 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 10 × CS 6.3 mm (📦 #1052)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3 mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 6.3 | mm |
O-ring STL 3D file ID 76 × CS 9.5 mm (📦 #1637)
1 object(s) - format STL
STL model of circular seal with dimensions Inner diameter 76 mm by CS 9.5 mm. External diameter (OD) resulting corresponds to 95 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 76 | mm |
| cross section (CS) | 9.5 | mm |
O-ring STL 3D file ID 20 × CS 5 mm (📦 #2006)
1 object(s) - format STL
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5 mm. Outer diameter (OD) is therefore 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 120 × CS 5 mm (📦 #1543)
1 object(s) - format STL
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5 mm. Outer diameter (OD) resulting is 130 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 120 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 70 × CS 4 mm (📦 #1681)
1 object(s) - format STL
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4 mm. External diameter (OD) is therefore 78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 10 × CS 5 mm (📦 #1546)
1 object(s) - format STL
STL file of circular seal with Internal diameter (ID) 10 mm / CS 5 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 18 × CS 4.6 mm (📦 #1216)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6 mm. The outer diameter is 27.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 4.6 | mm |
O-ring STL file ID 90 × CS 4 mm (📦 #2183)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4 mm. Outer diameter (OD, for outer diameter) is 98 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)
1 object(s) - format STL
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4 mm. External diameter (OD) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 40 × CS 4 mm (📦 #1055)
1 object(s) - format STL
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 32 × CS 4 mm (📦 #2202)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4 mm. Outer diameter (OD) corresponds to 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 110 × CS 4 mm (📦 #1399)
1 object(s) - format STL
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4 mm. Final diameter resulting corresponds to 118 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 110 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)
1 object(s) - format STL
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5 mm. The outer diameter resulting is 77 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL file ID 90 × CS 3.5 mm (📦 #1328)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6 mm. Final diameter corresponds to 43.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.6 | mm |