O-ring STL file ID 73.2 × CS 7.7 mm 📦#2089
Generation date: 2025-09-29
3D model download
Free- o-ring-ID73.2mm-CS7.7mm_model2_model2089-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 73.2 mm |
| #2 | cross section (CS) | 7.7 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 67 × CS 7 mm (📦 #1995)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7 mm. Outer diameter (OD) resulting corresponds to 81 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 67 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 60 × CS 7 mm (📦 #1598)
1 object(s) - format STL
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7 mm. Final diameter resulting is therefore 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6 mm. External diameter (OD) resulting corresponds to 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 78 | mm |
| cross section (CS) | 6 | mm |
O-ring STL 3D file ID 32 × CS 8 mm (📦 #1520)
1 object(s) - format STL
3D model of O-ring with dimensions Internal diameter (ID) 32 mm × section thickness 8 mm. External diameter (OD) resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 8 | mm |
O-ring STL 3D file ID 76 × CS 9.5 mm (📦 #1637)
1 object(s) - format STL
STL model of circular seal with dimensions Inner diameter 76 mm by CS 9.5 mm. External diameter (OD) resulting corresponds to 95 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 76 | mm |
| cross section (CS) | 9.5 | mm |
O-ring STL file ID 28 × CS 7 mm (📦 #1677)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7 mm. The outer diameter is 42 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 25 × CS 8 mm (📦 #2229)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Inner diameter (ID) 25 mm by section thickness 8 mm. External diameter (OD) resulting corresponds to 41 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 8 | mm |
O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6 mm. The outer diameter is therefore 52 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 6 | mm |
O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)
1 object(s) - format STL
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4 mm. Final diameter is therefore 54.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43.8 | mm |
| cross section (CS) | 5.4 | mm |
O-ring STL file ID 80 × CS 5 mm (📦 #1547)
1 object(s) - format STL
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5 mm. Final diameter resulting is therefore 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)
1 object(s) - format STL
Model of circular seal with ID (inner diameter) 50 mm / thickness 5 mm. Final diameter corresponds to 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 48 × CS 5 mm (📦 #1373)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 100 × CS 5 mm (📦 #1171)
1 object(s) - format STL
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 100 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 45 × CS 5 mm (📦 #1212)
1 object(s) - format STL
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 10 × CS 6.3 mm (📦 #1052)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3 mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 6.3 | mm |
O-ring STL file ID 120 × CS 5 mm (📦 #1543)
1 object(s) - format STL
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5 mm. Outer diameter (OD) resulting is 130 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 120 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 20 × CS 5 mm (📦 #2006)
1 object(s) - format STL
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5 mm. Outer diameter (OD) is therefore 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 70 × CS 4 mm (📦 #1681)
1 object(s) - format STL
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4 mm. External diameter (OD) is therefore 78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 10 × CS 5 mm (📦 #1546)
1 object(s) - format STL
STL file of circular seal with Internal diameter (ID) 10 mm / CS 5 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 90 × CS 4 mm (📦 #2183)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4 mm. Outer diameter (OD, for outer diameter) is 98 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 18 × CS 4.6 mm (📦 #1216)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6 mm. The outer diameter is 27.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 4.6 | mm |
O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)
1 object(s) - format STL
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4 mm. External diameter (OD) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 150 × CS 10 mm (📦 #1240)
1 object(s) - format STL
3D model in STL format of sealing ring with Internal diameter 150 mm by CS (cross section) 10 mm. Outer diameter (OD, for outer diameter) is therefore 170 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 150 | mm |
| cross section (CS) | 10 | mm |
O-ring STL file ID 40 × CS 4 mm (📦 #1055)
1 object(s) - format STL
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 110 × CS 4 mm (📦 #1399)
1 object(s) - format STL
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4 mm. Final diameter resulting corresponds to 118 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 110 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 32 × CS 4 mm (📦 #2202)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4 mm. Outer diameter (OD) corresponds to 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 150 × CS 5 mm (📦 #1107)
1 object(s) - format STL
3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 150 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)
1 object(s) - format STL
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5 mm. The outer diameter resulting is 77 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 90 × CS 3.5 mm (📦 #1328)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 3.5 | mm |