?>

O-ring STL 3D file ID 10 × CS 6.3 mm 📦#1052

STL Download STL
Create a new model:
from scratch search for a model
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3  mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
Generation date: 2025-05-28
3D Model O-ring STL 3D file ID 10 × CS 6.3 mm

3D model download

Free
  • o-ring-ID10mm-CS6.3mm_model105_model1052-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 10 mm
#2 cross section (CS) 6.3 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL file ID 28 × CS 7 mm (📦 #1677)

1 object(s) - format STL
O-ring STL file ID 28 × CS 7 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7  mm. The outer diameter is 42 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)

1 object(s) - format STL
O-ring STL 3D file ID 40 × CS 6 mm
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6  mm. The outer diameter is therefore 52 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 10 × CS 5 mm (📦 #1546)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 5 mm
STL file of circular seal with Internal diameter (ID) 10 mm / CS 5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 20 × CS 5 mm (📦 #2006)

1 object(s) - format STL
O-ring STL 3D file ID 20 × CS 5 mm
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5  mm. Outer diameter (OD) is therefore 30 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 5 mm

O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)

1 object(s) - format STL
O-ring STL file ID 43.8 × CS 5.4 mm
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4  mm. Final diameter is therefore 54.6 mm.
Parameter Value Unit
inner diameter (ID) 43.8 mm
cross section (CS) 5.4 mm

O-ring STL 3D file ID 18 × CS 4.6 mm (📦 #1216)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 4.6 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6  mm. The outer diameter is 27.2 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 4.6 mm

O-ring STL file ID 25 × CS 8 mm (📦 #2229)

1 object(s) - format STL
O-ring STL file ID 25 × CS 8 mm
3D file in STL format of O-ring with dimensions Inner diameter (ID) 25 mm by section thickness 8  mm. External diameter (OD) resulting corresponds to 41 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 8 mm

O-ring STL 3D file ID 32 × CS 8 mm (📦 #1520)

1 object(s) - format STL
O-ring STL 3D file ID 32 × CS 8 mm
3D model of O-ring with dimensions Internal diameter (ID) 32 mm × section thickness 8  mm. External diameter (OD) resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 8 mm

O-ring STL file ID 45 × CS 5 mm (📦 #1212)

1 object(s) - format STL
O-ring STL file ID 45 × CS 5 mm
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5  mm. The outer diameter is 55 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 5 mm

O-ring STL file ID 48 × CS 5 mm (📦 #1373)

1 object(s) - format STL
O-ring STL file ID 48 × CS 5 mm
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5  mm. External diameter (OD) resulting is 58 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5 mm
Model of circular seal with ID (inner diameter) 50 mm / thickness 5  mm. Final diameter corresponds to 60 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5 mm

O-ring STL file ID 60 × CS 7 mm (📦 #1598)

1 object(s) - format STL
O-ring STL file ID 60 × CS 7 mm
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7  mm. Final diameter resulting is therefore 74 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 7 mm

O-ring STL file ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL
O-ring STL file ID 17 × CS 4 mm
File of sealing ring with Internal diameter 17 mm by CS 4  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)

1 object(s) - format STL
O-ring STL 3D file ID 30 × CS 4 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4  mm. Final diameter is 38 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 67 × CS 7 mm (📦 #1995)

1 object(s) - format STL
O-ring STL 3D file ID 67 × CS 7 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7  mm. Outer diameter (OD) resulting corresponds to 81 mm.
Parameter Value Unit
inner diameter (ID) 67 mm
cross section (CS) 7 mm

O-ring STL file ID 32 × CS 4 mm (📦 #2202)

1 object(s) - format STL
O-ring STL file ID 32 × CS 4 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4  mm. Outer diameter (OD) corresponds to 40 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 4 mm

O-ring STL file ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL
O-ring STL file ID 40 × CS 4 mm
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 4 mm
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4  mm. External diameter (OD) is therefore 50 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)

1 object(s) - format STL
O-ring STL 3D file ID 78 × CS 6 mm
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6  mm. External diameter (OD) resulting corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 78 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL 3D file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.6 mm
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6  mm. Final diameter corresponds to 43.2 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.6 mm

O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)

1 object(s) - format STL
O-ring STL file ID 31 × CS 3.5 mm
STL model of rubber ring with Internal diameter 31 mm × CS 3.5  mm. External diameter (OD) resulting corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 31 mm
cross section (CS) 3.5 mm

O-ring STL file ID 73.2 × CS 7.7 mm (📦 #2089)

1 object(s) - format STL
O-ring STL file ID 73.2 × CS 7.7 mm
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7  mm. Outer diameter (OD) resulting is therefore 88.6 mm.
Parameter Value Unit
inner diameter (ID) 73.2 mm
cross section (CS) 7.7 mm

O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.5 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.6 mm
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.5 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5  mm. The outer diameter resulting corresponds to 49 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.5 mm

O-ring STL file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 3 mm
File of rubber ring with ID 13 mm by thickness 3  mm. Outer diameter (OD) resulting corresponds to 19 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 3 mm

O-ring STL file ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 24 × CS 3 mm
3D model of rubber ring with Inner diameter 24 mm × CS 3  mm. Outer diameter (OD) corresponds to 30 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 3 mm