?>

Custom O-ring STL file ID 16 × CS 5 mm 📦#3629

STL Download STL
Create a new model:
from scratch search for a model
3D model in STL format of circular seal with dimensions Inner diameter (ID) 16 mm by section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 26 mm.
Generation date: 2025-11-25
3D Model O-ring STL file ID 16 × CS 5 mm

3D model download

Free
  • o-ring-ID16mm-CS5mm_model3629-_model3629-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 16 mm (≃5/8 in)
#2 cross section (CS) 5 mm (≃3/16 in)
Metadata Value
outer diameter (OD) 26 mm (≃1.02 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 20 × CS 5 mm (📦 #2006)

1 object(s) - format STL
O-ring STL 3D file ID 20 × CS 5 mm
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5  mm. Outer diameter (OD) is therefore 30 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 5 mm

O'ring STL 3D file ID 10 × CS 5 mm (📦 #1546)

1 object(s) - format STL
o'ring STL 3D file ID 10 × CS 5 mm
STL file of circular seal with Internal diameter (ID) 10 mm / CS 5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 5 mm

O-ring STL file ID 18 × CS 4.6 mm (📦 #1216)

1 object(s) - format STL
O-ring STL file ID 18 × CS 4.6 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6  mm. The outer diameter is 27.2 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 4.6 mm

O-ring STL 3D file ID 9.6 × CS 5.3 mm (📦 #3087)

1 object(s) - format STL
O-ring STL 3D file ID 9.6 × CS 5.3 mm
3D file in STL format of O-ring with ID (inner diameter) 9.6 mm by thickness 5.3  mm. The outer diameter resulting corresponds to 20.2 mm.
Parameter Value Unit
inner diameter (ID) 9.6 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 9.4 × CS 5.3 mm (📦 #3113)

1 object(s) - format STL
O-ring STL 3D file ID 9.4 × CS 5.3 mm
STL model of O-ring with dimensions ID (inner diameter) 9.4 mm × section thickness 5.3  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 5.3 mm

O'ring STL 3D file ID 9.4 × CS 4.6 mm (📦 #3115)

1 object(s) - format STL
o'ring STL 3D file ID 9.4 × CS 4.6 mm
3D file in STL format of O-ring with ID (inner diameter) 9.4 mm × CS 4.6  mm. The outer diameter resulting is 18.6 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 4.6 mm

O-ring STL file ID 35 × CS 5 mm (📦 #2716)

1 object(s) - format STL
O-ring STL file ID 35 × CS 5 mm
3D file in STL format of sealing ring with dimensions Inner diameter 35 mm × thickness 5  mm. Final diameter resulting is 45 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL
O-ring STL 3D file ID 17 × CS 4 mm
File of sealing ring with Internal diameter 17 mm by CS 4  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 4 mm

O'ring STL 3D file ID 13 × CS 4 mm (📦 #3149)

1 object(s) - format STL
o'ring STL 3D file ID 13 × CS 4 mm
File of rubber ring with Internal diameter (ID) 13 mm / thickness 4  mm. Outer diameter (OD, for outer diameter) resulting is 21 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 4 mm

O'ring STL file ID 12 × CS 4 mm (📦 #3645)

1 object(s) - format STL
o'ring STL file ID 12 × CS 4 mm
Model of sealing ring with dimensions Internal diameter (ID) 12 mm / CS 4  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 4 mm

O-ring STL file ID 11 × CS 4 mm (📦 #3610)

1 object(s) - format STL
O-ring STL file ID 11 × CS 4 mm
STL file of O-ring with dimensions Internal diameter 11 mm by section thickness 4  mm. Outer diameter (OD) resulting is 19 mm.
Parameter Value Unit
inner diameter (ID) 11 mm
cross section (CS) 4 mm

O-ring STL file ID 10 × CS 4 mm (📦 #3611)

1 object(s) - format STL
O-ring STL file ID 10 × CS 4 mm
3D model in STL format of rubber ring with Inner diameter 10 mm by CS (cross section) 4  mm. Final diameter resulting is therefore 18 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 4 mm

O-ring STL file ID 9.4 × CS 4 mm (📦 #3117)

1 object(s) - format STL
O-ring STL file ID 9.4 × CS 4 mm
3D file of sealing ring with ID 9.4 mm × CS 4  mm. Outer diameter (OD) resulting is 17.4 mm.
Parameter Value Unit
inner diameter (ID) 9.4 mm
cross section (CS) 4 mm

O-ring STL file ID 40 × CS 5 mm (📦 #3841)

1 object(s) - format STL
O-ring STL file ID 40 × CS 5 mm
3D file in STL format of circular seal with dimensions Inner diameter (ID) 40 mm × CS (cross section) 5  mm. External diameter (OD) resulting is 50 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 5 mm

O-ring STL file ID 30 × CS 4 mm (📦 #1023)

1 object(s) - format STL
O-ring STL file ID 30 × CS 4 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4  mm. Final diameter is 38 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 32 × CS 4 mm (📦 #2202)

1 object(s) - format STL
O-ring STL 3D file ID 32 × CS 4 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4  mm. Outer diameter (OD) corresponds to 40 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 45 × CS 5 mm (📦 #1212)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 5 mm
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5  mm. The outer diameter is 55 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 5 mm

O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)

1 object(s) - format STL
O-ring STL file ID 43.8 × CS 5.4 mm
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4  mm. Final diameter is therefore 54.6 mm.
Parameter Value Unit
inner diameter (ID) 43.8 mm
cross section (CS) 5.4 mm

O'ring STL 3D file ID 11 × CS 3.7 mm (📦 #3120)

1 object(s) - format STL
o'ring STL 3D file ID 11 × CS 3.7 mm
STL file of sealing ring with dimensions Inner diameter 11 mm / CS (cross section) 3.7  mm. External diameter (OD) resulting is 18.4 mm.
Parameter Value Unit
inner diameter (ID) 11 mm
cross section (CS) 3.7 mm

O-ring STL 3D file ID 10 × CS 6.3 mm (📦 #1052)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 6.3 mm
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3  mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 6.3 mm

O-ring STL file ID 48 × CS 5 mm (📦 #1373)

1 object(s) - format STL
O-ring STL file ID 48 × CS 5 mm
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5  mm. External diameter (OD) resulting is 58 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 5 mm

O-ring STL file ID 40 × CS 6 mm (📦 #1051)

1 object(s) - format STL
O-ring STL file ID 40 × CS 6 mm
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6  mm. The outer diameter is therefore 52 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 6 mm

O'ring STL file ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL
o'ring STL file ID 40 × CS 4 mm
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 4 mm

O-ring STL file ID 17.4 × CS 3.5 mm (📦 #3505)

1 object(s) - format STL
O-ring STL file ID 17.4 × CS 3.5 mm
STL model of sealing ring with ID 17.4 mm / CS (cross section) 3.5  mm. The outer diameter is 24.4 mm.
Parameter Value Unit
inner diameter (ID) 17.4 mm
cross section (CS) 3.5 mm

O'ring STL 3D file ID 28.5 × CS 3.6 mm (📦 #3249)

1 object(s) - format STL
o'ring STL 3D file ID 28.5 × CS 3.6 mm
3D model of O-ring with Internal diameter 28.5 mm / CS (cross section) 3.6  mm. Outer diameter (OD, for outer diameter) is 35.7 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5 mm
Model of circular seal with ID (inner diameter) 50 mm / thickness 5  mm. Final diameter corresponds to 60 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5 mm

O-ring STL file ID 42 × CS 4 mm (📦 #1500)

1 object(s) - format STL
O-ring STL file ID 42 × CS 4 mm
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4  mm. External diameter (OD) is therefore 50 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 50 × CS 5.3 mm (📦 #3248)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5.3 mm
3D file in STL format of circular seal with ID (inner diameter) 50 mm × CS 5.3  mm. Outer diameter (OD, for outer diameter) is therefore 60.6 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm