?>

O-ring STL 3D file ID 20 × CS 5 mm 📦#2006

STL Download STL
Create a new model:
from scratch search for a model
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5  mm. Outer diameter (OD) is therefore 30 mm.
Generation date: 2025-09-26
3D Model O-ring STL 3D file ID 20 × CS 5 mm

3D model download

Free
  • o-ring-ID20mm-CS5mm_model2006-_model2006-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 20 mm
#2 cross section (CS) 5 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 18 × CS 4.6 mm (📦 #1216)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 4.6 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6  mm. The outer diameter is 27.2 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 4.6 mm

O-ring STL 3D file ID 10 × CS 5 mm (📦 #1546)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 5 mm
STL file of circular seal with Internal diameter (ID) 10 mm / CS 5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 5 mm

O-ring STL file ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL
O-ring STL file ID 17 × CS 4 mm
File of sealing ring with Internal diameter 17 mm by CS 4  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 4 mm

O-ring STL file ID 45 × CS 5 mm (📦 #1212)

1 object(s) - format STL
O-ring STL file ID 45 × CS 5 mm
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5  mm. The outer diameter is 55 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 5 mm

O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)

1 object(s) - format STL
O-ring STL file ID 43.8 × CS 5.4 mm
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4  mm. Final diameter is therefore 54.6 mm.
Parameter Value Unit
inner diameter (ID) 43.8 mm
cross section (CS) 5.4 mm

O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)

1 object(s) - format STL
O-ring STL 3D file ID 30 × CS 4 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4  mm. Final diameter is 38 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 4 mm

O-ring STL file ID 32 × CS 4 mm (📦 #2202)

1 object(s) - format STL
O-ring STL file ID 32 × CS 4 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4  mm. Outer diameter (OD) corresponds to 40 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 4 mm

O-ring STL file ID 48 × CS 5 mm (📦 #1373)

1 object(s) - format STL
O-ring STL file ID 48 × CS 5 mm
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5  mm. External diameter (OD) resulting is 58 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5 mm
Model of circular seal with ID (inner diameter) 50 mm / thickness 5  mm. Final diameter corresponds to 60 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)

1 object(s) - format STL
O-ring STL 3D file ID 40 × CS 6 mm
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6  mm. The outer diameter is therefore 52 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 6 mm

O-ring STL file ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL
O-ring STL file ID 40 × CS 4 mm
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 4 mm
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4  mm. External diameter (OD) is therefore 50 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 10 × CS 6.3 mm (📦 #1052)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 6.3 mm
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3  mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 6.3 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL 3D file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.6 mm
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6  mm. Final diameter corresponds to 43.2 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.6 mm

O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)

1 object(s) - format STL
O-ring STL file ID 31 × CS 3.5 mm
STL model of rubber ring with Internal diameter 31 mm × CS 3.5  mm. External diameter (OD) resulting corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 31 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.5 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.6 mm
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.5 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5  mm. The outer diameter resulting corresponds to 49 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.5 mm

O-ring STL file ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 24 × CS 3 mm
3D model of rubber ring with Inner diameter 24 mm × CS 3  mm. Outer diameter (OD) corresponds to 30 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 3 mm

O-ring STL file ID 25 × CS 3 mm (📦 #1045)

1 object(s) - format STL
O-ring STL file ID 25 × CS 3 mm
Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3  mm. External diameter (OD) resulting corresponds to 31 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 3 mm

O-ring STL file ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL
O-ring STL file ID 26 × CS 3 mm
3D file of rubber ring with dimensions ID 26 mm × thickness 3  mm. The outer diameter resulting is therefore 32 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 3 mm
File of rubber ring with ID 13 mm by thickness 3  mm. Outer diameter (OD) resulting corresponds to 19 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 3 mm

O-ring STL file ID 28 × CS 7 mm (📦 #1677)

1 object(s) - format STL
O-ring STL file ID 28 × CS 7 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7  mm. The outer diameter is 42 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 7 mm

O-ring STL file ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL
O-ring STL file ID 30 × CS 3 mm
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3  mm. The outer diameter is therefore 36 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 3 mm

O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)

1 object(s) - format STL
O-ring STL file ID 24 × CS 2.8 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8  mm. Final diameter resulting corresponds to 29.6 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 2.8 mm

O-ring STL file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 50 × CS 3 mm (📦 #2430)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 3 mm
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3  mm. Outer diameter (OD) is therefore 56 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 16 × CS 2.62 mm (📦 #1043)

1 object(s) - format STL
O-ring STL 3D file ID 16 × CS 2.62 mm
STL file of circular seal with ID (inner diameter) 16 mm / section thickness 2.62  mm. Final diameter corresponds to 21.24 mm.
Parameter Value Unit
inner diameter (ID) 16 mm
cross section (CS) 2.62 mm