O-ring STL 3D file ID 10 × CS 5 mm 📦#1546
Generation date: 2025-09-03
3D model download
Free- o-ring-ID10mm-CS5mm_model1546-_model1546-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 10 mm |
| #2 | cross section (CS) | 5 mm |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 20 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 20 × CS 5 mm (📦 #2006)
1 object(s) - format STL
STL model of O-ring with ID (inner diameter) 20 mm × CS (cross section) 5 mm. Outer diameter (OD) is therefore 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 18 × CS 4.6 mm (📦 #1216)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6 mm. The outer diameter is 27.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 4.6 | mm |
O-ring STL 3D file ID 35 × CS 5 mm (📦 #2716)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions Inner diameter 35 mm × thickness 5 mm. Final diameter resulting is 45 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 17 × CS 4 mm (📦 #1262)
1 object(s) - format STL
File of sealing ring with Internal diameter 17 mm by CS 4 mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 10 × CS 6.3 mm (📦 #1052)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 10 mm / CS 6.3 mm. Outer diameter (OD, for outer diameter) resulting is therefore 22.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 6.3 | mm |
O-ring STL file ID 32 × CS 4 mm (📦 #2202)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4 mm. Outer diameter (OD) corresponds to 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 45 × CS 5 mm (📦 #1212)
1 object(s) - format STL
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)
1 object(s) - format STL
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4 mm. Final diameter is therefore 54.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43.8 | mm |
| cross section (CS) | 5.4 | mm |
O-ring STL file ID 48 × CS 5 mm (📦 #1373)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 40 × CS 6 mm (📦 #1051)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6 mm. The outer diameter is therefore 52 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 6 | mm |
O-ring STL file ID 40 × CS 4 mm (📦 #1055)
1 object(s) - format STL
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6 mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30.5 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)
1 object(s) - format STL
Model of circular seal with ID (inner diameter) 50 mm / thickness 5 mm. Final diameter corresponds to 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)
1 object(s) - format STL
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4 mm. External diameter (OD) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)
1 object(s) - format STL
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5 mm. Outer diameter (OD) resulting is 35.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 31 mm × CS 3.5 mm. External diameter (OD) resulting corresponds to 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 31 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6 mm. Final diameter corresponds to 43.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5 mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 9 × CS 3 mm (📦 #2784)
1 object(s) - format STL
3D model of O-ring with dimensions Internal diameter 9 mm / thickness 3 mm. External diameter (OD) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 9 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5 mm. The outer diameter resulting corresponds to 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)
1 object(s) - format STL
File of rubber ring with ID 13 mm by thickness 3 mm. Outer diameter (OD) resulting corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 24 × CS 3 mm (📦 #1046)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of rubber ring with Inner diameter 24 mm × CS 3 mm. Outer diameter (OD) corresponds to 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 25 × CS 3 mm (📦 #1045)
1 object(s) - format STL
Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3 mm. External diameter (OD) resulting corresponds to 31 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 26 × CS 3 mm (📦 #1022)
1 object(s) - format STL
3D file of rubber ring with dimensions ID 26 mm × thickness 3 mm. The outer diameter resulting is therefore 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 27 × CS 3 mm (📦 #2782)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter 27 mm / section thickness 3 mm. External diameter (OD) resulting is 33 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 27 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 28 × CS 7 mm (📦 #1677)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7 mm. The outer diameter is 42 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 30 × CS 3 mm (📦 #1047)
1 object(s) - format STL
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8 mm. Final diameter resulting corresponds to 29.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2.8 | mm |